Product Details | PROXIMITY SWITCH

5930-01-120-1719 A switch designed to perform the function of opening and/or closing one or more electrical circuits. The switching function is accomplished by means of separable contacts, semiconductor devices, or a combination of separable contacts and semiconductor devices. The item functions in response to electrical changes in its internal circuit caused by capacitance, inductance, or magnetic flux changes. It is activated by permanent magnets, metallic materials, or nonmetallic materials which come within its sensing range. For sensing switches which respond to changes other than capacitance, inductance, or magnetic flux, see SWITCH, AIRFLOW; SWITCH, CENTRIFUGAL; SWITCH, INERTIA; SWITCH, PRESSURE; SWITCH, PRESSURE-THERMOSTATIC; SWITCH, THERMOSTATIC; and SWITCH, TILT.

Part Alternates: 113FW41R2, 113FW41-R2, 798E845, 5930-01-120-1719, 01-120-1719, 5930011201719, 011201719

Electrical and Electronic Equipment Components | Switches

Supply Group (FSG) NSN Assign. NIIN
59 12 OCT 1981 01-120-1719

Demand History | NSN 5930-01-120-1719

Part Number Request Date QTY Origin
113FW41-R2 2024-08-229 20 DIBBS
113FW41-R2 2024-08-227 20 DIBBS
113FW41-R2 2024-08-226 20 DIBBS
113FW41-R2 2024-08-225 20 DIBBS
113FW41-R2 2024-08-222 20 DIBBS
113FW41-R2 2024-08-221 20 DIBBS
113FW41-R2 2024-08-220 20 DIBBS
113FW41-R2 2024-08-219 20 DIBBS
113FW41-R2 2024-08-215 20 DIBBS
113FW41-R2 2024-07-185 20 DIBBS
113FW41-R2 2024-07-184 20 DIBBS
113FW41-R2 2024-06-180 20 DIBBS
113FW41-R2 2024-06-179 20 DIBBS
113FW41-R2 2024-06-178 20 DIBBS
113FW41-R2 2024-06-177 20 DIBBS
113FW41-R2 2024-06-176 20 DIBBS
113FW41-R2 2024-06-159 20 DIBBS
113FW41-R2 2024-06-156 20 DIBBS
113FW41-R2 2024-05-144 20 DIBBS
113FW41-R2 2024-02-51 10 DIBBS
113FW41-R2 2024-02-39 10 DIBBS
5930-01-120-1719 2018-03-63 46 DIBBS
5930-01-120-1719 2018-02-46 1 DIBBS-RFPs
5930-01-120-1719 2018-01-04 18 DIBBS
5930-01-120-1719 2017-11-306 27 DIBBS
5930-01-120-1719 2017-09-247 12 DIBBS
5930-01-120-1719 2017-06-155 28 DIBBS
5930-01-120-1719 2017-05-135 13 DIBBS
5930-01-120-1719 2017-04-117 12 DIBBS
5930-01-120-1719 2016-11-326 11 DIBBS
5930-01-120-1719 2014-04-100 34 DIBBS
5930-01-120-1719 2013-08-240 20 DIBBS
5930-01-120-1719 2013-08-223 18 DIBBS
5930-01-120-1719 2013-07-205 14 DIBBS
5930-01-120-1719 2013-07-204 14 DIBBS
5930-01-120-1719 2012-11-307 27 DIBBS
5930-01-120-1719 2012-10-292 18 DIBBS
5930-01-120-1719 2012-09-265 1 DIBBS
5930-01-120-1719 2012-09-249 1 DIBBS
5930-01-120-1719 2012-08-233 6 DIBBS
5930-01-120-1719 2012-08-215 8 DIBBS
5930-01-120-1719 2012-07-202 2 DIBBS
5930-01-120-1719 2012-07-188 1 DIBBS
5930-01-120-1719 2012-07-187 9 DIBBS
5930-01-120-1719 2012-06-171 2 DIBBS
5930-01-120-1719 2012-06-163 6 DIBBS
5930-01-120-1719 2012-06-156 8 DIBBS
5930-01-120-1719 2012-04-115 2 DIBBS
5930-01-120-1719 2012-04-96 8 DIBBS
5930-01-120-1719 2012-03-66 7 DIBBS
5930-01-120-1719 2012-02-52 7 DIBBS
5930-01-120-1719 2012-02-38 10 DIBBS
5930-01-120-1719 2011-12-353 5 DIBBS
5930-01-120-1719 2011-07-186 6 DIBBS
5930-01-120-1719 2011-04-91 7 DIBBS
5930-01-120-1719 2011-03-67 4 DIBBS
5930-01-120-1719 2010-12-355 4 DIBBS
5930-01-120-1719 2010-10-301 5 DIBBS
5930-01-120-1719 2010-07-204 5 DIBBS
5930-01-120-1719 2010-05-124 3 DIBBS
5930-01-120-1719 2010-01-06 2 United Arab Emirates
5930-01-120-1719 2007-12-338 25 DIBBS
5930-01-120-1719 2007-10-278 16 DIBBS
5930-01-120-1719 2007-07-190 4 DIBBS
5930-01-120-1719 2007-06-171 4 DIBBS
5930-01-120-1719 2007-06-164 9 DIBBS
5930-01-120-1719 2007-06-164 1 DIBBS
5930-01-120-1719 2007-05-129 3 DIBBS
5930-01-120-1719 2007-04-96 1 DIBBS
5930-01-120-1719 2007-02-58 1 DIBBS
5930-01-120-1719 2007-01-30 9 DIBBS

Cross Reference | NSN 5930-01-120-1719

Part Number Cage Code Manufacturer
113FW41-R2 91929 HONEYWELL INTERNATIONAL INC. DBA HONEYWELL
798E845 05606 GENERAL DYNAMICS-OTS, INC. DBA GD-OTS (WILLISTON)

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5930-01-120-1719

Technical Data | NSN 5930-01-120-1719

Characteristic Specifications
III END ITEM IDENTIFICATION GPU-5/A 30MM GUN POD

Restrictions/Controls & Freight Information | NSN 5930-01-120-1719

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:BMunitions List Item - Mutilation (MUT) to the point of scrap required. (Formerly: Demilitarization not required. Trade Security Controls (TSCs) required at disposition.)
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 061300 CIRCUIT BREAKER/SWITCH NOI
Less than car load rating
Less than truck load rating P 77.5
Water commodity Code 72D unknown
Originating Activity Code TG Warner-Robins Air Logistics Center
Robins AFB, GA 31098-5609
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 5930-01-120-1719

Category Code Description
Budget Code9 General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.
Materiel Management Aggregation CodeGGTG:GUNNERY EQUIPMENT
Price ValidationN The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
  • The price has not been analyzed or reviewed for accuracy.
  • ZOP or Standard price challenges are permissible, but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ?L? or?F?,the case must be evaluated locally where purchased or fabricated.
Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDFDepartment of the Air Force
Service OrganizationFU.S. Air Force
ReparabilityNStock Fund (except Munitions)
Acquisition Advice CodesDDoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each
Category Code Description
Cognizance Codes9BNavy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDNDepartment of the Navy
Service OrganizationNU.S. Navy
Acquisition Advice CodesDDoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each