Product Details | MICA DIELECTRIC FIXED CAPACITOR

5910-01-362-4461 A capacitor, whose capacitance value cannot be adjusted or varied, having natural sheet mica or reconstituted flaked mica formed into sheets as the dielectric material. It may be a single unit, or consist of two or more fixed units which cannot be separated.

Part Alternates: CEM3A5184SP, 24876113, 2487611-3, 5910-01-362-4461, 01-362-4461, 5910013624461, 013624461

Electrical and Electronic Equipment Components | Capacitors

Supply Group (FSG) NSN Assign. NIIN
59 06 AUG 1992 01-362-4461

Drawings & Photos | NSN 5910-01-362-4461


Cross Reference | NSN 5910-01-362-4461

Part Number Cage Code Manufacturer
2487611-3 96214 RAYTHEON COMPANY DBA RAYTHEON
CEM3A5184SP 23280 CUSTOM ELECTRONICS, INC.

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5910-01-362-4461

Technical Data | NSN 5910-01-362-4461

Characteristic Specifications
SECTION QUANTITY 2
CAPACITANCE VALUE PER SECTION 0.00165 MICROFARADS ALL SECTIONS
TOLERANCE RANGE PER SECTION -5.00 TO 5.00 PERCENT ALL SECTIONS
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION 1400.0 DC ALL SECTIONS
NONDERATED OPERATING TEMP -55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM
BODY STYLE 30A W/THD HOLE(S)/STUD(S), TERMINAL(S) ON ONE SURFACE
BODY LENGTH 2.200 INCHES NOMINAL
BODY WIDTH 1.880 INCHES NOMINAL
BODY HEIGHT 1.200 INCHES NOMINAL
SCHEMATIC DIAGRAM DESIGNATOR 7C ONE TERMINAL COMMON TO EACH SECTION
TERMINAL TYPE AND QUANTITY 3 PIN
TERMINAL HEIGHT FROM BODY 0.250 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO WIDTH 0.750 INCHES NOMINAL
CASE MATERIAL PLASTIC
MOUNTING FACILITY TYPE AND QUANTITY 4 THREADED MOUNTING HOLES
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH 1.600 INCHES NOMINAL
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH 0.750 INCHES NOMINAL
RELIABILITY INDICATOR NOT ESTABLISHED
SPECIFICATION/STANDARD DATA 96214-2487611 MANUFACTURERS SPECIFICATION
III END ITEM IDENTIFICATION AN/APQ-171
MANUFACTURERS CODE 23280
DESIGN CONTROL REFERENCE CEM3A5184SP

Restrictions/Controls & Freight Information | NSN 5910-01-362-4461

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 061400 CONDENSERS/PARTS NOI/CAPACITORS
Less than car load rating
Less than truck load rating P 77.5
Water commodity Code 72D unknown
Originating Activity Code TG Warner-Robins Air Logistics Center
Robins AFB, GA 31098-5609
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 5910-01-362-4461

Category Code Description
Budget Code9 General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.
Price ValidationN The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
  • The price has not been analyzed or reviewed for accuracy.
  • ZOP or Standard price challenges are permissible, but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ?L? or?F?,the case must be evaluated locally where purchased or fabricated.
Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.
Materiel Management Aggregation CodeXZTG:FMS UNIQUE/WR-ALC
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDFDepartment of the Air Force
Service OrganizationFU.S. Air Force
ReparabilityNStock Fund (except Munitions)
Acquisition Advice CodesPRESTRICTED REQUISITION - SECURITY ASSISTANCE PROGRAM (SAP) 1. Indicates item is stocked or acquired only for SAP (replaces Military Assistance Program (MAP)) requirements, or 2. Indicates item is nonstocked and materiel is ordered from the contractor for shipment directly to the foreign government. 3. Base, post, camp, or station will not requisition.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each