Product Details | CERAMIC DIELECTRIC FIXED CAPACITOR

5910-01-339-3969 A capacitor, whose capacitance value cannot be adjusted or varied, having a ceramic dielectric. It may be a single unit, or consist of two or more fixed units which cannot be separated.

Part Alternates: GN807BT103J05EF, 926CCOG103J050F, 5910-01-339-3969, 01-339-3969, 5910013393969, 013393969

Electrical and Electronic Equipment Components | Capacitors

Supply Group (FSG) NSN Assign. NIIN
59 22 MAY 1991 01-339-3969

Drawings & Photos | NSN 5910-01-339-3969


Cross Reference | NSN 5910-01-339-3969

Part Number Cage Code Manufacturer
926CCOG103J050F 56289 SPRAGUE ELECTRIC CO WORLD HQS
GN807BT103J05EF 26512 NORTHROP GRUMMAN SYSTEMS CORPORATION DIV NORTHROP GRUMMAN AEROSPACE

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5910-01-339-3969

Technical Data | NSN 5910-01-339-3969

Characteristic Specifications
SECTION QUANTITY 8
CAPACITANCE VALUE PER SECTION 0.010 MICROFARADS ALL SECTIONS
TOLERANCE RANGE PER SECTION -5.00 TO 5.00 PERCENT ALL SECTIONS
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION 50.0 DC ALL SECTIONS
TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS 0.0 ALL SECTIONS
TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS -30.0 TO 30.0 ALL SECTIONS
NONDERATED OPERATING TEMP -55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM
BODY STYLE 46A DUAL INLINE
BODY LENGTH 0.795 INCHES MAXIMUM
BODY WIDTH 0.300 INCHES NOMINAL
BODY HEIGHT 0.260 INCHES NOMINAL
SCHEMATIC DIAGRAM DESIGNATOR 16C SERIES CONNECTED
TERMINAL TYPE AND QUANTITY 16 PRINTED CIRCUIT
TERMINAL LENGTH 0.090 INCHES MINIMUM AND 0.110 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO WIDTH 0.350 INCHES NOMINAL
CASE MATERIAL CERAMIC
INSULATION RESISTANCE AT REFERENCE TEMP 100000.0 MEGOHMS
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT 0.100
RELIABILITY INDICATOR NOT ESTABLISHED
III TERMINAL SURFACE TREATMENT SOLDER
(NON-CORE DATA) OVERALL LENGTH 0.795 INCHES MAXIMUM
III INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP 10000.0 MEGOHMS
(NON-CORE DATA) OVERALL HEIGHT 0.260 INCHES NOMINAL
(NON-CORE DATA) OVERALL WIDTH 0.300 INCHES NOMINAL

Restrictions/Controls & Freight Information | NSN 5910-01-339-3969

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
NMF Description 061400 CONDENSERS/PARTS NOI/CAPACITORS
Less than car load rating
Less than truck load rating P 77.5
Water commodity Code 72D unknown
Originating Activity Code TX Defense Supply Center Columbus
Columbus, OH 43218
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 5910-01-339-3969

Category Code Description
Cognizance Codes9BNavy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDNDepartment of the Navy
Service OrganizationNU.S. Navy
Acquisition Advice CodesZINSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each