NSN 5915-01-601-5810 GF579152X30, GF57915-2X30, 01-601-5810
Product Details | RADIO FREQUENCY INTERFERE FILTER
5915-01-601-5810 An item designed to suppress undesired (interfering) frequencies and have a minimal effect on the desired frequencies when inserted in an electrical power circuit. Excludes items which consist of a single capacitor, inductor, resistor, or devices consisting of only two or more circuit elements of the same basic name. Excludes FILTER, LOW PASS and SUPPRESSOR, IGNITION INTERFERENCE. For items designed to be inserted in a line which is primarily intended to carry high frequency waves modulated with signals, such as antenna lead-in, see FILTER, BAND SUPPRESSION and FILTER, BAND PASS. See also LIMITER, ELECTRICAL NOISE.
Part Alternates: GF579152X30, GF57915-2X30, 5915-01-601-5810, 01-601-5810, 5915016015810, 016015810
Electrical and Electronic Equipment Components | Filters and Networks
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | 19 JAN 2012 | 01-601-5810 | 00765 ( FILTER, RADIO FREQUENCY INTERFERENCE ) |
Demand History | NSN 5915-01-601-5810
| Part Number | Request Date | QTY | Origin |
|---|---|---|---|
| 5915-01-601-5810 | 2013-04-120 | 50 | US |
Cross Reference | NSN 5915-01-601-5810
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| GF57915-2X30 | 07294 | GENISCO FILTER CORP. |
Request a Quote
What Our Customers Say
Thank you very much for the excellent service and professional customer care.
The service was excellent. I can think of no improvements to date that you can make regarding internet sales.
The representative for WBParts was efficient & handled our request in a timely & professional manner.
Tried two other sources, neither of them responded, was all done online, never spoke to anyone.
The response is quick and the price is often very good. We are completely satisfied.
Compare
Related Products | NSN 5915-01-601-5810
Technical Data | NSN 5915-01-601-5810
| Characteristic | Specifications |
|---|---|
| INCLOSURE TYPE | HERMETICALLY SEALED |
| OVERALL LENGTH | 24.0 INCHES NOMINAL |
| OVERALL HEIGHT | 7.0 INCHES NOMINAL |
| BODY LENGTH | 21.3 INCHES NOMINAL |
| BODY HEIGHT | 7.0 INCHES NOMINAL |
| BODY WIDTH | 5.0 INCHES NOMINAL |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 9.5 INCHES NOMINAL |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | POWER FILTER |
| SPECIAL FEATURES | INSERTION LOSS:>100DB FROM 14KHZ THROUGH 10GHZ;VOLTAGE RATINGS:120/208 VAC (50/60,400 HZ)277/480 VAC (50/60HZ);VOLTAGE DROP:2% AT FULL RATED AC (UPF) LOAD;HARMONIC DISTORTION:4% MAX AT FULL RATED AC(UPF)LOAD;RF RADIATION:100 DB ISOLATION SHIELDING EFFECTIVENESS;AC CURRENT RATING:5 AMP TO 225 AMP |
| III UNPACKAGED UNIT WEIGHT | 40.0 POUNDS |
| III BODY MATERIAL | METAL |
Restrictions/Controls & Freight Information | NSN 5915-01-601-5810
| Category | Code | Description |
|---|---|---|
| Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
| Demilitarization Code: | Q | Strategic List Item (SLI). Demilitarization not required. SLI are non-MLI(Munitions List Items) controlled by the U.S. Dept. of Commerce through the Export Administration Regulations (EAR) and indicated on the Commerce Control List (CCL). Each CCL entry is preceded by a four-digit Export Control Commerce Control List Item (CCLI) – MUT to the point of scrap required outside the United States. Inside the United States, MUT is required when the DEMIL integrity code (IC) is “3” and MUT is not required when the DEMIL IC is “6.” |
| Electro-static Discharge Susceptible: | A | No known Electrostatic Discharge (ESD) or Electromagnetic Interference (EMI) sensitivity |
| Precious Metals Indicator Code: | A | Item does not contain precious metal |
| Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| Automatic Data Processing Equipment: | 0 | Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9) |
| Category | Code | Description |
|---|---|---|
| No Freight Information | ||