Product Details | RADIO FREQUENCY INTERFERENCE FILTER

5915-01-172-6574 An item designed to suppress undesired (interfering) frequencies and have a minimal effect on the desired frequencies when inserted in an electrical power circuit. Excludes items which consist of a single capacitor, inductor, resistor, or devices consisting of only two or more circuit elements of the same basic name. Excludes FILTER, LOW PASS and SUPPRESSOR, IGNITION INTERFERENCE. For items designed to be inserted in a line which is primarily intended to carry high frequency waves modulated with signals, such as antenna lead-in, see FILTER, BAND SUPPRESSION and FILTER, BAND PASS. See also LIMITER, ELECTRICAL NOISE.

Part Alternates: RF106235C, RF10623-5C, 4354315, 435431-5, 52508004, 52-508-004, 5915-01-172-6574, 01-172-6574, 5915011726574, 011726574

Electrical and Electronic Equipment Components | Filters and Networks

Supply Group (FSG) NSN Assign. NIIN
59 24 FEB 1984 01-172-6574

Drawings & Photos | NSN 5915-01-172-6574


Demand History | NSN 5915-01-172-6574

Part Number Request Date QTY Origin
52-508-004 2025-03-83 8 DIBBS
RF10623-5C 2025-03-83 8 DIBBS
52-508-004 2025-03-72 8 DIBBS
RF10623-5C 2025-03-72 8 DIBBS
52-508-004 2024-11-309 13 DIBBS
RF10623-5C 2024-11-309 13 DIBBS
52-508-004 2024-10-296 13 DIBBS
RF10623-5C 2024-10-296 13 DIBBS
52-508-004 2022-11-317 8 DIBBS
RF10623-5C 2022-11-317 8 DIBBS
52-508-004 2019-02-36 10 DIBBS
RF10623-5C 2019-02-36 10 DIBBS
52-508-004 2019-01-24 10 DIBBS
RF10623-5C 2019-01-24 10 DIBBS
5915-01-172-6574 2018-11-319 43 DIBBS
5915-01-172-6574 2018-04-99 15 DIBBS
5915-01-172-6574 2018-03-88 15 DIBBS
5915-01-172-6574 2018-03-75 15 DIBBS
5915-01-172-6574 2018-03-71 11 DIBBS
5915-01-172-6574 2018-03-64 15 DIBBS
5915-01-172-6574 2018-02-57 11 DIBBS
5915-01-172-6574 2018-02-46 11 DIBBS
5915-01-172-6574 2017-11-318 19 DIBBS
5915-01-172-6574 2017-11-306 10 DIBBS
5915-01-172-6574 2017-07-208 15 DIBBS
5915-01-172-6574 2017-05-149 15 DIBBS
5915-01-172-6574 2017-05-129 15 DIBBS
5915-01-172-6574 2016-03-87 28 DIBBS
5915-01-172-6574 2016-02-42 35 DIBBS
5915-01-172-6574 2016-02-35 30 DIBBS
5915-01-172-6574 2016-01-19 5 DIBBS
5915-01-172-6574 2016-01-05 5 DIBBS
5915-01-172-6574 2015-12-344 17 DIBBS
5915-01-172-6574 2015-12-340 8 DIBBS
5915-01-172-6574 2015-11-328 9 DIBBS
5915-01-172-6574 2015-10-278 4 DIBBS
5915-01-172-6574 2015-09-266 4 DIBBS
5915-01-172-6574 2015-08-217 11 DIBBS
5915-01-172-6574 2015-06-154 2 DIBBS
5915-01-172-6574 2015-05-145 2 DIBBS
5915-01-172-6574 2013-11-323 35 DIBBS
5915-01-172-6574 2009-12-343 6 DIBBS
5915-01-172-6574 2009-08-238 4 DIBBS
5915-01-172-6574 2009-08-238 47 DIBBS
5915-01-172-6574 2008-11-331 4 DIBBS
5915-01-172-6574 2008-11-331 5 DIBBS
5915-01-172-6574 2008-11-331 47 DIBBS
5915-01-172-6574 2007-05-145 10 DIBBS

Cross Reference | NSN 5915-01-172-6574

Part Number Cage Code Manufacturer
435431-5 00752 EDO CORPORATION DIV EDO CORPORATION AP&T
52-508-004 0LSP2 SPECTRUM CONTROL, INC. DBA ELECTROMAGNETIC DIVISION
52-508-004 33095 SPECTRUM CONTROL, INC. DBA API TECHNOLOGIES
RF10623-5C 13619 EMS DEVELOPMENT CORPORATION

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5915-01-172-6574

Technical Data | NSN 5915-01-172-6574

Characteristic Specifications
SOURCE IMPEDANCE RATING PER FUNCTION 1.0 OHMS 1ST RADIO INTERFERENCE 1.0 OHMS 2ND RADIO INTERFERENCE 1.0 OHMS 3RD RADIO INTERFERENCE
LOAD IMPEDANCE PER FUNCTION 0.95 OHMS 1ST RADIO INTERFERENCE 0.95 OHMS 2ND RADIO INTERFERENCE 0.95 OHMS 3RD RADIO INTERFERENCE
OPERATING VOLTAGE RATING AND TYPE PER FUNCTION 230.0 VOLTS AC 1ST RADIO INTERFERENCE 360.0 VOLTS AC 2ND RADIO INTERFERENCE 600.0 VOLTS DC 3RD RADIO INTERFERENCE
POWER LINE FREQUENCY RATING PER FUNCTION IN HERTZ 400.0 1ST RADIO INTERFERENCE 400.0 2ND RADIO INTERFERENCE 400.0 3RD RADIO INTERFERENCE
OPERATING CURRENT RATING PER FUNCTION IN AMPS 5.0 1ST RADIO INTERFERENCE 5.0 2ND RADIO INTERFERENCE 5.0 3RD RADIO INTERFERENCE
MAXIMUM VOLTAGE DROP PER FUNCTION 2.0 VOLTS AC 1ST RADIO INTERFERENCE 2.0 VOLTS AC 2ND RADIO INTERFERENCE 2.0 VOLTS AC 3RD RADIO INTERFERENCE
INCLOSURE TYPE HERMETICALLY SEALED
FUNCTIONAL TERMINAL TYPE AND QUANTITY 3 TAB, SOLDER LUG INPUT-OUTPUT
STYLE DESIGNATOR 15 RECTANGULAR TERMINAL/TERMINALS ON ADJACENT SURFACES
OVERALL HEIGHT 4.560 INCHES MAXIMUM
OVERALL WIDTH 3.500 INCHES MAXIMUM
BODY LENGTH 5.500 INCHES MAXIMUM
BODY WIDTH 1.250 INCHES MAXIMUM
MOUNTING FACILITY TYPE AND QUANTITY 4 THREADED STUD
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH 4.875 INCHES NOMINAL
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH 2.875 INCHES NOMINAL
MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR UNC
NOMINAL THREAD SIZE 0.380 INCHES
SPECIAL FEATURES NUCLEAR HARDENED CRITICAL DESIGN
CRITICALITY CODE JUSTIFICATION FEAT

Restrictions/Controls & Freight Information | NSN 5915-01-172-6574

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:DMunitions List Item or Commerce Control List Item. Demilitarization required. Total destruction of the item and components so as to preclude restoration or repair to a usable condition by melting, cutting, tearing, scratching, crushing, breaking, punching, neutralizing, etc. (As an alternate, burial or deep water dumping may be used when coordinated with the DoD Demilitarization Program Office.)
Controlled Inventory Item Code:7NON-SENSITIVE (SRC-N/A) - UNCLASSIFIED AA&E: OR ITEMS ASSIGNED A DEMILITARIZATION CODE OTHER THAN A, B, Q, OR P FOR WHICH ANOTHER CIIC IS INAPPROPRIATE. (NOTE: THE LOSS, THEFT, UNLAWFUL DISPOSITION, AND/OR RECOVERY OF AN ITEM WITH CIIC 7 WILL BE INVESTIGATED IN ACCORDANCE WITH DOD-4000-25-2-M AND DOD 7200.14-R, VOLUME 12, CHAPTER 7).
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:YThe item does not have a nuclear hardened feature but does have other critical feature(s) such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 061990 ELECTRICAL EQUIP:FILTERS
Less than car load rating
Less than truck load rating P 77.5
Water commodity Code 72D unknown
Originating Activity Code TG Warner-Robins Air Logistics Center
Robins AFB, GA 31098-5609
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 5915-01-172-6574

Category Code Description
Budget Code9 General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.
Materiel Management Aggregation CodeEWTG:AIRBORNE ELECTRONIC WARFARE EQUIPMENT
Price ValidationN The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
  • The price has not been analyzed or reviewed for accuracy.
  • ZOP or Standard price challenges are permissible, but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ?L? or?F?,the case must be evaluated locally where purchased or fabricated.
Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDFDepartment of the Air Force
Service OrganizationFU.S. Air Force
ReparabilityNStock Fund (except Munitions)
Acquisition Advice CodesDDoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Controlled Item Code7NON-SENSITIVE (SRC-N/A) - UNCLASSIFIED AA&E: OR ITEMS ASSIGNED A DEMILITARIZATION CODE OTHER THAN A, B, Q, OR P FOR WHICH ANOTHER CIIC IS INAPPROPRIATE. (NOTE: THE LOSS, THEFT, UNLAWFUL DISPOSITION, AND/OR RECOVERY OF AN ITEM WITH CIIC 7 WILL BE INVESTIGATED IN ACCORDANCE WITH DOD-4000-25-2-M AND DOD 7200.14-R, VOLUME 12, CHAPTER 7).
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each