Product Details | PAPER DIELECTRIC FIXED CAPACITOR

5910-00-999-2414 A capacitor whose capacitance value cannot be adjusted or varied, having paper as the dielectric material. It may be a single unit or consist of two or more fixed units which cannot be seperated. For items whose dielectric material consist of plasticized (plastic impregnated) paper or paper-plastic combinations, see CAPACITOR, FIXED, PLASTIC DIELECTRIC. For items whose electrodes consist of a metallic film deposited (metallized) on the dielectric material, see CAPACITOR, FIXED, METALIZED, PAPER-PLASTIC DIELECTRIC.

Part Alternates: TKB165, 3079B, 5910-00-999-2414, 00-999-2414, 5910009992414, 009992414

Electrical and Electronic Equipment Components | Capacitors

Supply Group (FSG) NSN Assign. NIIN
59 20 JAN 1966 00-999-2414

Drawings & Photos | NSN 5910-00-999-2414


Cross Reference | NSN 5910-00-999-2414

Part Number Cage Code Manufacturer
3079B 52151 CONTINENTAL ELECTRONICS CORPORATION
TKB165 93790 CORNELL-DUBILIER ELECTRONICS

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5910-00-999-2414

Technical Data | NSN 5910-00-999-2414

Characteristic Specifications
CAPACITANCE VALUE PER SECTION 0.150 MICROFARADS SINGLE SECTION
TOLERANCE RANGE PER SECTION 0.00 TO 20.00 PERCENT SINGLE SECTION
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION 120000.0 DC SINGLE SECTION
NONDERATED OPERATING TEMP 10.0 DEG CELSIUS MINIMUM AND 60.0 DEG CELSIUS MAXIMUM
BODY STYLE 15A W/MTG TABS/FLANGES, TERMINAL(S) ON ONE SURFACE
BODY LENGTH 11.750 INCHES NOMINAL
BODY WIDTH 9.000 INCHES NOMINAL
BODY HEIGHT 42.500 INCHES NOMINAL
SCHEMATIC DIAGRAM DESIGNATOR 2C ELECTRODE(S) GROUNDED TO CASE
TERMINAL LENGTH 15.500 INCHES NOMINAL
TERMINAL DIAMETER 5.000 INCHES NOMINAL
CASE MATERIAL METAL
INSULATION RESISTANCE AT REFERENCE TEMP 10000.0 MEGOHM-MICROFARADS
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT 0.4000
POWER FACTOR AT REFERENCE TEMP IN PERCENT 0.4000
QUALITY FACTOR AT REFERENCE TEMP 285.0000
RELIABILITY INDICATOR NOT ESTABLISHED
SPECIAL FEATURES T.O. 31P1-2FPT7-4; N/H/A CAPACITOR ASSY
III END ITEM IDENTIFICATION AN/FPT12, 9, 13, 14

Restrictions/Controls & Freight Information | NSN 5910-00-999-2414

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodeYInformation is in the Hazardous Materials Information System (HMIS)
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 061400 CONDENSERS/PARTS NOI/CAPACITORS
Less than car load rating
Less than truck load rating P 77.5
Water commodity Code 72D unknown
Originating Activity Code SG 403 SCMS/GUED
5215 Thurlow St, Suite 5, Bldg 70C
Wright-Patterson AFB OH 45433
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 5910-00-999-2414

Category Code Description
Budget Code9 General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.
Materiel Management Aggregation CodeEHSX:ELECTRONIC COMPONENTS
Price ValidationN The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
  • The price has not been analyzed or reviewed for accuracy.
  • ZOP or Standard price challenges are permissible, but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ?L? or?F?,the case must be evaluated locally where purchased or fabricated.
Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDFDepartment of the Air Force
Service OrganizationFU.S. Air Force
ReparabilityNStock Fund (except Munitions)
Acquisition Advice CodesZINSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
PG : Package