Product Details | MICA DIELECTRIC FIXED CAPACITOR

5910-01-222-9865 A capacitor, whose capacitance value cannot be adjusted or varied, having natural sheet mica or reconstituted flaked mica formed into sheets as the dielectric material. It may be a single unit, or consist of two or more fixed units which cannot be separated.

Part Alternates: CMR1A1656SP, 8043601, 804360-1, 5910-01-222-9865, 01-222-9865, 5910012229865, 012229865

Electrical and Electronic Equipment Components | Capacitors

Supply Group (FSG) NSN Assign. NIIN
59 20 DEC 1985 01-222-9865

Demand History | NSN 5910-01-222-9865

Part Number Request Date QTY Origin
5910-01-222-9865 2008-03-79 100 DIBBS

Cross Reference | NSN 5910-01-222-9865

Part Number Cage Code Manufacturer
804360-1 96214 RAYTHEON COMPANY DBA RAYTHEON
CMR1A1656SP 23280 CUSTOM ELECTRONICS, INC.

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5910-01-222-9865

Technical Data | NSN 5910-01-222-9865

Characteristic Specifications
BODY WIDTH 0.300 INCHES MAXIMUM
INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP 50.0 MEGOHM-MICROFARADS
TOLERANCE RANGE PER SECTION -5.00 TO 5.00 PERCENT SINGLE SECTION
TERMINAL DIAMETER 0.040 INCHES NOMINAL
INSULATION RESISTANCE AT REFERENCE TEMP 5000.0 MEGOHM-MICROFARADS
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT 0.5000
CAPACITANCE VALUE PER SECTION 400.000 PICOFARADS SINGLE SECTION
NONDERATED OPERATING TEMP -55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM
TERMINAL SURFACE TREATMENT SOLDER
BODY LENGTH 1.688 INCHES MAXIMUM
RELIABILITY INDICATOR NOT ESTABLISHED
CASE MATERIAL PLASTIC
BODY STYLE W/O MTG FACILITIES, TERMINALS ON OPPOSITE SURFACES
TERMINAL LENGTH 2.000 INCHES MINIMUM
TEMP COEFFICIENT OF CAPACITANCE RANGE PER SECTION IN PPM PER DEG CELSIUS -2.0 TO 3.0 SINGLE SECTION
TERMINAL TYPE AND QUANTITY 2 UNINSULATED WIRE LEAD
OVERALL WIDTH (NON-CORE) 0.300 INCHES MAXIMUM
SCHEMATIC DIAGRAM DESIGNATOR NO COMMON OR GROUNDED ELECTRODE(S)
OVERALL HEIGHT (NON-CORE) 1.825 INCHES MAXIMUM
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION 12000.0 DC SINGLE SECTION
OVERALL LENGTH (NON-CORE) 1.688 INCHES MAXIMUM
BODY HEIGHT 1.825 INCHES MAXIMUM

Restrictions/Controls & Freight Information | NSN 5910-01-222-9865

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
NMF Description 061400 CONDENSERS/PARTS NOI/CAPACITORS
Less than car load rating
Less than truck load rating P 77.5
Water commodity Code 72D unknown
Originating Activity Code TX Defense Supply Center Columbus
Columbus, OH 43218
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 5910-01-222-9865

Category Code Description
Cognizance Codes9BNavy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDNDepartment of the Navy
Service OrganizationNU.S. Navy
Acquisition Advice CodesZINSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each