Product Details | CIRCUIT BREAKER

5925-01-156-4424 A device with means other than fuses for automatically opening the circuit in which it is installed when the current varies from the predetermined value for which the device is set. May include provisions for manual operation. At least one set of contacts must be in series with the actuating element(s). A combination of semiconductor and passive devices may be used in lieu of contacts. For automatically operated items in which the actuating (tripping) element and contacts are not in series, see RELAY (as modified). For items which are operated both manually and automatically but the actuating elements and contact are not in series, see RELAY-SWITCH. Excludes CIRCUIT BREAKER BOX and magneto "breaker" assemblies. See also SWITCH (as modified); and CONTROLLER.

Part Alternates: 122-135-023, 5925-01-156-4424, 01-156-4424, 5925011564424, 122135023, 011564424

Electrical and Electronic Equipment Components | Circuit Breakers

Supply Group (FSG) NSN Assign. NIIN
59 01-156-4424

Drawings & Photos | NSN 5925-01-156-4424


Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5925-01-156-4424

Technical Data | NSN 5925-01-156-4424

Characteristic Specifications
POLE QUANTITY 3
MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE 400.0 AMPERES AC ALL LOCATIONS
OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS 600.0 AC ALL LOCATIONS
FREQUENCY IN HERTZ 50.0 OR 60.0 ALL LOCATIONS
MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS 25000.0 AC ALL LOCATIONS
CIRCUIT PROTECTION TYPE OVERCURRENT ALL LOCATIONS
TRIP RELEASE METHOD THERMAL-MAGNETIC ALL LOCATIONS
TRIP RELEASE AMBIENT TEMP RATING 50.0 DEG CELSIUS NOMINAL ALL LOCATIONS
TRIP RELEASE CHARACTERISTIC TIME DELAY ALL LOCATIONS
TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT 0.125 NOMINAL AT 1000 PCT ALL LOCATIONS
ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT 150.0 ALL LOCATIONS
ULTIMATE TRIP TIME PER POLE IN SECONDS 1000.000 NOMINAL ALL LOCATIONS
RESET METHOD ELECTRIC
MAIN CONTACT TRIPPING MECHANISM TYPE TRIP FREE
RESET ACTUATOR VOLTAGE RATING AND TYPE IN VOLTS 120.0 AC
BODY STYLE 21B MULTIPOLE-SINGLE ACTUATOR TYPE
BODY LENGTH 10.125 INCHES NOMINAL
BODY WIDTH 8.250 INCHES NOMINAL
BODY HEIGHT 7.656 INCHES NOMINAL
CASE MATERIAL PLASTIC
MOUNTING FACILITY TYPE AND QUANTITY 4 UNTHREADED HOLE
UNTHREADED MOUNTING HOLE DIAMETER 0.312 INCHES NOMINAL
MANUAL ACTUATOR TYPE AND QUANTITY 1 PUSH-PULL
ACTUATOR FUNCTION TRIP-RESET
ACTUATOR POSITION DESIGNATION AT POLE TWO
TERMINAL TYPE AND QUANTITY 6 COMPRESSION
AUXILIARY SWITCH FUNCTION AND QUANTITY 2 CONTROL
SWITCH LOCATION AND POSITION DESIGNATION INTERNAL AT EACH POLE
SWITCH CONTACT ARRANGEMENT SINGLE POLE, DOUBLE THROW
SWITCH CURRENT RATING AND TYPE IN AMPS 6.0 AC
SWITCH VOLTAGE RATING AND TYPE IN VOLTS 250.0 AC
SWITCH TERMINAL TYPE WIRE LEAD

Restrictions/Controls & Freight Information | NSN 5925-01-156-4424

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Category Code Description
No Freight Information