Product Details | PAPER-PLASTIC DIELECTRI METALLIZED FIXED CAPACITOR

5910-01-178-6761 A capacitor whose capacitance value cannot be adjusted or varied having paper, plastic, or any combination of paper and plastic as the dielectric material with a metallic film deposited thereon. It may be a single unit or consist of two or more units which cannot be separated.

Part Alternates: 40283, 5910-01-178-6761, 01-178-6761, 5910011786761, 011786761

Electrical and Electronic Equipment Components | Capacitors

Supply Group (FSG) NSN Assign. NIIN
59 09 MAY 1984 01-178-6761

Drawings & Photos | NSN 5910-01-178-6761


Cross Reference | NSN 5910-01-178-6761

Part Number Cage Code Manufacturer
40283 99167 HAMILTON SUNDSTRAND CORPORATION

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5910-01-178-6761

Technical Data | NSN 5910-01-178-6761

Characteristic Specifications
CAPACITANCE VALUE PER SECTION 2.000 MICROFARADS SINGLE SECTION
TOLERANCE RANGE PER SECTION -20.00 TO 20.00 PERCENT SINGLE SECTION
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION 400.0 DC SINGLE SECTION
NONDERATED OPERATING TEMP -30.0 DEG CELSIUS MINIMUM AND 100.0 DEG CELSIUS MAXIMUM
BODY STYLE 26B W/O MTG FACILITIES, AXIAL TERMINALS
BODY DIAMETER 0.938 INCHES MAXIMUM
BODY LENGTH 2.562 INCHES MAXIMUM
SCHEMATIC DIAGRAM DESIGNATOR 1C NO COMMON OR GROUNDED ELECTRODE(S)
TERMINAL TYPE AND QUANTITY 2 UNINSULATED WIRE LEAD
TERMINAL LENGTH 1.500 INCHES MINIMUM
TERMINAL DIAMETER 0.044 INCHES MAXIMUM
CASE MATERIAL PLASTIC
INSULATION RESISTANCE AT REFERENCE TEMP 3000.0 MEGOHMS
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT 1.0000
RELIABILITY INDICATOR NOT ESTABLISHED
III TERMINAL SURFACE TREATMENT SOLDER
(NON-CORE DATA) OVERALL LENGTH 2.562 INCHES MAXIMUM
III INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP 150.0 MEGOHMS
(NON-CORE DATA) OVERALL HEIGHT 0.938 INCHES MAXIMUM
(NON-CORE DATA) OVERALL WIDTH 0.938 INCHES MAXIMUM

Restrictions/Controls & Freight Information | NSN 5910-01-178-6761

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
NMF Description 061400 CONDENSERS/PARTS NOI/CAPACITORS
Less than car load rating
Less than truck load rating P 77.5
Water commodity Code 72D unknown
Originating Activity Code TX Defense Supply Center Columbus
Columbus, OH 43218
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable