NSN 5915-01-257-3478 NN070840, NN-0708-40, RF12170B

Product Details | RADIO FREQUENCY INTERFERENCE FILTER

5915-01-257-3478 An item designed to suppress undesired (interfering) frequencies and have a minimal effect on the desired frequencies when inserted in an electrical power circuit. Excludes items which consist of a single capacitor, inductor, resistor, or devices consisting of only two or more circuit elements of the same basic name. Excludes FILTER, LOW PASS and SUPPRESSOR, IGNITION INTERFERENCE. For items designed to be inserted in a line which is primarily intended to carry high frequency waves modulated with signals, such as antenna lead-in, see FILTER, BAND SUPPRESSION and FILTER, BAND PASS. See also LIMITER, ELECTRICAL NOISE.

Part Alternates: NN070840, NN-0708-40, RF12170B, FC2497, FS2573478, FS2573-478, 3427335061, 34-2733506-1, 5915-01-257-3478, 01-257-3478, 5915012573478, 012573478

Electrical and Electronic Equipment Components | Filters and Networks

Supply Group (FSG)	NSN Assign.	NIIN	Item Name Code (INC)
59	17 JUN 1987	01-257-3478	00765 ( FILTER, RADIO FREQUENCY INTERFERENCE )

Drawings & Photos | NSN 5915-01-257-3478

Part Number	Request Date	QTY	Origin
34-2733506-1	2023-01-24	9	DIBBS
FC2497	2023-01-24	9	DIBBS
FS2573-478	2023-01-24	9	DIBBS
NN-0708-40	2023-01-24	9	DIBBS
RF12170B	2023-01-24	9	DIBBS
34-2733506-1	2021-09-272	25	DIBBS
FC2497	2021-09-272	25	DIBBS
FS2573-478	2021-09-272	25	DIBBS
NN-0708-40	2021-09-272	25	DIBBS
RF12170B	2021-09-272	25	DIBBS
34-2733506-1	2021-03-81	16	DIBBS
FC2497	2021-03-81	16	DIBBS
FS2573-478	2021-03-81	16	DIBBS
NN-0708-40	2021-03-81	16	DIBBS
RF12170B	2021-03-81	16	DIBBS
5915-01-257-3478	2011-08-215	75	DIBBS
5915-01-257-3478	2011-08-213	32	DIBBS
5915-01-257-3478	2011-01-07	33	DIBBS
5915-01-257-3478	2010-08-215	22	DIBBS
5915-01-257-3478	2010-07-183	12	DIBBS
5915-01-257-3478	2010-03-63	17	DIBBS
5915-01-257-3478	2009-08-233	10	DIBBS
5915-01-257-3478	2009-07-212	4	DIBBS

Cross Reference | NSN 5915-01-257-3478

Part Number	Cage Code	Manufacturer
34-2733506-1	67032	GENERAL DYNAMICS C4 SYSTEMS, INC.
FC2497	56528	FIL-COIL (FC) INC.
FS2573-478	56662	FREQUENCY SELECTIVE NETWORKS INC
NN-0708-40	66239	JMK, INC.
RF12170B	13619	EMS DEVELOPMENT CORPORATION

Request a Quote

What Our Customers Say

Thank you very much for the excellent service and professional customer care.

Ernie G. Honeywell

The service was excellent. I can think of no improvements to date that you can make regarding internet sales.

John L. Raytheon

The representative for WBParts was efficient & handled our request in a timely & professional manner.

Karen G. General Dynamics

Tried two other sources, neither of them responded, was all done online, never spoke to anyone.

Rex S. US Airforce

The response is quick and the price is often very good. We are completely satisfied.

Patricia S. NASA

Compare

NSNs for Compare ( up to 4 ): Add 5915-01-257-3478

Compare

Related Products | NSN 5915-01-257-3478

5915-01-257-3484, 5915-01-257-4532, 5915-01-257-4533, 5915-01-257-4546, 5915-01-257-4713

Technical Data | NSN 5915-01-257-3478

Characteristic	Specifications
SOURCE IMPEDANCE RATING PER FUNCTION	50.0 OHMS BLANK
LOAD IMPEDANCE PER FUNCTION	50.0 OHMS BLANK
OPERATING VOLTAGE RATING AND TYPE PER FUNCTION	125.0 VOLTS AC BLANK
POWER LINE FREQUENCY RATING PER FUNCTION IN HERTZ	60.0 BLANK
OPERATING CURRENT RATING PER FUNCTION IN AMPS	40.0 BLANK
MAXIMUM VOLTAGE DROP PER FUNCTION	1.25 VOLTS AC BLANK
INCLOSURE TYPE	ENCASED
FUNCTIONAL TERMINAL TYPE AND QUANTITY	1 THREADED STUD INPUT 1 THREADED STUD OUTPUT
STYLE DESIGNATOR	5 RECTANGULAR TERMINAL/TERMINALS ON OPPOSITE SURFACES
OVERALL LENGTH	13.125 INCHES NOMINAL
BODY LENGTH	12.000 INCHES NOMINAL
BODY HEIGHT	3.000 INCHES NOMINAL
BODY WIDTH	3.000 INCHES NOMINAL
MOUNTING FACILITY TYPE AND QUANTITY	2 THREADED STUD 4 SLOT
MOUNTING SLOT WIDTH	0.300 INCHES NOMINAL
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH	2.000 INCHES NOMINAL
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH	2.000 INCHES NOMINAL
MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR	UNC
NOMINAL THREAD SIZE	0.375 INCHES
FEATURES PROVIDED	NUT AND WASHER
III PRINCIPAL CIRCUITRY TYPE PER FUNCTION	INDUCTANCE-CAPACITANCE BLANK
III MAXIMUM TEMP RISE	25.0 DEG CELSIUS
III FULL LOAD INSERTION LOSS FREQUENCIES IN MEGAHERTZ	0.0 AND 0.1 AND 1.0 AND 10.0 AND 100.0 AND 1000.0
III FULL LOAD MINIMUM INSERTION LOSS AT SPECIFIED FREQUENCY IN DECIBELS	38.0 AND 80.0 AND 80.0 AND 80.0 AND 80.0 AND 80.0
III MAXIMUM DIELECTRIC WITHSTANDING DC VOLTAGE	800.0 VOLTS AT SEA LEVEL
III VIBRATION RESISTANCE RANGE IN HERTZ	10.0 TO 500.0
III OPERATING TEMP RANGE	-55.0 TO 85.0 DEG CELSIUS
III BODY MATERIAL	METAL
III END ITEM IDENTIFICATION	5805-01-245-9058 SMALL EXTENSION

Restrictions/Controls & Freight Information | NSN 5915-01-257-3478

Restrictions
Freight

Category	Code	Description
Shelf-Life Code:	0	Nondeteriorative
Hazardous Material Indicator Code	P	There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:	D	Munitions List Item or Commerce Control List Item. Demilitarization required. Total destruction of the item and components so as to preclude restoration or repair to a usable condition by melting, cutting, tearing, scratching, crushing, breaking, punching, neutralizing, etc. (As an alternate, burial or deep water dumping may be used when coordinated with the DoD Demilitarization Program Office.)
Controlled Inventory Item Code:	7	NON-SENSITIVE (SRC-N/A) - UNCLASSIFIED AA&E: OR ITEMS ASSIGNED A DEMILITARIZATION CODE OTHER THAN A, B, Q, OR P FOR WHICH ANOTHER CIIC IS INAPPROPRIATE. (NOTE: THE LOSS, THEFT, UNLAWFUL DISPOSITION, AND/OR RECOVERY OF AN ITEM WITH CIIC 7 WILL BE INVESTIGATED IN ACCORDANCE WITH DOD-4000-25-2-M AND DOD 7200.14-R, VOLUME 12, CHAPTER 7).
Precious Metals Indicator Code:	A	Item does not contain precious metal
Criticality Code:	X	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

Category	Code	Description
NMF Description	061990	ELECTRICAL EQUIP:FILTERS
Less than car load rating
Less than truck load rating	P	77.5
Water commodity Code	72D	unknown
Originating Activity Code	TH	Defense Supply Center Columbus Columbus, OH 43215
Air Dimension Code	A	Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity	H	Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling	Z	No special handling required.
Special Handling Code	9	unknonwn
HAZMAT
Type of Cargo	Z	No special type of cargo code applicable

Management | NSN 5915-01-257-3478

Army

Category	Code	Description
Materiel Category and Inventory Manager	Q	Electronics Materiel (DLA/GSA Items)
Appropriation and Budget Activity	2	Stock Fund Secondary Items
Management Inventory Segment	2	NONREPARABLE ITEMS (Exclusive of Insurance and Provisioning Items). This code will be used to identify items which are not reparable.
Specific Group/Generic Code	0	Medical Materiel
Weapons Systems/End Item or Homogeneous Group	00	DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
Accounting Requirements Code	X	Expendable item. An item of Army property coded with an ARC of ?X? in the AMDF. Expendable items require no formal accountability after issue from a stock record account. Commercial and fabricated items similar to items coded ?X? in the AMDF are considered expendable items.
Source of Supply	SMS	Defense Logistics Agency Enterprise Business Systems
Agency	DA	Department of the Army
Service Organization	A	U.S. Army
Reparability	Z	This is a nonreparable item. If condemned or economically unserviceable, then dispose at the level authorized replace the item.
Acquisition Advice Codes	Z	INSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
Controlled Item Code	7	NON-SENSITIVE (SRC-N/A) - UNCLASSIFIED AA&E: OR ITEMS ASSIGNED A DEMILITARIZATION CODE OTHER THAN A, B, Q, OR P FOR WHICH ANOTHER CIIC IS INAPPROPRIATE. (NOTE: THE LOSS, THEFT, UNLAWFUL DISPOSITION, AND/OR RECOVERY OF AN ITEM WITH CIIC 7 WILL BE INVESTIGATED IN ACCORDANCE WITH DOD-4000-25-2-M AND DOD 7200.14-R, VOLUME 12, CHAPTER 7).
Shelf Life Code	0	Nondeteriorative
Purchasing	QTY UOM	1 EA : Each