Product Details | CERAMIC DIELECTRIC FIXED CAPACITOR

5910-01-315-1416 A capacitor, whose capacitance value cannot be adjusted or varied, having a ceramic dielectric. It may be a single unit, or consist of two or more fixed units which cannot be separated.

Part Alternates: SJ1G1271A, SJ1-G1-271A, 2499004X7R0271M, 2499-004-X7R0-271M, 3000109701, 300-01097-01, 5910-01-315-1416, 01-315-1416, 5910013151416, 013151416

Electrical and Electronic Equipment Components | Capacitors

Supply Group (FSG) NSN Assign. NIIN
59 10 FEB 1990 01-315-1416

Drawings & Photos | NSN 5910-01-315-1416


Cross Reference | NSN 5910-01-315-1416

Part Number Cage Code Manufacturer
2499-004-X7R0-271M 59660 TUSONIX, INC.
300-01097-01 95266 OECO, LLC DBA PACIFIC SCIENTIFIC OECO
SJ1-G1-271A 59442 HARAD CHEMICAL CO INC

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5910-01-315-1416

Technical Data | NSN 5910-01-315-1416

Characteristic Specifications
CAPACITANCE VALUE PER SECTION 270.000 PICOFARADS SINGLE SECTION
TOLERANCE RANGE PER SECTION -20.00 TO 20.00 PERCENT SINGLE SECTION
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION 1000.0 DC SINGLE SECTION
VOLTAGE TEMP LIMITS PER SECTION IN PERCENT CAPACITANCE CHANGE -15.0 TO 15.0 WITH 500 VOLTS APPLIED SINGLE SECTION
NONDERATED OPERATING TEMP -55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM
BODY STYLE 54B W/THD MTG BUSHING, TERMINALS ON OPPOSITE ENDS
WIDTH ACROSS FLATS 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM
BODY LENGTH 0.509 INCHES MINIMUM AND 0.539 INCHES MAXIMUM
SCHEMATIC DIAGRAM DESIGNATOR 17C FEEDTHROUGH
TERMINAL TYPE AND QUANTITY 2 UNINSULATED WIRE LEAD
TERMINAL LENGTH 0.218 INCHES MINIMUM AND 0.282 INCHES MAXIMUM
TERMINAL DIAMETER 0.047 INCHES MINIMUM AND 0.055 INCHES MAXIMUM
CASE MATERIAL METAL
MOUNTING FACILITY TYPE AND QUANTITY 1 THREADED BUSHING
MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR UNF
NOMINAL THREAD SIZE 0.216 INCHES
INSULATION RESISTANCE AT REFERENCE TEMP 10000.0 MEGOHMS
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT 3.000
RELIABILITY INDICATOR NOT ESTABLISHED
III TERMINAL SURFACE TREATMENT SOLDER
III END ITEM IDENTIFICATION 5805-01-187-9399 SWITCHBOARD,TEL
(NON-CORE DATA) OVERALL LENGTH 0.509 INCHES MINIMUM AND 0.539 INCHES MAXIMUM
(NON-CORE DATA) OVERALL WIDTH 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM

Restrictions/Controls & Freight Information | NSN 5910-01-315-1416

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
NMF Description 061400 CONDENSERS/PARTS NOI/CAPACITORS
Less than car load rating
Less than truck load rating P 77.5
Water commodity Code 72D unknown
Originating Activity Code TX Defense Supply Center Columbus
Columbus, OH 43218
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 5910-01-315-1416

Category Code Description
Stores Account Code1Marine Corps Stock Fund Account Item.
Combat Essentiality Code5Critical Repair Part to a Combat Essential End Item. Those parts or components whose failure in a combat essential end item will render the end item inoperative or reduce its effectiveness below the minimum acceptable level of efficiency.
Materiel Management CodeBAll CommoditiesDefense Logistics Agency, (DLA,)
Echelon Management Code2ICP/DSSC Marine Corps-managed Recoverability Code D items and Defense Logistics Agency (DLA)/TACOM/GSA) items which the integrated manager has not decontrolled.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDMU.S. Marine Corps
Service OrganizationMU.S. Marine Corps
ReparabilityZNonreparable item. When unserviceable, condemn and dispose at the level indicated by the first digit of the maintenance code.
Acquisition Advice CodesVTERMINAL ITEM # Identifies items in stock, but future procurement is not authorized. Requisitions may continue to be submitted until stocks are exhausted. Preferred item National Stock Number is normally provided by application of the phrase: When Exhausted Use (NSN). Requisitions will be submitted in accordance with IMM/Service requisitioning procedures as applicable.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Category Code Description
Cognizance Codes9BNavy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDNDepartment of the Navy
Service OrganizationNU.S. Navy
Acquisition Advice CodesJNOT STOCKED, CENTRALLY PROCURED # (NON-STOCKED ITEMS) IMM/Service centrally managed but not stocked item. Procurement will be initiated only after receipt of a requisition.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each