NSN 5910-01-087-8386 01-087-8386, 010878386
Product Details | CERAMIC DIELECTRIC FIXED CAPACITOR
5910-01-087-8386 A capacitor, whose capacitance value cannot be adjusted or varied, having a ceramic dielectric. It may be a single unit, or consist of two or more fixed units which cannot be separated.
Part Alternates: 5910-01-087-8386, 01-087-8386, 5910010878386, 010878386
Electrical and Electronic Equipment Components | Capacitors
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | 01-087-8386 | 00007 ( CAPACITOR, FIXED, CERAMIC DIELECTRIC ) |
Drawings & Photos | NSN 5910-01-087-8386
Cross Reference | NSN 5910-01-087-8386
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| CDR25BG180EFSM | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY |
| CDR25BG180EFSR | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY |
| CDR25BG180EGSM | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY |
| CDR25BG180EJSM | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY |
| CY89D180G | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY |
| MIL-C-55681/5 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY |
| UY22180G | 51406 | MURATA ERIE NORTH AMERICA INC HEADQUARTERS AND GEORGIA OPNS |
Request a Quote
What Our Customers Say
Thank you very much for the excellent service and professional customer care.
The service was excellent. I can think of no improvements to date that you can make regarding internet sales.
The representative for WBParts was efficient & handled our request in a timely & professional manner.
Tried two other sources, neither of them responded, was all done online, never spoke to anyone.
The response is quick and the price is often very good. We are completely satisfied.
Compare
Related Products | NSN 5910-01-087-8386
Technical Data | NSN 5910-01-087-8386
| Characteristic | Specifications |
|---|---|
| CAPACITANCE VALUE PER SECTION | 18.000 PICOFARADS SINGLE SECTION |
| TOLERANCE RANGE PER SECTION | -2.00 TO 2.00 PERCENT SINGLE SECTION |
| NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 500.0 DC SINGLE SECTION |
| TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS | 90.0 SINGLE SECTION |
| TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS | -20.0 TO 20.0 SINGLE SECTION |
| NONDERATED OPERATING TEMP | -55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM |
| BODY STYLE | 21A W/O MTG FACILITIES, TERMINALS ON OPPOSITE SURFACES |
| BODY LENGTH | 0.135 INCHES NOMINAL |
| BODY WIDTH | 0.110 INCHES NOMINAL |
| BODY HEIGHT | 0.060 INCHES MINIMUM AND 0.100 INCHES MAXIMUM |
| SCHEMATIC DIAGRAM DESIGNATOR | 1C NO COMMON OR GROUNDED ELECTRODE(S) |
| TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD |
| TERMINAL LENGTH | 0.500 INCHES MINIMUM |
| TERMINAL DIAMETER | 0.016 INCHES NOMINAL |
| CASE MATERIAL | CERAMIC OR GLASS |
| INSULATION RESISTANCE AT REFERENCE TEMP | 1000000.0 MEGOHMS |
| DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 0.0500 |
| QUALITY FACTOR AT REFERENCE TEMP | 1000.0000 |
| RELIABILITY INDICATOR | ESTABLISHED |
| RELIABILITY FAILURE RATE LEVEL IN PERCENT | 1.0000 |
| TEST DATA DOCUMENT | 81349-MIL-C-55681 SPECIFICATION |
| SPECIFICATION/STANDARD DATA | 81349-MIL-C-55681/5 GOVERNMENT SPECIFICATION |
| III TERMINAL SURFACE TREATMENT | SOLDER |
| (NON-CORE DATA) OVERALL LENGTH | 0.135 INCHES NOMINAL |
| III INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP | 100000.0 MEGOHMS |
| (NON-CORE DATA) OVERALL HEIGHT | 0.060 INCHES MINIMUM AND 0.100 INCHES MAXIMUM |
| (NON-CORE DATA) OVERALL WIDTH | 0.110 INCHES NOMINAL |
| MANUFACTURERS CODE | 81349 |
| DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | CDR25BG180EGSM |
| MANUFACTURERS CODE | 81349 |
| NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MIL-C-55681/5 |
Restrictions/Controls & Freight Information | NSN 5910-01-087-8386
| Category | Code | Description |
|---|---|---|
| Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
| Category | Code | Description |
|---|---|---|
| No Freight Information | ||