Product Details | RADIO FREQUENCY INTERFERENCE FILTER

5915-00-679-3093 An item designed to suppress undesired (interfering) frequencies and have a minimal effect on the desired frequencies when inserted in an electrical power circuit. Excludes items which consist of a single capacitor, inductor, resistor, or devices consisting of only two or more circuit elements of the same basic name. Excludes FILTER, LOW PASS and SUPPRESSOR, IGNITION INTERFERENCE. For items designed to be inserted in a line which is primarily intended to carry high frequency waves modulated with signals, such as antenna lead-in, see FILTER, BAND SUPPRESSION and FILTER, BAND PASS. See also LIMITER, ELECTRICAL NOISE.

Part Alternates: F532A, 532A, 5915-00-679-3093, 00-679-3093, 5915006793093, 006793093

Electrical and Electronic Equipment Components | Filters and Networks

Supply Group (FSG) NSN Assign. NIIN
59 01 JAN 1963 00-679-3093

Drawings & Photos | NSN 5915-00-679-3093


Demand History | NSN 5915-00-679-3093

Part Number Request Date QTY Origin
532A 2024-05-149 201 DIBBS
F532A 2024-05-149 201 DIBBS
532A 2024-05-137 201 DIBBS
F532A 2024-05-137 201 DIBBS
532A 2024-05-126 201 DIBBS
F532A 2024-05-126 201 DIBBS
532A 2024-04-98 141 DIBBS
F532A 2024-04-98 141 DIBBS
532A 2024-02-43 110 DIBBS
F532A 2024-02-43 110 DIBBS
532A 2023-10-292 76 DIBBS
F532A 2023-10-292 76 DIBBS
532A 2023-02-54 31 DIBBS
F532A 2023-02-54 31 DIBBS
5915-00-679-3093 2018-10-284 27 DIBBS
5915-00-679-3093 2018-05-151 31 DIBBS
5915-00-679-3093 2018-03-63 41 DIBBS
5915-00-679-3093 2018-02-36 17 DIBBS
5915-00-679-3093 2018-01-10 19 DIBBS
5915-00-679-3093 2017-11-334 20 DIBBS
5915-00-679-3093 2017-06-156 21 DIBBS
5915-00-679-3093 2017-05-143 21 DIBBS
5915-00-679-3093 2016-09-251 30 DIBBS
5915-00-679-3093 2015-03-64 32 DIBBS
5915-00-679-3093 2013-02-52 31 DIBBS
5915-00-679-3093 2012-11-319 29 DIBBS
5915-00-679-3093 2011-11-307 24 DIBBS
5915-00-679-3093 2011-07-190 24 DIBBS
5915-00-679-3093 2011-04-100 16 DIBBS
5915-00-679-3093 2011-04-91 17 DIBBS
5915-00-679-3093 2010-11-323 16 DIBBS
5915-00-679-3093 2010-10-291 20 DIBBS
5915-00-679-3093 2010-02-36 16 DIBBS
5915-00-679-3093 2009-12-344 15 DIBBS
5915-00-679-3093 2009-05-122 29 DIBBS
5915-00-679-3093 2009-04-107 27 DIBBS
5915-00-679-3093 2009-03-69 19 DIBBS
5915-00-679-3093 2009-02-42 20 DIBBS
5915-00-679-3093 2008-10-283 20 DIBBS
5915-00-679-3093 2008-08-232 20 DIBBS
532A 2006-05-143 2 Turkey
5915-00-679-3093 2006-05-143 2 Turkey
5915-00-679-3093 2006-05-143 2 Turkey

Cross Reference | NSN 5915-00-679-3093

Part Number Cage Code Manufacturer
532A 0AM43 LCR ELECTRONICS, INC.
F532A 0AM43 LCR ELECTRONICS, INC.

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5915-00-679-3093

Technical Data | NSN 5915-00-679-3093

Characteristic Specifications
SOURCE IMPEDANCE RATING PER FUNCTION 50.0 OHMS BLANK
LOAD IMPEDANCE PER FUNCTION 50.0 OHMS BLANK
OPERATING VOLTAGE RATING AND TYPE PER FUNCTION 50.0 VOLTS DC BLANK
MAXIMUM VOLTAGE DROP PER FUNCTION 0.5 VOLTS DC BLANK
INCLOSURE TYPE HERMETICALLY SEALED
FUNCTIONAL TERMINAL TYPE AND QUANTITY 1 WIRE LEAD INPUT-OUTPUT
STYLE DESIGNATOR 2 RECTANGULAR TERMINAL/TERMINALS ON ONE SURFACE
OVERALL HEIGHT 6.250 INCHES NOMINAL
BODY LENGTH 3.000 INCHES NOMINAL
BODY HEIGHT 1.250 INCHES NOMINAL
BODY WIDTH 1.156 INCHES NOMINAL
MOUNTING FACILITY TYPE AND QUANTITY 4 UNTHREADED HOLE
UNTHREADED MOUNTING HOLE DIAMETER 0.182 INCHES NOMINAL
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH 3.031 INCHES NOMINAL
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH 1.781 INCHES NOMINAL
III PRINCIPAL CIRCUITRY TYPE PER FUNCTION INDUCTANCE-CAPACITANCE BLANK
III OPERATING TEMP RANGE -55.0 TO 85.0 DEG CELSIUS
III BODY MATERIAL ALUMINUM
III BODY SURFACE TREATMENT CADMIUM

Restrictions/Controls & Freight Information | NSN 5915-00-679-3093

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
NMF Description 061990 ELECTRICAL EQUIP:FILTERS
Less than car load rating
Less than truck load rating P 77.5
Water commodity Code 72D unknown
Originating Activity Code XX
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 5915-00-679-3093

Category Code Description
Budget Code9 General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.
Materiel Management Aggregation CodeEHSX:ELECTRONIC COMPONENTS
Price ValidationN The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
  • The price has not been analyzed or reviewed for accuracy.
  • ZOP or Standard price challenges are permissible, but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ?L? or?F?,the case must be evaluated locally where purchased or fabricated.
Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDFDepartment of the Air Force
Service OrganizationFU.S. Air Force
ReparabilityNStock Fund (except Munitions)
Acquisition Advice CodesDDoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each
Category Code Description
Cognizance Codes9BNavy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDNDepartment of the Navy
Service OrganizationNU.S. Navy
Acquisition Advice CodesDDoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each