Product Details | CIRCUIT BREAKER

5925-01-230-6513 A device with means other than fuses for automatically opening the circuit in which it is installed when the current varies from the predetermined value for which the device is set. May include provisions for manual operation. At least one set of contacts must be in series with the actuating element(s). A combination of semiconductor and passive devices may be used in lieu of contacts. For automatically operated items in which the actuating (tripping) element and contacts are not in series, see RELAY (as modified). For items which are operated both manually and automatically but the actuating elements and contact are not in series, see RELAY-SWITCH. Excludes CIRCUIT BREAKER BOX and magneto "breaker" assemblies. See also SWITCH (as modified); and CONTROLLER.

Part Alternates: AP121R306219, AP12-1R-3062-19, 3179574-19, 31795740019, 3179574-0019, 5925-01-230-6513, 01-230-6513, 5925012306513, 012306513, 317957419

Electrical and Electronic Equipment Components | Circuit Breakers

Supply Group (FSG) NSN Assign. NIIN
59 16 APR 1986 01-230-6513

Cross Reference | NSN 5925-01-230-6513

Part Number Cage Code Manufacturer
3179574-0019 53711 NAVAL SEA SYSTEMS COMMAND
3179574-19 10001 NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT
3179574-19 74193 EATON CORP HEINEMANN PRODUCTS
AP12-1R-3062-19 81541 SENSATA TECHNOLOGIES MARYLAND, INC

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5925-01-230-6513

Technical Data | NSN 5925-01-230-6513

Characteristic Specifications
STORAGE TYPE GENERAL PURPOSE WAREHOUSE
MOUNTING FACILITY TYPE AND QUANTITY 1 THREADED BUSHING W/PANEL SEAL
MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS 300.0 AC ALL LOCATIONS
TEST DATA DOCUMENT 10001-3179574 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
CASE MATERIAL PLASTIC
MAIN CONTACT TRIPPING MECHANISM TYPE TRIP FREE
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO WIDTH 0.687 INCHES NOMINAL
BODY WIDTH 1.937 INCHES MAXIMUM
THREAD SERIES DESIGNATOR UNEF
THREAD QUANTITY PER INCH 32
NONTURN DEVICE LOCATION AT 12 OCLOCK
SWITCH VOLTAGE RATING AND TYPE IN VOLTS 120.0 AC AND 50.0 DC
TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT 0.200 MINIMUM AT 200 PCT AND 6.000 MAXIMUM AT 200 PCT ALL LOCATIONS
BUSHING LENGTH 0.280 INCHES MINIMUM AND 0.380 INCHES MAXIMUM
TRIP RELEASE METHOD MAGNETIC ALL LOCATIONS
MOUNTING SURFACE TO TERMINAL END DISTANCE 1.828 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH 0.906 INCHES MAXIMUM
SWITCH TERMINAL TYPE PIN
SWITCH LOCATION AND POSITION DESIGNATION INTERNAL AT POLE TWO
TERMINAL TYPE AND QUANTITY 4 WIRE HOOK
SWITCH CONTACT ARRANGEMENT SINGLE POLE, DOUBLE THROW
INCLOSURE PROTECTION TYPE FOR WHICH DESIGNED FUNGUS RESISTANT AND VIBRATION RESISTANT AND MOISTURE RESISTANT AND SHOCK RESISTANT AND SALT SPRAY PROOF
POLE QUANTITY 2
ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT 115.0 ALL LOCATIONS
FRAGILITY FACTOR MODERATELY RUGGED
MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE 2.0 AMPERES AC ALL LOCATIONS
TRIP RELEASE CHARACTERISTIC TIME DELAY ALL LOCATIONS
BODY LENGTH 1.562 INCHES MAXIMUM
THREAD PITCH DIAMETERS +0.3503 TO 0.3537 INCHES
CIRCUIT PROTECTION TYPE OVERCURRENT ALL LOCATIONS
ACTUATOR FUNCTION TRIP-RESET
NONTURN DEVICE DIAMETER 0.180 INCHES MINIMUM AND 0.300 INCHES MAXIMUM
RESET METHOD MANUAL
MANUAL ACTUATOR TYPE AND QUANTITY 1 TOGGLE
AUXILIARY SWITCH FUNCTION AND QUANTITY 1 ALARM
SWITCH CURRENT RATING AND TYPE IN AMPS 0.5 AC AND 0.5 DC
BODY STYLE MULTIPOLE-SINGLE ACTUATOR TYPE
NOMINAL THREAD SIZE 0.375 INCHES
FREQUENCY IN HERTZ 400.0 ALL LOCATIONS
SPECIAL HANDLING FEATURE MAGNETIC
OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS 240.0 AC ALL LOCATIONS
INTERNAL TRIP RELEASE CONFIGURATION SERIES TRIP ALL LOCATIONS
ACTUATOR POSITION DESIGNATION BETWEEN POLE ONE AND TWO

Restrictions/Controls & Freight Information | NSN 5925-01-230-6513

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
NMF Description 061300 CIRCUIT BREAKER/SWITCH NOI
Less than car load rating
Less than truck load rating P 77.5
Water commodity Code 658 unknown
Originating Activity Code TX Defense Supply Center Columbus
Columbus, OH 43218
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 5925-01-230-6513

Category Code Description
Cognizance Codes9BNavy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDNDepartment of the Navy
Service OrganizationNU.S. Navy
Acquisition Advice CodesZINSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each