Product Details | ELECTRICAL SURGE ARRESTER

5920-01-628-8358 A circuit-protecting device which provides a discharge path for abnormal surges of high potential while consuming little or no power at normal operating voltage. Excludes items which absorb continuously recurring cyclic pulses. For resistors which are sensitive to voltage changes or used as elements in surge arresters, see RESISTOR, VOLTAGE SENSITIVE. See also ABSORBER, OVERVOLTAGE; AND CUTOUT DISK, PROTECTIVE.

Part Alternates: ISDPTL, IS-DPTL , VTC14730878 , 5920-01-628-8358, 01-628-8358, 5920016288358, 016288358

Electrical and Electronic Equipment Components | Fuses, Arrestors, Absorbers, and Protectors

Supply Group (FSG) NSN Assign. NIIN
59 2014162 01-628-8358

Cross Reference | NSN 5920-01-628-8358

Part Number Cage Code Manufacturer
IS-DPTL 30992 TRANSTECTOR SYSTEMS, INC.
VTC14730878 1TWS1 RELEVANT TECHNOLOGIES CORPORATION DBA VOXTECHNOLOGIES

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5920-01-628-8358

Technical Data | NSN 5920-01-628-8358

Characteristic Specifications
SPECIAL FEATURES TELCO TRUNK (UP TO 105VRMS RING VOLTAGE) TWISTED PAIR CABLE PROTECTOR, SURGE ARRESTOR, SURGE 40 KA, TURN ON 10MA +/-200 VDC, R 20 OHM +/-1%, C 2.4NF, ENERGY 550 J, LET THROUGH (PEAK OPEN CIRCUIT VOLTAGE AT MAX CURRENT) 200 VP, -3DB (600 OHM) BW 250 KHZ, P/O TEKCI ARRESTOR ASSEMBLY 170-008177
III END ITEM IDENTIFICATION AIRPORT SURFACE DETECTION EQUIPMENT, MODEL X (ASDE-X)

Restrictions/Controls & Freight Information | NSN 5920-01-628-8358

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
No Freight Information