Product Details | RADIO FREQUENCY INTERFERENCE FILTER

5915-01-621-7057 An item designed to suppress undesired (interfering) frequencies and have a minimal effect on the desired frequencies when inserted in an electrical power circuit. Excludes items which consist of a single capacitor, inductor, resistor, or devices consisting of only two or more circuit elements of the same basic name. Excludes FILTER, LOW PASS and SUPPRESSOR, IGNITION INTERFERENCE. For items designed to be inserted in a line which is primarily intended to carry high frequency waves modulated with signals, such as antenna lead-in, see FILTER, BAND SUPPRESSION and FILTER, BAND PASS. See also LIMITER, ELECTRICAL NOISE.

Part Alternates: FN34123533, FN3412-35-33 , 5915-01-621-7057, 01-621-7057, 5915016217057, 016217057

Electrical and Electronic Equipment Components | Filters and Networks

Supply Group (FSG) NSN Assign. NIIN
59 2013259 01-621-7057

Cross Reference | NSN 5915-01-621-7057

Part Number Cage Code Manufacturer
FN3412-35-33 1N137 SCHAFFNER INC
FN3412-35-33 2S518 ALLIED ELECTRONICS INC SUB OF AVNET INC

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5915-01-621-7057

Technical Data | NSN 5915-01-621-7057

Characteristic Specifications
SPECIAL FEATURES RATED LOAD POWER 460VAC/60HZ: 25 HP, INPUT/OUTPUT CONNECTIONS -33, CAPACITOR DISCONNECTION -44, WT: 28KG
III END ITEM IDENTIFICATION TERMINAL DOPPLER WEATHER RADAR (TDWR)

Restrictions/Controls & Freight Information | NSN 5915-01-621-7057

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
No Freight Information