Product Details | CODE INDICATING WHEEL SWITCH

5930-01-368-8879 A switch which is externally actuated by a thumbwheel and/or pushbutton. A legend or message is visually displayed at each position of the indicating wheel which corresponds to electrically coded output. Electrically coded output is achieved by rotating a set of brush contacts permanently attached to the code indicating wheel, against a stationary commutator which is usually a printed wiring board having electrical pads or contacts which are interconnected by the rotating brush contacts. May have additional electrical components (such as resistors, capacitors, diodes) premounted on that portion of printed wiring board which extends beyond the back of switch housing.

Part Alternates: 07S0518, 07-S-0518, 1208860, 6122659, 7S518, 7-S-518, 5930-01-368-8879, 01-368-8879, 5930013688879, 013688879

Electrical and Electronic Equipment Components | Switches

Supply Group (FSG) NSN Assign. NIIN
59 11 DEC 1992 01-368-8879

Drawings & Photos | NSN 5930-01-368-8879


Cross Reference | NSN 5930-01-368-8879

Part Number Cage Code Manufacturer
07-S-0518 07126 ELECTRO SWITCH CORP. DBA DIGITRAN
1208860 02769 LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN
1208860 56232 LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN
6122659 53711 NAVAL SEA SYSTEMS COMMAND
7-S-518 07126 ELECTRO SWITCH CORP. DBA DIGITRAN

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5930-01-368-8879

Technical Data | NSN 5930-01-368-8879

Characteristic Specifications
STYLE DESIGNATOR 30 RECTANGULAR INLINE INDICATING
OVERALL LENGTH 1.930 INCHES NOMINAL
OVERALL HEIGHT 1.330 INCHES NOMINAL
OVERALL WIDTH 0.960 INCHES NOMINAL
INDIVIDUAL SECTION QUANTITY 2
POLE QUANTITY 1 EACH SECTION FRONT
THROW QUANTITY 10 EACH SECTION FRONT
READOUT INDICATOR MARKING 0,1,2,3,4,5,6,7,8,9 EACH SECTION
CONTACT VOLTAGE RATING IN VOLTS 28.0 AC AT SEA LEVEL
CONTACT LOAD CURRENT RATING 125.0 MILLIAMPERES RESISTIVE LOAD AC AT SEA LEVEL
ACTUATOR TYPE THUMBWHEEL ALL ACTUATORS
SWITCH ACTUATOR INDEXING POSITION QUANTITY 10 ALL ACTUATORS
TERMINAL TYPE PIN
MOUNTING METHOD UNTHREADED HOLE SINGLE MOUNTING FACILITY
UNTHREADED MOUNTING HOLE DIAMETER 0.120 INCHES NOMINAL SINGLE MOUNTING FACILITY

Restrictions/Controls & Freight Information | NSN 5930-01-368-8879

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
NMF Description 061300 CIRCUIT BREAKER/SWITCH NOI
Less than car load rating
Less than truck load rating P 77.5
Water commodity Code 658 unknown
Originating Activity Code TX Defense Supply Center Columbus
Columbus, OH 43218
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 5930-01-368-8879

Category Code Description
Cognizance Codes9BNavy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDNDepartment of the Navy
Service OrganizationNU.S. Navy
Acquisition Advice CodesZINSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each