Product Details | GAS DIELECTRIC FIXED CAPACITOR

5910-01-175-9835 A capacitor, whose capacitance value cannot be adjusted or varied. It may be a single unit, or consist of two or more fixed untis which cannot be separated. Its dielectric may be either gas or vacuum.

Part Alternates: 10-14761-00, 5910-01-175-9835, 01-175-9835, 5910011759835, 101476100, 011759835

Electrical and Electronic Equipment Components | Capacitors

Supply Group (FSG) NSN Assign. NIIN
59 06 APR 1984 01-175-9835

Drawings & Photos | NSN 5910-01-175-9835


Cross Reference | NSN 5910-01-175-9835

Part Number Cage Code Manufacturer
10-14761-00 15476 COMPAQ FEDERAL LLC

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5910-01-175-9835

Technical Data | NSN 5910-01-175-9835

Characteristic Specifications
CAPACITANCE VALUE PER SECTION 40.000 MICROFARADS SINGLE SECTION
TOLERANCE RANGE PER SECTION -0.00 TO 20.00 PERCENT SINGLE SECTION
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION 260.0 DC SINGLE SECTION
NONDERATED OPERATING TEMP -55.0 DEG CELSIUS MINIMUM AND 85.0 DEG CELSIUS MAXIMUM
BODY STYLE 6B W/MTG BRACKET, TERMINAL(S) ON ONE END
BODY DIAMETER 1.933 INCHES NOMINAL
BODY LENGTH 6.250 INCHES NOMINAL
SCHEMATIC DIAGRAM DESIGNATOR 1C NO COMMON OR GROUNDED ELECTRODE(S)
TERMINAL TYPE AND QUANTITY 2 QUICK DISCONNECT, MALE, FOUR BLADE
TERMINAL LENGTH 0.750 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO DIAMETER 1.988 INCHES NOMINAL
CASE MATERIAL METAL
CASE INSULATION MATERIAL PLASTIC
MOUNTING FACILITY TYPE AND QUANTITY 4 UNTHREADED MOUNTING HOLES
UNTHREADED MOUNTING HOLE DIAMETER 0.174 INCHES NOMINAL
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH 5.133 INCHES NOMINAL
III TERMINAL SURFACE TREATMENT SOLDER
(NON-CORE DATA) OVERALL LENGTH 7.000 INCHES NOMINAL
(NON-CORE DATA) OVERALL HEIGHT 1.933 INCHES NOMINAL
(NON-CORE DATA) OVERALL WIDTH 1.933 INCHES NOMINAL

Restrictions/Controls & Freight Information | NSN 5910-01-175-9835

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
NMF Description 061400 CONDENSERS/PARTS NOI/CAPACITORS
Less than car load rating
Less than truck load rating P 77.5
Water commodity Code 72D unknown
Originating Activity Code TX Defense Supply Center Columbus
Columbus, OH 43218
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable