Product Details | CERAMIC DIELECTRIC FIXED CAPACITOR

5910-01-383-8428 A capacitor, whose capacitance value cannot be adjusted or varied, having a ceramic dielectric. It may be a single unit, or consist of two or more fixed units which cannot be separated.

Part Alternates: 10216-0124, 838 553 C0J0 339 C, 838553C0J0339C, 5910-01-383-8428, 01-383-8428, 5910013838428, 102160124, 013838428

Electrical and Electronic Equipment Components | Capacitors

Supply Group (FSG) NSN Assign. NIIN
59 04 DEC 1993 01-383-8428

Drawings & Photos | NSN 5910-01-383-8428


Cross Reference | NSN 5910-01-383-8428

Part Number Cage Code Manufacturer
10216-0124 27914 HONEYWELL INTERNATIONAL INC DBA HONEYWELL
838 553 C0J0 339 C 59660 TUSONIX, INC.

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5910-01-383-8428

Technical Data | NSN 5910-01-383-8428

Characteristic Specifications
CAPACITANCE VALUE PER SECTION 3.300 PICOFARADS SINGLE SECTION
TOLERANCE RANGE PER SECTION -0.25 TO 0.25 PICOFARADS SINGLE SECTION
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION 1000.0 DC SINGLE SECTION
TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS 0.0 SINGLE SECTION
TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS -120.0 TO 120.0 SINGLE SECTION
NONDERATED OPERATING TEMP -55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM
BODY STYLE 22B W/O MTG FACILITIES, RADIAL TERMINALS
BODY DIAMETER 0.290 INCHES MAXIMUM
BODY LENGTH 0.156 INCHES MAXIMUM
SCHEMATIC DIAGRAM DESIGNATOR 1C NO COMMON OR GROUNDED ELECTRODE(S)
TERMINAL TYPE AND QUANTITY 2 UNINSULATED WIRE LEAD
TERMINAL LENGTH 1.500 INCHES MINIMUM
TERMINAL DIAMETER 0.025 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO DIAMETER 0.250 INCHES NOMINAL
CASE MATERIAL PLASTIC
RELIABILITY INDICATOR NOT ESTABLISHED
III TERMINAL SURFACE TREATMENT SOLDER
(NON-CORE DATA) OVERALL LENGTH 0.156 INCHES MAXIMUM
(NON-CORE DATA) OVERALL HEIGHT 0.290 INCHES MAXIMUM
(NON-CORE DATA) OVERALL WIDTH 0.290 INCHES MAXIMUM

Restrictions/Controls & Freight Information | NSN 5910-01-383-8428

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
No Freight Information

Management | NSN 5910-01-383-8428

Category Code Description
Materiel Management Aggregation CodeBATB:C-17 PROGRAM
Price ValidationN The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
  • The price has not been analyzed or reviewed for accuracy.
  • ZOP or Standard price challenges are permissible, but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ?L? or?F?,the case must be evaluated locally where purchased or fabricated.
Budget CodeS 1557X3010:Aircraft Replenishment Spares
Source of SupplyF77Boeing Military Transportation Aircraft
Los Angeles, CA 90307-3044
AgencyDFDepartment of the Air Force
Service OrganizationFU.S. Air Force
ReparabilityNStock Fund (except Munitions)
Acquisition Advice CodesJNOT STOCKED, CENTRALLY PROCURED # (NON-STOCKED ITEMS) IMM/Service centrally managed but not stocked item. Procurement will be initiated only after receipt of a requisition.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative