Product Details | CODE INDICATING WHEEL SWITCH

5930-01-371-8813 A switch which is externally actuated by a thumbwheel and/or pushbutton. A legend or message is visually displayed at each position of the indicating wheel which corresponds to electrically coded output. Electrically coded output is achieved by rotating a set of brush contacts permanently attached to the code indicating wheel, against a stationary commutator which is usually a printed wiring board having electrical pads or contacts which are interconnected by the rotating brush contacts. May have additional electrical components (such as resistors, capacitors, diodes) premounted on that portion of printed wiring board which extends beyond the back of switch housing.

Part Alternates: 12H0066, 12-H-0066, 50002342, 5930-01-371-8813, 01-371-8813, 5930013718813, 013718813

Electrical and Electronic Equipment Components | Switches

Supply Group (FSG) NSN Assign. NIIN
59 01-371-8813

Drawings & Photos | NSN 5930-01-371-8813


Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5930-01-371-8813

Technical Data | NSN 5930-01-371-8813

Characteristic Specifications
STYLE DESIGNATOR 29 RECTANGULAR INDICATING
OVERALL LENGTH 0.480 INCHES NOMINAL
OVERALL HEIGHT 2.075 INCHES NOMINAL
OVERALL WIDTH 1.150 INCHES NOMINAL
INDIVIDUAL SECTION QUANTITY 1
READOUT INDICATOR MARKING 0,1,2,3,4,5,6,7, SINGLE SECTION
COLOR BLACK SINGLE BODY BLACK SINGLE INDICATOR BACKGROUND WHITE SINGLE INDICATOR MARKING RED SINGLE LAMP
CONTACT VOLTAGE RATING IN VOLTS 200.0 AC AT SEA LEVEL 200.0 DC AT SEA LEVEL
ACTUATOR TYPE PUSH BUTTON SINGLE ACTUATOR
SWITCH ACTUATOR INDEXING POSITION QUANTITY 8 SINGLE ACTUATOR
TERMINAL TYPE PRINTED CIRCUIT
MOUNTING METHOD THREADED HOLE SINGLE MOUNTING FACILITY
THREAD SERIES DESIGNATOR UNC SINGLE MOUNTING FACILITY
NOMINAL THREAD SIZE 0.086 INCHES SINGLE MOUNTING FACILITY
THREAD CLASS 2B SINGLE MOUNTING FACILITY
THREAD QUANTITY PER INCH 56 SINGLE MOUNTING FACILITY
MOUNTING FACILITY PATTERN TWO POSITION IN-LINE SINGLE MOUNTING FACILITY
DISTANCE BETWEEN MOUNTING FACILITY CENTERS 1.385 INCHES NOMINAL SINGLE MOUNTING FACILITY

Restrictions/Controls & Freight Information | NSN 5930-01-371-8813

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Category Code Description
No Freight Information