Product Details | PAPER-PLASTIC DIELECTRI METALLIZED FIXED CAPACITOR

5910-01-022-6503 A capacitor whose capacitance value cannot be adjusted or varied having paper, plastic, or any combination of paper and plastic as the dielectric material with a metallic film deposited thereon. It may be a single unit or consist of two or more units which cannot be separated.

Part Alternates: EP39K130, EP39K-130, LP88A1A104J, 9331084130, 933-1084-130, 5910-01-022-6503, 01-022-6503, 5910010226503, 010226503

Electrical and Electronic Equipment Components | Capacitors

Supply Group (FSG) NSN Assign. NIIN
59 02 JUN 1976 01-022-6503

Drawings & Photos | NSN 5910-01-022-6503


Demand History | NSN 5910-01-022-6503

Part Number Request Date QTY Origin
933-1084-130 2025-09-267 9 DIBBS
EP39K-130 2025-09-267 9 DIBBS
LP88A1A104J 2025-09-267 9 DIBBS
933-1084-130 2025-06-170 4 DIBBS
EP39K-130 2025-06-170 4 DIBBS
LP88A1A104J 2025-06-170 4 DIBBS
933-1084-130 2024-10-284 5 DIBBS
EP39K-130 2024-10-284 5 DIBBS
LP88A1A104J 2024-10-284 5 DIBBS
933-1084-130 2024-01-28 14 DIBBS
EP39K-130 2024-01-28 14 DIBBS
LP88A1A104J 2024-01-28 14 DIBBS
933-1084-130 2024-01-25 2 DIBBS
EP39K-130 2024-01-25 2 DIBBS
LP88A1A104J 2024-01-25 2 DIBBS
933-1084-130 2023-06-152 2 DIBBS
EP39K-130 2023-06-152 2 DIBBS
LP88A1A104J 2023-06-152 2 DIBBS
933-1084-130 2023-03-74 4 DIBBS
933-1084-130 2023-03-74 10 DIBBS
EP39K-130 2023-03-74 4 DIBBS
EP39K-130 2023-03-74 10 DIBBS
LP88A1A104J 2023-03-74 4 DIBBS
LP88A1A104J 2023-03-74 10 DIBBS
933-1084-130 2022-10-293 10 DIBBS
EP39K-130 2022-10-293 10 DIBBS
LP88A1A104J 2022-10-293 10 DIBBS
933-1084-130 2022-06-164 16 DIBBS
EP39K-130 2022-06-164 16 DIBBS
LP88A1A104J 2022-06-164 16 DIBBS
933-1084-130 2022-06-152 16 DIBBS
EP39K-130 2022-06-152 16 DIBBS
LP88A1A104J 2022-06-152 16 DIBBS
933-1084-130 2022-05-139 4 DIBBS
EP39K-130 2022-05-139 4 DIBBS
LP88A1A104J 2022-05-139 4 DIBBS
933-1084-130 2022-04-101 18 DIBBS
EP39K-130 2022-04-101 18 DIBBS
LP88A1A104J 2022-04-101 18 DIBBS
933-1084-130 2022-03-89 18 DIBBS
EP39K-130 2022-03-89 18 DIBBS
LP88A1A104J 2022-03-89 18 DIBBS
933-1084-130 2021-10-285 18 DIBBS
EP39K-130 2021-10-285 18 DIBBS
LP88A1A104J 2021-10-285 18 DIBBS
933-1084-130 2021-09-271 18 DIBBS
EP39K-130 2021-09-271 18 DIBBS
LP88A1A104J 2021-09-271 18 DIBBS
933-1084-130 2020-01-30 6 DIBBS
EP39K-130 2020-01-30 6 DIBBS
LP88A1A104J 2020-01-30 6 DIBBS
933-1084-130 2019-12-365 127 DIBBS
EP39K-130 2019-12-365 127 DIBBS
LP88A1A104J 2019-12-365 127 DIBBS
933-1084-130 2019-12-335 127 DIBBS
EP39K-130 2019-12-335 127 DIBBS
LP88A1A104J 2019-12-335 127 DIBBS

Cross Reference | NSN 5910-01-022-6503

Part Number Cage Code Manufacturer
933-1084-130 13499 ROCKWELL COLLINS, INC. DBA GOVERNMENT SYSTEMS
EP39K-130 99515 ELECTRON PRODUCTS INC
LP88A1A104J 01884 DEARBORN ELECTRONICS, INC.
LP88A1A104J 56289 SPRAGUE ELECTRIC CO WORLD HQS

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5910-01-022-6503

Technical Data | NSN 5910-01-022-6503

Characteristic Specifications
CAPACITANCE VALUE PER SECTION 0.100 MICROFARADS SINGLE SECTION
TOLERANCE RANGE PER SECTION -5.00 TO 5.00 PERCENT SINGLE SECTION
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION 50.0 DC SINGLE SECTION
NONDERATED OPERATING TEMP -55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM
BODY STYLE 26B W/O MTG FACILITIES, AXIAL TERMINALS
BODY DIAMETER 0.230 INCHES MAXIMUM
BODY LENGTH 0.400 INCHES MAXIMUM
SCHEMATIC DIAGRAM DESIGNATOR 1C NO COMMON OR GROUNDED ELECTRODE(S)
TERMINAL TYPE AND QUANTITY 2 UNINSULATED WIRE LEAD
TERMINAL LENGTH 1.625 INCHES MINIMUM
TERMINAL DIAMETER 0.025 INCHES NOMINAL
CASE MATERIAL PLASTIC
INSULATION RESISTANCE AT REFERENCE TEMP 50000.0 MEGOHM-MICROFARADS
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT 0.5000
RELIABILITY INDICATOR NOT ESTABLISHED
III TERMINAL SURFACE TREATMENT SOLDER
(NON-CORE DATA) OVERALL LENGTH 0.400 INCHES MAXIMUM
III INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP 250.0 MEGOHM-MICROFARADS
(NON-CORE DATA) OVERALL HEIGHT 0.230 INCHES MAXIMUM
(NON-CORE DATA) OVERALL WIDTH 0.230 INCHES MAXIMUM

Restrictions/Controls & Freight Information | NSN 5910-01-022-6503

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:UPrecious metal type is unknown
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
NMF Description 061400 CONDENSERS/PARTS NOI/CAPACITORS
Less than car load rating
Less than truck load rating P 77.5
Water commodity Code 72D unknown
Originating Activity Code TX Defense Supply Center Columbus
Columbus, OH 43218
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 5910-01-022-6503

Category Code Description
Budget Code9 General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.
Materiel Management Aggregation CodeEHSX:ELECTRONIC COMPONENTS
Price ValidationN The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
  • The price has not been analyzed or reviewed for accuracy.
  • ZOP or Standard price challenges are permissible, but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ?L? or?F?,the case must be evaluated locally where purchased or fabricated.
Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDFDepartment of the Air Force
Service OrganizationFU.S. Air Force
ReparabilityNStock Fund (except Munitions)
Acquisition Advice CodesZINSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each
Category Code Description
Cognizance Codes9BNavy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDNDepartment of the Navy
Service OrganizationNU.S. Navy
Acquisition Advice CodesZINSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each