Product Details | PAPER-PLASTIC DIELECTRI METALLIZED FIXED CAPACITOR

5910-01-209-2217 A capacitor whose capacitance value cannot be adjusted or varied having paper, plastic, or any combination of paper and plastic as the dielectric material with a metallic film deposited thereon. It may be a single unit or consist of two or more units which cannot be separated.

Part Alternates: 325P405X6370M30P3X, 325P405X6370M30P4X, 5910-01-209-2217, 01-209-2217, 5910012092217, 012092217

Electrical and Electronic Equipment Components | Capacitors

Supply Group (FSG) NSN Assign. NIIN
59 25 MAY 1985 01-209-2217

Cross Reference | NSN 5910-01-209-2217

Part Number Cage Code Manufacturer
325P405X6370M30P3X 56289 SPRAGUE ELECTRIC CO WORLD HQS
325P405X6370M30P4X 56289 SPRAGUE ELECTRIC CO WORLD HQS

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5910-01-209-2217

Technical Data | NSN 5910-01-209-2217

Characteristic Specifications
CASE MATERIAL METAL
BODY LENGTH 3.000 INCHES NOMINAL
OVERALL LENGTH (NON-CORE) 3.468 INCHES NOMINAL
TOLERANCE RANGE PER SECTION -6.00 TO 6.00 PERCENT SINGLE SECTION
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION 370.0 AC-RMS SINGLE SECTION
OVERALL HEIGHT (NON-CORE) 1.750 INCHES NOMINAL
TERMINAL LENGTH 0.468 INCHES NOMINAL
TERMINAL SURFACE TREATMENT SOLDER
RELIABILITY INDICATOR NOT ESTABLISHED
TERMINAL TYPE AND QUANTITY 2 QUICK DISCONNECT, MALE, DOUBLE BLADE
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO DIAMETER 1.875 INCHES NOMINAL
BODY STYLE W/O MTG FACILITIES, TERMINAL(S) ON ONE END
CAPACITANCE VALUE PER SECTION 4.000 MICROFARADS SINGLE SECTION
SCHEMATIC DIAGRAM DESIGNATOR NO COMMON OR GROUNDED ELECTRODE(S)
BODY DIAMETER 1.750 INCHES NOMINAL
OVERALL WIDTH (NON-CORE) 1.750 INCHES NOMINAL
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT 0.1000
NONDERATED OPERATING TEMP -40.0 DEG CELSIUS MINIMUM AND 70.0 DEG CELSIUS MAXIMUM

Restrictions/Controls & Freight Information | NSN 5910-01-209-2217

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
NMF Description 061400 CONDENSERS/PARTS NOI/CAPACITORS
Less than car load rating
Less than truck load rating P 77.5
Water commodity Code 72D unknown
Originating Activity Code TX Defense Supply Center Columbus
Columbus, OH 43218
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 5910-01-209-2217

Category Code Description
Cognizance Codes9BNavy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDNDepartment of the Navy
Service OrganizationNU.S. Navy
Acquisition Advice CodesJNOT STOCKED, CENTRALLY PROCURED # (NON-STOCKED ITEMS) IMM/Service centrally managed but not stocked item. Procurement will be initiated only after receipt of a requisition.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each