Product Details | RADIO FREQUENCY INTERFERENCE FILTER

5915-00-135-4259 An item designed to suppress undesired (interfering) frequencies and have a minimal effect on the desired frequencies when inserted in an electrical power circuit. Excludes items which consist of a single capacitor, inductor, resistor, or devices consisting of only two or more circuit elements of the same basic name. Excludes FILTER, LOW PASS and SUPPRESSOR, IGNITION INTERFERENCE. For items designed to be inserted in a line which is primarily intended to carry high frequency waves modulated with signals, such as antenna lead-in, see FILTER, BAND SUPPRESSION and FILTER, BAND PASS. See also LIMITER, ELECTRICAL NOISE.

Part Alternates: 22826-1077, 9020939, 5915-00-135-4259, 00-135-4259, 5915001354259, 228261077, 001354259

Electrical and Electronic Equipment Components | Filters and Networks

Supply Group (FSG) NSN Assign. NIIN
59 08 JAN 1969 00-135-4259

Drawings & Photos | NSN 5915-00-135-4259


Cross Reference | NSN 5915-00-135-4259

Part Number Cage Code Manufacturer
22826-1077 31435 LUCAS AEROSPACE POWER EQUIPMENT CORPORATION
22826-1077 3CPE0 SAFRAN POWER USA, LLC
9020939 18876 U S ARMY AVIATION AND MISSILE COMMAND

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5915-00-135-4259

Technical Data | NSN 5915-00-135-4259

Characteristic Specifications
SOURCE IMPEDANCE RATING PER FUNCTION 50.0 OHMS BLANK
LOAD IMPEDANCE PER FUNCTION 50.0 OHMS BLANK
OPERATING VOLTAGE RATING AND TYPE PER FUNCTION 100.0 VOLTS DC BLANK
OPERATING CURRENT RATING PER FUNCTION IN AMPS 160.0 BLANK
INCLOSURE TYPE ENCASED
FUNCTIONAL TERMINAL TYPE AND QUANTITY 1 THREADED STUD INPUT 1 THREADED STUD OUTPUT
STYLE DESIGNATOR 14 ROUND TERMINAL/TERMINALS ON OPPOSITE SURFACES
OVERALL LENGTH 1.660 INCHES NOMINAL
OVERALL HEIGHT 3.820 INCHES NOMINAL
OVERALL WIDTH 1.600 INCHES NOMINAL
BODY HEIGHT 2.570 INCHES NOMINAL
BODY OUTSIDE DIAMETER 1.320 INCHES MAXIMUM
DISTANCE BETWEEN MOUNTING SURFACE AND LOWER END 0.750 INCHES NOMINAL
MOUNTING FACILITY TYPE AND QUANTITY 4 UNTHREADED HOLE
UNTHREADED MOUNTING HOLE DIAMETER 0.190 INCHES NOMINAL
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH 1.300 INCHES NOMINAL
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH 1.100 INCHES NOMINAL
III OPERATING TEMP RANGE -65.0 TO 300.0 DEG FAHRENHEIT

Restrictions/Controls & Freight Information | NSN 5915-00-135-4259

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Precious Metals Indicator Code:UPrecious metal type is unknown
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
NMF Description 061400 CONDENSERS/PARTS NOI/CAPACITORS
Less than car load rating
Less than truck load rating P 77.5
Water commodity Code 658 unknown
Originating Activity Code TX Defense Supply Center Columbus
Columbus, OH 43218
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable