Product Details | CERAMIC DIELECTRIC FIXED CAPACITOR

5910-01-305-4330 A capacitor, whose capacitance value cannot be adjusted or varied, having a ceramic dielectric. It may be a single unit, or consist of two or more fixed units which cannot be separated.

Part Alternates: BL1LB1124R, BL1LB1-124R, 100103170008, 1-001-0317-0008, 5910-01-305-4330, 01-305-4330, 5910013054330, 013054330

Electrical and Electronic Equipment Components | Capacitors

Supply Group (FSG) NSN Assign. NIIN
59 05 AUG 1989 01-305-4330

Drawings & Photos | NSN 5910-01-305-4330


Cross Reference | NSN 5910-01-305-4330

Part Number Cage Code Manufacturer
1-001-0317-0008 10933 AVIONIC INSTRUMENTS LLC
BL1LB1-124R 59942 AVX FILTERS CORPORATION

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5910-01-305-4330

Technical Data | NSN 5910-01-305-4330

Characteristic Specifications
CAPACITANCE VALUE PER SECTION 0.120 MICROFARADS SINGLE SECTION
TOLERANCE RANGE PER SECTION -0.00 TO 100.00 PERCENT SINGLE SECTION
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION 115.0 AC-RMS SINGLE SECTION AND 300.0 DC SINGLE SECTION
NONDERATED OPERATING TEMP -55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM
BODY STYLE 15B W/THD BUSHING MTG, TERMINALS ON OPPOSITE ENDS
BODY DIAMETER 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
BODY LENGTH 0.140 INCHES MINIMUM AND 0.160 INCHES MAXIMUM
SCHEMATIC DIAGRAM DESIGNATOR 17C FEEDTHROUGH
TERMINAL TYPE AND QUANTITY 2 UNINSULATED WIRE LEAD
TERMINAL LENGTH 0.122 INCHES MINIMUM AND 0.182 INCHES MAXIMUM
TERMINAL DIAMETER 0.030 INCHES MINIMUM AND 0.050 INCHES MAXIMUM
CASE MATERIAL METAL
MOUNTING FACILITY TYPE AND QUANTITY 1 THREADED BUSHING
MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR UNF
NOMINAL THREAD SIZE 0.250 INCHES
INSULATION RESISTANCE AT REFERENCE TEMP 1000.0 MEGOHMS
RELIABILITY INDICATOR NOT ESTABLISHED
III TERMINAL SURFACE TREATMENT SOLDER
(NON-CORE DATA) OVERALL LENGTH 0.742 INCHES NOMINAL
(NON-CORE DATA) OVERALL HEIGHT 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
(NON-CORE DATA) OVERALL WIDTH 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM

Restrictions/Controls & Freight Information | NSN 5910-01-305-4330

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
NMF Description 061400 CONDENSERS/PARTS NOI/CAPACITORS
Less than car load rating
Less than truck load rating P 77.5
Water commodity Code 72D unknown
Originating Activity Code TX Defense Supply Center Columbus
Columbus, OH 43218
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 5910-01-305-4330

Category Code Description
Cognizance Codes9BNavy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDNDepartment of the Navy
Service OrganizationNU.S. Navy
Acquisition Advice CodesZINSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each