Product Details | MICA DIELECTRIC FIXED CAPACITOR

5910-01-128-2644 A capacitor, whose capacitance value cannot be adjusted or varied, having natural sheet mica or reconstituted flaked mica formed into sheets as the dielectric material. It may be a single unit, or consist of two or more fixed units which cannot be separated.

Part Alternates: CM20D351J, 5910-01-128-2644, 01-128-2644, 5910011282644, 011282644

Electrical and Electronic Equipment Components | Capacitors

Supply Group (FSG) NSN Assign. NIIN
59 20 MAR 1982 01-128-2644

Drawings & Photos | NSN 5910-01-128-2644


Cross Reference | NSN 5910-01-128-2644

Part Number Cage Code Manufacturer
CM20D351J 84171 ARCO ELECTRONICS

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5910-01-128-2644

Technical Data | NSN 5910-01-128-2644

Characteristic Specifications
CAPACITANCE VALUE PER SECTION 350.000 PICOFARADS SINGLE SECTION
TOLERANCE RANGE PER SECTION -5.00 TO 5.00 PERCENT SINGLE SECTION
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION 500.0 DC SINGLE SECTION
TEMP COEFFICIENT OF CAPACITANCE RANGE PER SECTION IN PPM PER DEG CELSIUS -100.0 TO 100.0 SINGLE SECTION
NONDERATED OPERATING TEMP -55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM
BODY STYLE 21A W/O MTG FACILITIES, TERMINALS ON OPPOSITE SURFACES
BODY LENGTH 0.781 INCHES NOMINAL
BODY WIDTH 0.218 INCHES NOMINAL
BODY HEIGHT 0.438 INCHES NOMINAL
SCHEMATIC DIAGRAM DESIGNATOR 1C NO COMMON OR GROUNDED ELECTRODE(S)
TERMINAL TYPE AND QUANTITY 2 UNINSULATED WIRE LEAD
TERMINAL LENGTH 1.120 INCHES NOMINAL
TERMINAL DIAMETER 0.025 INCHES NOMINAL
CASE MATERIAL PLASTIC
RELIABILITY INDICATOR NOT ESTABLISHED
III TERMINAL SURFACE TREATMENT SOLDER
(NON-CORE DATA) OVERALL LENGTH 0.781 INCHES NOMINAL
(NON-CORE DATA) OVERALL HEIGHT 0.438 INCHES NOMINAL
(NON-CORE DATA) OVERALL WIDTH 0.218 INCHES NOMINAL

Restrictions/Controls & Freight Information | NSN 5910-01-128-2644

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:BMunitions List Item - Mutilation (MUT) to the point of scrap required. (Formerly: Demilitarization not required. Trade Security Controls (TSCs) required at disposition.)
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
NMF Description 061400 CONDENSERS/PARTS NOI/CAPACITORS
Less than car load rating P 77.5
Less than truck load rating P 77.5
Water commodity Code 658 unknown
Originating Activity Code 9Z DLIS-K
Battle Creek, MI 49037-3084
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code Z unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable