Product Details | CERAMIC DIELECTRIC FIXED CAPACITOR

5910-01-088-4849 A capacitor, whose capacitance value cannot be adjusted or varied, having a ceramic dielectric. It may be a single unit, or consist of two or more fixed units which cannot be separated.

Part Alternates: CDR14BG270EGSM, MIL-C-55681/4, MILC556814, 5910-01-088-4849, 01-088-4849, 5910010884849, 010884849

Electrical and Electronic Equipment Components | Capacitors

Supply Group (FSG) NSN Assign. NIIN
59 14 JAN 1980 01-088-4849

Drawings & Photos | NSN 5910-01-088-4849


Cross Reference | NSN 5910-01-088-4849

Part Number Cage Code Manufacturer
CDR14BG270EGSM 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
MIL-C-55681/4 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5910-01-088-4849

Technical Data | NSN 5910-01-088-4849

Characteristic Specifications
CAPACITANCE VALUE PER SECTION 27.000 PICOFARADS SINGLE SECTION
TOLERANCE RANGE PER SECTION -2.00 TO 2.00 PERCENT SINGLE SECTION
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION 500.0 DC SINGLE SECTION
TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS 90.0 SINGLE SECTION
TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS -20.0 TO 20.0 SINGLE SECTION
NONDERATED OPERATING TEMP -55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM
BODY STYLE 45A CHIP TYPE
BODY LENGTH 0.110 INCHES MAXIMUM
BODY WIDTH 0.110 INCHES MAXIMUM
BODY HEIGHT 0.102 INCHES MAXIMUM
SCHEMATIC DIAGRAM DESIGNATOR 1C NO COMMON OR GROUNDED ELECTRODE(S)
TERMINAL TYPE AND QUANTITY 2 BONDING PAD
CASE MATERIAL CERAMIC OR GLASS
INSULATION RESISTANCE AT REFERENCE TEMP 100000.0 MEGOHMS
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT 0.0200
RELIABILITY INDICATOR ESTABLISHED
RELIABILITY FAILURE RATE LEVEL IN PERCENT 1.0000
TEST DATA DOCUMENT 81349-MIL-C-55681 SPECIFICATION
SPECIFICATION/STANDARD DATA 81349-MIL-C-55681/4 GOVERNMENT SPECIFICATION
(NON-CORE DATA) OVERALL LENGTH 0.110 INCHES MAXIMUM
(NON-CORE DATA) PRECIOUS MATERIAL SILVER
III PRECIOUS MATERIAL AND LOCATION TERMINALS SILVER
(NON-CORE DATA) OVERALL HEIGHT 0.102 INCHES MAXIMUM
(NON-CORE DATA) OVERALL WIDTH 0.110 INCHES MAXIMUM
MANUFACTURERS CODE 81349
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE CDR14BG270EGSM
MANUFACTURERS CODE 81349
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE MIL-C-55681/4

Restrictions/Controls & Freight Information | NSN 5910-01-088-4849

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Precious Metals Indicator Code:SItem contains silver
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 061400 CONDENSERS/PARTS NOI/CAPACITORS
Less than car load rating
Less than truck load rating P 77.5
Water commodity Code 658 unknown
Originating Activity Code TX Defense Supply Center Columbus
Columbus, OH 43218
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable