NSN 5910-01-158-3714 01-158-3714, 011583714
Product Details | CERAMIC DIELECTRIC FIXED CAPACITOR
5910-01-158-3714 A capacitor, whose capacitance value cannot be adjusted or varied, having a ceramic dielectric. It may be a single unit, or consist of two or more fixed units which cannot be separated.
Part Alternates: 5910-01-158-3714, 01-158-3714, 5910011583714, 011583714
Electrical and Electronic Equipment Components | Capacitors
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | 01-158-3714 | 00007 ( CAPACITOR, FIXED, CERAMIC DIELECTRIC ) |
Drawings & Photos | NSN 5910-01-158-3714
Cross Reference | NSN 5910-01-158-3714
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| CDR12BP471AGSM | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY |
| CDR12BP471AGSR | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY |
| MIL-C-55681/4 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY |
| VJ0805A471GF | 95275 | VITRAMON INC PO BOX 544 BRIDGEPORT CT 06601 |
| VJ0805A471GFAM | 95275 | VITRAMON INC PO BOX 544 BRIDGEPORT CT 06601 |
Request a Quote
What Our Customers Say
Thank you very much for the excellent service and professional customer care.
The service was excellent. I can think of no improvements to date that you can make regarding internet sales.
The representative for WBParts was efficient & handled our request in a timely & professional manner.
Tried two other sources, neither of them responded, was all done online, never spoke to anyone.
The response is quick and the price is often very good. We are completely satisfied.
Compare
Related Products | NSN 5910-01-158-3714
Technical Data | NSN 5910-01-158-3714
| Characteristic | Specifications |
|---|---|
| CAPACITANCE VALUE PER SECTION | 470.000 PICOFARADS SINGLE SECTION |
| TOLERANCE RANGE PER SECTION | -2.00 TO 2.00 PERCENT SINGLE SECTION |
| NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 50.0 DC SINGLE SECTION |
| TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS | 0.0 SINGLE SECTION |
| TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS | -30.0 TO 30.0 SINGLE SECTION |
| NONDERATED OPERATING TEMP | -55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM |
| BODY STYLE | 45A CHIP TYPE |
| BODY LENGTH | 0.080 INCHES NOMINAL |
| BODY WIDTH | 0.050 INCHES NOMINAL |
| BODY HEIGHT | 0.050 INCHES MAXIMUM |
| SCHEMATIC DIAGRAM DESIGNATOR | 1C NO COMMON OR GROUNDED ELECTRODE(S) |
| TERMINAL TYPE AND QUANTITY | 2 BONDING PAD |
| TERMINAL LENGTH | 0.020 INCHES NOMINAL |
| CASE MATERIAL | CERAMIC |
| INSULATION RESISTANCE AT REFERENCE TEMP | 100000.0 MEGOHMS |
| DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 0.1000 |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| III TERMINAL SURFACE TREATMENT | PALLADIUM AND SILVER |
| (NON-CORE DATA) OVERALL LENGTH | 0.080 INCHES NOMINAL |
| III INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP | 10000.0 MEGOHMS |
| (NON-CORE DATA) PRECIOUS MATERIAL | PALLADIUM AND SILVER |
| III PRECIOUS MATERIAL AND LOCATION | TERMINAL SURFACES PALLADIUM AND TERMINAL SURFACES SILVER |
| (NON-CORE DATA) OVERALL HEIGHT | 0.050 INCHES MAXIMUM |
| (NON-CORE DATA) OVERALL WIDTH | 0.050 INCHES NOMINAL |
Restrictions/Controls & Freight Information | NSN 5910-01-158-3714
| Category | Code | Description |
|---|---|---|
| Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
| Category | Code | Description |
|---|---|---|
| No Freight Information | ||