Product Details | CIRCUIT BREAKER

5925-01-216-0285 A device with means other than fuses for automatically opening the circuit in which it is installed when the current varies from the predetermined value for which the device is set. May include provisions for manual operation. At least one set of contacts must be in series with the actuating element(s). A combination of semiconductor and passive devices may be used in lieu of contacts. For automatically operated items in which the actuating (tripping) element and contacts are not in series, see RELAY (as modified). For items which are operated both manually and automatically but the actuating elements and contact are not in series, see RELAY-SWITCH. Excludes CIRCUIT BREAKER BOX and magneto "breaker" assemblies. See also SWITCH (as modified); and CONTROLLER.

Part Alternates: AP411R51572, AP41-1R-5157-2, G6128342, G612834-2, 5925-01-216-0285, 01-216-0285, 5925012160285, 012160285

Electrical and Electronic Equipment Components | Circuit Breakers

Supply Group (FSG) NSN Assign. NIIN
59 05 SEP 1985 01-216-0285

Cross Reference | NSN 5925-01-216-0285

Part Number Cage Code Manufacturer
AP41-1R-5157-2 81541 SENSATA TECHNOLOGIES MARYLAND, INC
G612834-2 01714 LUCENT TECHNOLOGIES INC ADVANCED TECHNOLOGY SYSTEMS
G612834-2 64959 AMERICAN TELEPHONE AND TELEGRAPH CO
G612834-2 74193 EATON CORP HEINEMANN PRODUCTS

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5925-01-216-0285

Technical Data | NSN 5925-01-216-0285

Characteristic Specifications
TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT 0.700 MINIMUM AT 200 PCT AND 4.500 MAXIMUM AT 200 PCT FIRST LOCATION
SWITCH CURRENT RATING AND TYPE IN AMPS 1.0 AC AND 0.5 DC
STORAGE TYPE GENERAL PURPOSE WAREHOUSE
MOUNTING FACILITY TYPE AND QUANTITY 1 THREADED BUSHING W/PANEL SEAL
OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS 240.0 AC FIRST LOCATION
BUSHING LENGTH 0.390 INCHES MAXIMUM
INTERNAL TRIP RELEASE CONFIGURATION SERIES TRIP FIRST LOCATION
OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS 50.0 DC SECOND LOCATION
MAIN CONTACT TRIPPING MECHANISM TYPE TRIP FREE
THREAD SERIES DESIGNATOR UNEF
MOUNTING SURFACE TO TERMINAL END DISTANCE 1.780 INCHES MAXIMUM
THREAD QUANTITY PER INCH 32
TRIP RELEASE METHOD MAGNETIC ALL LOCATIONS
MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS 300.0 AC FIRST LOCATION
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH 0.885 INCHES MAXIMUM
SWITCH LOCATION AND POSITION DESIGNATION INTERNAL AT POLE TWO
MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS 500.0 DC SECOND LOCATION
TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT 0.100 MINIMUM AT 200 PCT AND 0.700 MAXIMUM AT 200 PCT SECOND LOCATION
SWITCH CONTACT ARRANGEMENT SINGLE POLE, DOUBLE THROW
POLE QUANTITY 2
ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT 115.0 ALL LOCATIONS
CASE MATERIAL METAL
TRIP RELEASE CHARACTERISTIC TIME DELAY ALL LOCATIONS
BODY LENGTH 1.562 INCHES MAXIMUM
CIRCUIT PROTECTION TYPE OVERCURRENT ALL LOCATIONS
ACTUATOR FUNCTION TRIP-RESET
MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE 16.0 AMPERES AC FIRST LOCATION
SWITCH TERMINAL TYPE TAB, SOLDER LUG
RESET METHOD MANUAL
TERMINAL TYPE AND QUANTITY 4 WIRE HOOK AND 2 TAB, SOLDER LUG
SWITCH VOLTAGE RATING AND TYPE IN VOLTS 125.0 AC AND 50.0 DC
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO WIDTH 0.625 INCHES NOMINAL
MANUAL ACTUATOR TYPE AND QUANTITY 1 TOGGLE
AUXILIARY SWITCH FUNCTION AND QUANTITY 1 ALARM
BODY STYLE MULTIPOLE-SINGLE ACTUATOR TYPE
NOMINAL THREAD SIZE 0.375 INCHES
INTERNAL TRIP RELEASE CONFIGURATION RELAY TRIP SECOND LOCATION
FREQUENCY IN HERTZ 60.0 FIRST LOCATION
MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE 4.0 AMPERES DC SECOND LOCATION
INCLOSURE PROTECTION TYPE FOR WHICH DESIGNED HERMETICALLY SEALED
BODY WIDTH 1.281 INCHES MAXIMUM
ACTUATOR POSITION DESIGNATION BETWEEN POLE ONE AND TWO

Restrictions/Controls & Freight Information | NSN 5925-01-216-0285

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
NMF Description 061300 CIRCUIT BREAKER/SWITCH NOI
Less than car load rating
Less than truck load rating P 77.5
Water commodity Code 658 unknown
Originating Activity Code TX Defense Supply Center Columbus
Columbus, OH 43218
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 5925-01-216-0285

Category Code Description
Cognizance Codes9BNavy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDNDepartment of the Navy
Service OrganizationNU.S. Navy
Acquisition Advice CodesJNOT STOCKED, CENTRALLY PROCURED # (NON-STOCKED ITEMS) IMM/Service centrally managed but not stocked item. Procurement will be initiated only after receipt of a requisition.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each