Product Details | CERAMIC DIELECTRIC FIXED CAPACITOR

5910-00-513-4755 A capacitor, whose capacitance value cannot be adjusted or varied, having a ceramic dielectric. It may be a single unit, or consist of two or more fixed units which cannot be separated.

Part Alternates: UY01270J, 5910-00-513-4755, 00-513-4755, 5910005134755, 005134755

Electrical and Electronic Equipment Components | Capacitors

Supply Group (FSG) NSN Assign. NIIN
59 03 AUG 1974 00-513-4755

Drawings & Photos | NSN 5910-00-513-4755


Cross Reference | NSN 5910-00-513-4755

Part Number Cage Code Manufacturer
UY01270J 51406 MURATA ERIE NORTH AMERICA INC HEADQUARTERS AND GEORGIA OPNS

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5910-00-513-4755

Technical Data | NSN 5910-00-513-4755

Characteristic Specifications
CAPACITANCE VALUE PER SECTION 27.000 PICOFARADS SINGLE SECTION
TOLERANCE RANGE PER SECTION -5.00 TO 5.00 PERCENT SINGLE SECTION
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION 300.0 DC SINGLE SECTION
TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS 95.0 SINGLE SECTION
TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS -20.0 TO 20.0 SINGLE SECTION
NONDERATED OPERATING TEMP -55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM
BODY STYLE 21A W/O MTG FACILITIES, TERMINALS ON OPPOSITE SURFACES
BODY LENGTH 0.109 INCHES NOMINAL
BODY WIDTH 0.063 INCHES NOMINAL
BODY HEIGHT 0.109 INCHES NOMINAL
SCHEMATIC DIAGRAM DESIGNATOR 1C NO COMMON OR GROUNDED ELECTRODE(S)
TERMINAL TYPE AND QUANTITY 2 RIBBON
TERMINAL LENGTH 0.875 INCHES MINIMUM
TERMINAL DIAMETER 0.050 INCHES NOMINAL
CASE MATERIAL GLASS
INSULATION RESISTANCE AT REFERENCE TEMP 1000000.0 MEGOHMS
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT 0.0002
QUALITY FACTOR AT REFERENCE TEMP 5000.0000
RELIABILITY INDICATOR NOT ESTABLISHED

Restrictions/Controls & Freight Information | NSN 5910-00-513-4755

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Precious Metals Indicator Code:UPrecious metal type is unknown
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
NMF Description 061400 CONDENSERS/PARTS NOI/CAPACITORS
Less than car load rating P 77.5
Less than truck load rating P 77.5
Water commodity Code 658 unknown
Originating Activity Code ZF France
ZG
ZH
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable