Product Details | ELECTRICAL RECEPTACLE CONNECTOR

5935-00-563-1173 An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.

Part Alternates: MS21097114S, MS21097-114S, M21097/1-145, M21097/21-145, M21097/21A-145, M210971145, M2109721145, M2109721A145, A122A2A, HB22S0, HBD22S0, MIL-C-21097/21A, MILC210971, MILC21097-1, MILC2109721A, 600110700GDU2, 600-110-700GDU2, 210017-145, 22522251101, 225-22251-101, 2502230220, 250-22-30-220, 48000226000, 48000226-000, 5022A20, 50-22A20 , 5022A20M, 50-22A20M, 5935-00-563-1173, 00-563-1173, 5935005631173, 210017145, 005631173

Electrical and Electronic Equipment Components | Connectors, Electrical

Supply Group (FSG) NSN Assign. NIIN
59 17 NOV 1974 00-563-1173

Drawings & Photos | NSN 5935-00-563-1173


Demand History | NSN 5935-00-563-1173

Part Number Request Date QTY Origin
5935-00-563-1173 2023-04-114 51 DIBBS
5935-00-563-1173 2023-04-96 51 DIBBS
5935-00-563-1173 2022-11-333 52 DIBBS
5935-00-563-1173 2022-06-174 36 DIBBS
5935-00-563-1173 2022-03-79 11 DIBBS
5935-00-563-1173 2021-11-319 7 DIBBS
5935-00-563-1173 2021-10-304 88 DIBBS
5935-00-563-1173 2016-03-70 7 DIBBS
5935-00-563-1173 2015-12-349 9 DIBBS
5935-00-563-1173 2015-04-119 9 DIBBS
5935-00-563-1173 2015-04-91 9 DIBBS
5935-00-563-1173 2015-03-89 11 DIBBS
5935-00-563-1173 2014-07-197 12 DIBBS
5935-00-563-1173 2007-10-302 100 DIBBS

Cross Reference | NSN 5935-00-563-1173

Part Number Cage Code Manufacturer
210017-145 25512 NORTHROP GRUMMAN SYSTEMS CORPORATION DBA DENRO SYSTEMS
225-22251-101 02660 AMPHENOL CORP SPECTRA-STRIP/ITD
250-22-30-220 71785 CINCH CONNECTORS, INC.
48000226-000 71785 CINCH CONNECTORS, INC.
50-22A20 71785 CINCH CONNECTORS, INC.
50-22A20 97896 HONEYWELL INTERNATIONAL INC. DBA HONEYWELL
50-22A20M 71785 CINCH CONNECTORS, INC.
600-110-700GDU2 95238 WINCHESTER ELECTRONICS CORPORATION DBA WINCHESTER ELECTRONICS
A122A2A 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
HB22S0 81312 WINCHESTER ELECTRONICS CORPORATION
HBD22S0 81312 WINCHESTER ELECTRONICS CORPORATION
M21097/1-145 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
M21097/21-145 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
M21097/21A-145 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
MIL-C-21097/21A 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
MILC21097-1 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
MS21097-114S 96906 MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5935-00-563-1173

Technical Data | NSN 5935-00-563-1173

Characteristic Specifications
BODY STYLE 4Q STRAIGHT EDGE TYPE W/MOUNTING FLANGE
OVERALL LENGTH 4.360 INCHES MAXIMUM
OVERALL HEIGHT 0.755 INCHES NOMINAL
OVERALL WIDTH 0.333 INCHES MINIMUM AND 0.353 INCHES MAXIMUM
DISTANCE BETWEEN MOUNTING FACILITY CENTERS 4.032 INCHES MINIMUM AND 4.040 INCHES MAXIMUM
BOARD ACCOMMODATED WIDTH 0.054 INCHES MINIMUM AND 0.070 INCHES MAXIMUM
BOARD ACCOMMODATED LENGTH 3.588 INCHES MINIMUM AND 3.604 INCHES MAXIMUM SINGLE BOARD
UNTHREADED MOUNTING HOLE DIAMETER 0.125 INCHES MINIMUM AND 0.131 INCHES MAXIMUM
MATING END QUANTITY 1
CONTACT POSITION ARRANGEMENT STYLE AAAB 1 ROW OF CONTACTS INSERTED BOARD SINGLE MATING END
INCLUDED CONTACT QUANTITY 22 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT REMOVABILITY NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPE BIFURCATED SPRING SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MAXIMUM CURRENT RATING IN AMPS 5.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT GOLD SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION MIL-G-45204,TY 2,CL 1 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPE TAB, SOLDER LUG SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL LOCATION BACK SINGLE MATING END SINGLE CONTACT GROUPING
ENVIRONMENTAL PROTECTION MOISTURE PROOF AND SALT WATER RESISTANT AND VIBRATION PROOF
TEST DATA DOCUMENT 81349-MIL-C-21097 SPECIFICATION
SPECIFICATION/STANDARD DATA 81349-MIL-C-21097/21A GOVERNMENT SPECIFICATION
III PRECIOUS MATERIAL GOLD
III PRECIOUS MATERIAL AND WEIGHT 0.022 GOLD GRAINS, TROY
III PRECIOUS MATERIAL AND LOCATION CONTACT SURFACES GOLD
MANUFACTURERS CODE 81349
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE MIL-C-21097/21A
MANUFACTURERS CODE 81349
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE M21097/21-145

Restrictions/Controls & Freight Information | NSN 5935-00-563-1173

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Electro-static Discharge Susceptible:ANo known Electrostatic Discharge (ESD) or Electromagnetic Interference (EMI) sensitivity
Precious Metals Indicator Code:GItem contains gold
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 061680 ELEC WIRING PLUGS ETC
Less than car load rating
Less than truck load rating W Rating Variable
Water commodity Code 72D unknown
Originating Activity Code TX Defense Supply Center Columbus
Columbus, OH 43218
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 5935-00-563-1173

Category Code Description
Materiel Category and Inventory ManagerQ Electronics Materiel (DLA/GSA Items)
Appropriation and Budget Activity2 Stock Fund Secondary Items
Management Inventory Segment2 NONREPARABLE ITEMS (Exclusive of Insurance and Provisioning Items). This code will be used to identify items which are not reparable.
Specific Group/Generic CodeS Surveillance Target Acquisition and Night Observation (STANO)
Weapons Systems/End Item or Homogeneous GroupSMAN/UPD-7
Accounting Requirements CodeX Expendable item. An item of Army property coded with an ARC of ?X? in the AMDF. Expendable items require no formal accountability after issue from a stock record account. Commercial and fabricated items similar to items coded ?X? in the AMDF are considered expendable items.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDADepartment of the Army
Service OrganizationAU.S. Army
ReparabilityAItem requires special handling or condemnation procedures for specific reasons, such as precious metal content, high dollar value, critical material, or hazardous materiel. Refer to appropriate manuals or directives for specific instructions.
Acquisition Advice CodesZINSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each
Category Code Description
Budget Code9 General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.
Materiel Management Aggregation CodeEHSX:ELECTRONIC COMPONENTS
Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.
Price ValidationV The current standard price has been validated.
  • The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.
  • The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.
  • ZOP or Standard price challenges are permissible but must be supported by adequate justification.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDFDepartment of the Air Force
Service OrganizationFU.S. Air Force
ReparabilityNStock Fund (except Munitions)
Acquisition Advice CodesZINSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each
Category Code Description
Stores Account Code1Marine Corps Stock Fund Account Item.
Combat Essentiality Code5Critical Repair Part to a Combat Essential End Item. Those parts or components whose failure in a combat essential end item will render the end item inoperative or reduce its effectiveness below the minimum acceptable level of efficiency.
Materiel Management CodeBAll CommoditiesDefense Logistics Agency, (DLA,)
Echelon Management Code2ICP/DSSC Marine Corps-managed Recoverability Code D items and Defense Logistics Agency (DLA)/TACOM/GSA) items which the integrated manager has not decontrolled.
Echelon Identification CodeBConsumable Repair Parts
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDMU.S. Marine Corps
Service OrganizationMU.S. Marine Corps
ReparabilityZNonreparable item. When unserviceable, condemn and dispose at the level indicated by the first digit of the maintenance code.
Acquisition Advice CodesVTERMINAL ITEM # Identifies items in stock, but future procurement is not authorized. Requisitions may continue to be submitted until stocks are exhausted. Preferred item National Stock Number is normally provided by application of the phrase: When Exhausted Use (NSN). Requisitions will be submitted in accordance with IMM/Service requisitioning procedures as applicable.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each
Category Code Description
Cognizance Codes9BNavy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Special Material Content9 Non-Hazardous or Non-Sensitive Item, does not require hazardous or special handling, packaging or precautions
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDNDepartment of the Navy
Service OrganizationNU.S. Navy
Acquisition Advice CodesZINSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each