Product Details | RADIO FREQUENCY INTERFERENCE FILTER

5915-01-212-0211 An item designed to suppress undesired (interfering) frequencies and have a minimal effect on the desired frequencies when inserted in an electrical power circuit. Excludes items which consist of a single capacitor, inductor, resistor, or devices consisting of only two or more circuit elements of the same basic name. Excludes FILTER, LOW PASS and SUPPRESSOR, IGNITION INTERFERENCE. For items designed to be inserted in a line which is primarily intended to carry high frequency waves modulated with signals, such as antenna lead-in, see FILTER, BAND SUPPRESSION and FILTER, BAND PASS. See also LIMITER, ELECTRICAL NOISE.

Part Alternates: XSP598S1, XSP598-S1, 71414182, 7141418-2, 5915-01-212-0211, 01-212-0211, 5915012120211, 012120211

Electrical and Electronic Equipment Components | Filters and Networks

Supply Group (FSG) NSN Assign. NIIN
59 05 JUL 1985 01-212-0211

Cross Reference | NSN 5915-01-212-0211

Part Number Cage Code Manufacturer
7141418-2 06481 NORTHROP GRUMMAN SYSTEMS CORPORATION
7141418-2 17863 LITTON SYSTEMS INC GUIDANCE AND CONTROL SYSTEMS DIV
XSP598-S1 09059 NATEL ENGINEERING COMPANY, INC. DBA POWERCUBE
XSP598-S1 31557 NATEL ENGINEERING COMPANY INC DBA POWERCUBE DIV POWERCUBE

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5915-01-212-0211

Technical Data | NSN 5915-01-212-0211

Characteristic Specifications
SOURCE IMPEDANCE RATING PER FUNCTION 50.0 OHMS 1ST RADIO INTERFERENCE 1ST FUNCTION
LOAD IMPEDANCE PER FUNCTION 50.0 OHMS 1ST RADIO INTERFERENCE 1ST FUNCTION
OPERATING VOLTAGE RATING AND TYPE PER FUNCTION 24.0 VOLTS DC 1ST RADIO INTERFERENCE 1ST FUNCTION
OPERATING CURRENT RATING PER FUNCTION IN AMPS 3.75 1ST RADIO INTERFERENCE 1ST FUNCTION
INCLOSURE TYPE ENCASED
FUNCTIONAL TERMINAL TYPE AND QUANTITY 2 PIN INPUT 1ST FUNCTION
STYLE DESIGNATOR RECTANGULAR TERMINAL/TERMINALS ON ONE SURFACE
OVERALL HEIGHT 1.520 INCHES MAXIMUM
BODY LENGTH 2.000 INCHES MAXIMUM
BODY HEIGHT 1.000 INCHES NOMINAL
BODY WIDTH 1.000 INCHES MAXIMUM
MOUNTING FACILITY TYPE AND QUANTITY 6 UNTHREADED HOLE ALL FUNCTIONS
UNTHREADED MOUNTING HOLE DIAMETER 0.150 INCHES NOMINAL
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH 1.750 INCHES NOMINAL
III PRINCIPAL CIRCUITRY TYPE PER FUNCTION INDUCTANCE-CAPACITANCE 1ST RADIO INTERFERENCE 1ST FUNCTION
III OPERATING TEMP RANGE -55.0 TO 100.0 DEG CELSIUS

Restrictions/Controls & Freight Information | NSN 5915-01-212-0211

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:BMunitions List Item - Mutilation (MUT) to the point of scrap required. (Formerly: Demilitarization not required. Trade Security Controls (TSCs) required at disposition.)
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
NMF Description 061990 ELECTRICAL EQUIP:FILTERS
Less than car load rating
Less than truck load rating P 77.5
Water commodity Code 72D unknown
Originating Activity Code TX Defense Supply Center Columbus
Columbus, OH 43218
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 5915-01-212-0211

Category Code Description
Cognizance Codes9BNavy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDNDepartment of the Navy
Service OrganizationNU.S. Navy
Acquisition Advice CodesZINSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each