Product Details | CERAMIC DIELECTRIC FIXED CAPACITOR

5910-01-215-7296 A capacitor, whose capacitance value cannot be adjusted or varied, having a ceramic dielectric. It may be a single unit, or consist of two or more fixed units which cannot be separated.

Part Alternates: 2DDH66N202K, 5910-01-215-7296, 01-215-7296, 5910012157296, 012157296

Electrical and Electronic Equipment Components | Capacitors

Supply Group (FSG) NSN Assign. NIIN
59 30 AUG 1985 01-215-7296

Cross Reference | NSN 5910-01-215-7296

Part Number Cage Code Manufacturer
2DDH66N202K 71590 CRL COMPONENTS INC

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5910-01-215-7296

Technical Data | NSN 5910-01-215-7296

Characteristic Specifications
INSULATION RESISTANCE AT REFERENCE TEMP 10000.0 MEGOHMS
OVERALL LENGTH (NON-CORE) 0.156 INCHES MAXIMUM
TERMINAL LENGTH 1.500 INCHES MINIMUM
BODY DIAMETER 0.370 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO DIAMETER 0.250 INCHES NOMINAL
TERMINAL SURFACE TREATMENT SOLDER
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT 2.0000
RELIABILITY INDICATOR NOT ESTABLISHED
OVERALL WIDTH (NON-CORE) 0.370 INCHES MAXIMUM
TOLERANCE RANGE PER SECTION -10.00 TO 10.00 PERCENT SINGLE SECTION
CASE MATERIAL PLASTIC
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION 1000.0 DC SINGLE SECTION
TERMINAL TYPE AND QUANTITY 2 UNINSULATED WIRE LEAD
VOLTAGE TEMP LIMITS PER SECTION IN PERCENT CAPACITANCE CHANGE -56.0 TO 22.0 WITH 500 VOLTS APPLIED SINGLE SECTION
CAPACITANCE VALUE PER SECTION 0.002 MICROFARADS SINGLE SECTION
OVERALL HEIGHT (NON-CORE) 0.495 INCHES MAXIMUM
SCHEMATIC DIAGRAM DESIGNATOR NO COMMON OR GROUNDED ELECTRODE(S)
BODY LENGTH 0.156 INCHES MAXIMUM
TERMINAL DIAMETER 0.025 INCHES NOMINAL
NONDERATED OPERATING TEMP 10.0 DEG CELSIUS MINIMUM AND 85.0 DEG CELSIUS MAXIMUM
BODY STYLE W/O MTG FACILITIES, RADIAL TERMINALS

Restrictions/Controls & Freight Information | NSN 5910-01-215-7296

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
NMF Description 061400 CONDENSERS/PARTS NOI/CAPACITORS
Less than car load rating
Less than truck load rating P 77.5
Water commodity Code 72D unknown
Originating Activity Code TX Defense Supply Center Columbus
Columbus, OH 43218
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 5910-01-215-7296

Category Code Description
Cognizance Codes9BNavy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDNDepartment of the Navy
Service OrganizationNU.S. Navy
Acquisition Advice CodesJNOT STOCKED, CENTRALLY PROCURED # (NON-STOCKED ITEMS) IMM/Service centrally managed but not stocked item. Procurement will be initiated only after receipt of a requisition.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each