Product Details | PAPER-PLASTIC DIELECTRI METALLIZED FIXED CAPACITOR

5910-01-075-7115 A capacitor whose capacitance value cannot be adjusted or varied having paper, plastic, or any combination of paper and plastic as the dielectric material with a metallic film deposited thereon. It may be a single unit or consist of two or more units which cannot be separated.

Part Alternates: B1A224F, HS794905, HS7949-05, 650D1B224F, 10561405, 5910-01-075-7115, 01-075-7115, 5910010757115, 010757115

Electrical and Electronic Equipment Components | Capacitors

Supply Group (FSG) NSN Assign. NIIN
59 25 APR 1979 01-075-7115

Drawings & Photos | NSN 5910-01-075-7115


Cross Reference | NSN 5910-01-075-7115

Part Number Cage Code Manufacturer
10561405 20227 HENLEY MARINE, INC
650D1B224F 14752 ELECTROCUBE, INC.
B1A224F 12406 ELPAC ELECTRONICS INC
HS7949-05 12406 ELPAC ELECTRONICS INC

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5910-01-075-7115

Technical Data | NSN 5910-01-075-7115

Characteristic Specifications
CAPACITANCE VALUE PER SECTION 0.220 MICROFARADS SINGLE SECTION
TOLERANCE RANGE PER SECTION -1.00 TO 1.00 PERCENT SINGLE SECTION
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION 100.0 DC SINGLE SECTION
NONDERATED OPERATING TEMP -55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM
BODY STYLE 26B W/O MTG FACILITIES, AXIAL TERMINALS
BODY DIAMETER 0.220 INCHES NOMINAL
BODY LENGTH 0.530 INCHES NOMINAL
SCHEMATIC DIAGRAM DESIGNATOR 1C NO COMMON OR GROUNDED ELECTRODE(S)
TERMINAL TYPE AND QUANTITY 2 UNINSULATED WIRE LEAD
TERMINAL LENGTH 1.500 INCHES MINIMUM
TERMINAL DIAMETER 0.020 INCHES NOMINAL
CASE MATERIAL PLASTIC
INSULATION RESISTANCE AT REFERENCE TEMP 25000.0 MEGOHM-MICROFARADS
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT 0.3000
RELIABILITY INDICATOR NOT ESTABLISHED
III TERMINAL SURFACE TREATMENT SOLDER
(NON-CORE DATA) OVERALL LENGTH 0.530 INCHES NOMINAL
III INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP 50.0 MEGOHM-MICROFARADS
(NON-CORE DATA) OVERALL HEIGHT 0.220 INCHES NOMINAL
(NON-CORE DATA) OVERALL WIDTH 0.220 INCHES NOMINAL

Restrictions/Controls & Freight Information | NSN 5910-01-075-7115

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Precious Metals Indicator Code:UPrecious metal type is unknown
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
NMF Description 061400 CONDENSERS/PARTS NOI/CAPACITORS
Less than car load rating
Less than truck load rating P 77.5
Water commodity Code 72D unknown
Originating Activity Code TX Defense Supply Center Columbus
Columbus, OH 43218
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable