NSN 5910-01-300-9729 01-300-9729, 013009729
Product Details | PLASTIC DIELECTRIC FIXED CAPACITOR
5910-01-300-9729 A capacitor whose capacitance value cannot be adjusted or varied, having a plastic, plastic film, plasticized (plastic impregnated) paper, or any combination of plastic and paper or plastic and paper films as the dielectric material. The plastic may be one or more types of synthetic compounds such as polyesters, polyfluorides, polycabonates, and the like. It may be a single unit, or consist of two or more fixed units which cannot be separated. For items whose electrodes consist of a metallic film deposited (metallized) on the dielectric material, see CAPACITOR, FIXED, METALLIZED, PAPER-PLASTIC DIELECTRIC.
Part Alternates: 5910-01-300-9729, 01-300-9729, 5910013009729, 013009729
Electrical and Electronic Equipment Components | Capacitors
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | 01-300-9729 | 00006 ( CAPACITOR, FIXED, PLASTIC DIELECTRIC ) |
Drawings & Photos | NSN 5910-01-300-9729
Request a Quote
What Our Customers Say
Thank you very much for the excellent service and professional customer care.
The service was excellent. I can think of no improvements to date that you can make regarding internet sales.
The representative for WBParts was efficient & handled our request in a timely & professional manner.
Tried two other sources, neither of them responded, was all done online, never spoke to anyone.
The response is quick and the price is often very good. We are completely satisfied.
Compare
Related Products | NSN 5910-01-300-9729
Technical Data | NSN 5910-01-300-9729
| Characteristic | Specifications |
|---|---|
| CAPACITANCE VALUE PER SECTION | 0.010 MICROFARADS SINGLE SECTION |
| TOLERANCE RANGE PER SECTION | -5.00 TO 5.00 PERCENT SINGLE SECTION |
| NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 50.0 DC SINGLE SECTION |
| NONDERATED OPERATING TEMP | -55.0 DEG CELSIUS MINIMUM AND 85.0 DEG CELSIUS MAXIMUM |
| BODY STYLE | 21A W/O MTG FACILITIES, TERMINALS ON OPPOSITE SURFACES |
| BODY LENGTH | 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM |
| BODY WIDTH | 0.110 INCHES MINIMUM AND 0.140 INCHES MAXIMUM |
| BODY HEIGHT | 0.250 INCHES MINIMUM AND 0.310 INCHES MAXIMUM |
| SCHEMATIC DIAGRAM DESIGNATOR | 1C NO COMMON OR GROUNDED ELECTRODE(S) |
| TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD |
| TERMINAL LENGTH | 1.625 INCHES MINIMUM |
| TERMINAL DIAMETER | 0.020 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM |
| CASE MATERIAL | PLASTIC |
| DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 0.250 |
| RELIABILITY INDICATOR | ESTABLISHED |
| RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.010 |
| TEST DATA DOCUMENT | 81349-MIL-C-55514 SPECIFICATION |
| SPECIFICATION/STANDARD DATA | 81349-MIL-C-55514/3 GOVERNMENT SPECIFICATION |
| III DIELECTRIC MATERIAL | PLASTIC |
| (NON-CORE DATA) OVERALL LENGTH | 0.515 INCHES MINIMUM AND 0.545 INCHES MAXIMUM |
| (NON-CORE DATA) OVERALL HEIGHT | 0.250 INCHES MINIMUM AND 0.310 INCHES MAXIMUM |
| (NON-CORE DATA) OVERALL WIDTH | 0.110 INCHES MINIMUM AND 0.140 INCHES MAXIMUM |
| MANUFACTURERS CODE | 81349 |
| DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | CFR04ASA103JR |
| MANUFACTURERS CODE | 81349 |
| NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MIL-C-55514/3 |
Restrictions/Controls & Freight Information | NSN 5910-01-300-9729
| Category | Code | Description |
|---|---|---|
| Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
| Category | Code | Description |
|---|---|---|
| No Freight Information | ||