Product Details | CERAMIC DIELECTRIC FIXED CAPACITOR

5910-01-232-2764 A capacitor, whose capacitance value cannot be adjusted or varied, having a ceramic dielectric. It may be a single unit, or consist of two or more fixed units which cannot be separated.

Part Alternates: MR061A912GAA, VK30BA912G, 5910-01-232-2764, 01-232-2764, 5910012322764, 012322764

Electrical and Electronic Equipment Components | Capacitors

Supply Group (FSG) NSN Assign. NIIN
59 09 MAY 1986 01-232-2764

Cross Reference | NSN 5910-01-232-2764

Part Number Cage Code Manufacturer
MR061A912GAA 96095 AVX CORPORATION DBA OLEAN ADVANCED PRODUCTS
VK30BA912G 95275 VITRAMON INC PO BOX 544 BRIDGEPORT CT 06601

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5910-01-232-2764

Technical Data | NSN 5910-01-232-2764

Characteristic Specifications
BODY WIDTH 0.300 INCHES MAXIMUM
NONDERATED OPERATING TEMP -55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION 100.0 DC SINGLE SECTION
BODY HEIGHT 0.100 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH 0.200 INCHES NOMINAL
INSULATION RESISTANCE AT REFERENCE TEMP 100000.0 MEGOHMS
TERMINAL SURFACE TREATMENT SOLDER
RELIABILITY INDICATOR NOT ESTABLISHED
CASE MATERIAL PLASTIC
BODY STYLE W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
TERMINAL TYPE AND QUANTITY 2 UNINSULATED WIRE LEAD
QUALITY FACTOR AT REFERENCE TEMP 1000.000
TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS 0.0 SINGLE SECTION
BODY LENGTH 0.300 INCHES MAXIMUM
TERMINAL LENGTH 1.250 INCHES MINIMUM
OVERALL WIDTH (NON-CORE) 0.300 INCHES MAXIMUM
SCHEMATIC DIAGRAM DESIGNATOR NO COMMON OR GROUNDED ELECTRODE(S)
TOLERANCE RANGE PER SECTION -2.00 TO 2.00 PERCENT SINGLE SECTION
TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS -30.0 TO 30.0 SINGLE SECTION
TERMINAL DIAMETER 0.025 INCHES NOMINAL
CAPACITANCE VALUE PER SECTION 9100.000 PICOFARADS SINGLE SECTION
INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP 10000.0 MEGOHMS
OVERALL HEIGHT (NON-CORE) 0.100 INCHES MAXIMUM
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT 0.100
OVERALL LENGTH (NON-CORE) 0.300 INCHES MAXIMUM

Restrictions/Controls & Freight Information | NSN 5910-01-232-2764

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
NMF Description 061400 CONDENSERS/PARTS NOI/CAPACITORS
Less than car load rating
Less than truck load rating P 77.5
Water commodity Code 72D unknown
Originating Activity Code TX Defense Supply Center Columbus
Columbus, OH 43218
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable