Product Details | ELECTRICAL RECEPTACLE CONNECTOR

5935-00-599-7902 An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.

Part Alternates: M39012/03-0012, M39012/03-002, M39012030012, M3901203002, MILC3901203, MILC39012-03, UG160A, UG-160A, UG160DU, 824364, 82-4364, 5935-00-599-7902, 00-599-7902, 5935005997902, 005997902

Electrical and Electronic Equipment Components | Connectors, Electrical

Supply Group (FSG) NSN Assign. NIIN
59 16 JAN 1975 00-599-7902

Drawings & Photos | NSN 5935-00-599-7902


Demand History | NSN 5935-00-599-7902

Part Number Request Date QTY Origin
5935-00-599-7902 2025-09-258 167 DIBBS
5935-00-599-7902 2025-09-247 167 DIBBS
5935-00-599-7902 2023-08-214 10 DIBBS
5935-00-599-7902 2023-07-201 10 DIBBS
5935-00-599-7902 2023-06-172 35 DIBBS
5935-00-599-7902 2023-06-159 35 DIBBS
5935-00-599-7902 2022-11-329 185 DIBBS
5935-00-599-7902 2022-11-317 185 DIBBS
5935-00-599-7902 2022-05-132 9 DIBBS
5935-00-599-7902 2022-02-54 33 DIBBS
5935-00-599-7902 2022-02-53 33 DIBBS
5935-00-599-7902 2021-12-350 31 DIBBS
5935-00-599-7902 2021-10-279 72 DIBBS
5935-00-599-7902 2021-09-264 72 DIBBS
5935-00-599-7902 2020-10-283 6 PK
5935-00-599-7902 2020-10-282 148 DIBBS
5935-00-599-7902 2020-09-274 89 DIBBS
UG160DU 2020-09-257 3 PK
5935-00-599-7902 2020-09-257 22 DIBBS
5935-00-599-7902 2020-09-256 3 PK
UG160DU 2020-09-252 3 UK
5935-00-599-7902 2020-02-56 71 DIBBS
5935-00-599-7902 2020-02-37 71 DIBBS
5935-00-599-7902 2020-01-21 54 DIBBS
5935-00-599-7902 2020-01-07 54 DIBBS
UG160DU 2019-08-240 6 PK
5935-00-599-7902 2019-06-169 23 DIBBS
5935-00-599-7902 2019-06-161 1 DIBBS-RFPs
5935-00-599-7902 2019-05-139 35 DIBBS
5935-00-599-7902 2019-05-122 19 DIBBS
5935-00-599-7902 2019-04-93 4 United States
5935-00-599-7902 2018-10-277 67 DIBBS
M39012030012 2016-07-209 8 us
M39012/03-0012 2016-07-207 8
5935-00-599-7902 2015-01-20 93 DIBBS
5935-00-599-7902 2014-12-338 94 DIBBS
5935-00-599-7902 2014-08-218 86 DIBBS
5935-00-599-7902 2014-08-216 86 DIBBS
M39012030012 2011-08-213 2 AE
M39012030012 2011-07-199 2 AE
5935-00-599-7902 2009-09-244 159 DIBBS
5935-00-599-7902 2009-01-06 565 DIBBS
5935-00-599-7902 2007-04-102 265 DIBBS
5935-00-599-7902 2006-07-201 104 DIBBS

Cross Reference | NSN 5935-00-599-7902

Part Number Cage Code Manufacturer
82-4364 74868 AMPHENOL CORPORATION
M39012/03-0012 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
M39012/03-002 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
MILC39012-03 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
UG-160A 80058 JOINT ELECTRONICS TYPE DESIGNATION SYSTEM
UG160DU 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5935-00-599-7902

Technical Data | NSN 5935-00-599-7902

Characteristic Specifications
BODY STYLE 13L STRAIGHT SHAPE, EXTERNAL COUPLING
OVERALL LENGTH 2.031 INCHES MAXIMUM
OVERALL DIAMETER 0.850 INCHES MINIMUM AND 0.900 INCHES MAXIMUM
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE 0.912 INCHES MINIMUM AND 0.940 INCHES MAXIMUM
MOUNTING FACILITY THICKNESS 0.250 INCHES MAXIMUM
BUSHING ACCOMMODATION HOLE SHAPE ROUND W/DOUBLE FLAT
CONNECTOR LOCKING METHOD EXTERNALLY THREADED SHELL
THREADED DEVICE TYPE COUPLING FACILITY AND MOUNTING BUSHING
THREAD SERIES DESIGNATOR UNEF AND UNEF
NOMINAL THREAD SIZE 0.625 INCHES AND 0.625 INCHES
THREAD CLASS 2A AND 2A
THREAD DIRECTION RIGHT-HAND AND RIGHT-HAND
CONNECTOR CABLE STRAIN RELIEF METHOD CRIMP TYPE
SHELL TYPE SOLID
SHELL MATERIAL ALUMINUM ALLOY
MATING END QUANTITY 1
CONTACT POSITION ARRANGEMENT STYLE ABCE N SINGLE MATING END
INCLUDED CONTACT QUANTITY 1 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT REMOVABILITY NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPE COAXIAL SOCKET SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS 1000.0 SINGLE MATING END SINGLE CONTACT GROUPING
RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS 50.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MAXIMUM FREQUENCY RATING 11000.0 MEGAHERTZ SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT GOLD SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION MIL-G-45204,TY 2,CL 2 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPE SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL LOCATION BACK SINGLE MATING END SINGLE CONTACT GROUPING
ENVIRONMENTAL PROTECTION MOISTURE RESISTANT AND SALT WATER RESISTANT AND VIBRATION RESISTANT
TEST DATA DOCUMENT 81349-MIL-C-39012 SPECIFICATION
SPECIFICATION/STANDARD DATA 81349-MIL-C-39012 GOVERNMENT SPECIFICATION
III PRECIOUS MATERIAL GOLD
III PRECIOUS MATERIAL AND WEIGHT 0.005 GOLD GRAINS, TROY
III PRECIOUS MATERIAL AND LOCATION CONTACT SURFACES GOLD
MANUFACTURERS CODE 81349
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE MILC39012-03

Restrictions/Controls & Freight Information | NSN 5935-00-599-7902

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Electro-static Discharge Susceptible:ANo known Electrostatic Discharge (ESD) or Electromagnetic Interference (EMI) sensitivity
Precious Metals Indicator Code:GItem contains gold
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 061680 ELEC WIRING PLUGS ETC
Less than car load rating
Less than truck load rating W Rating Variable
Water commodity Code 658 unknown
Originating Activity Code TX Defense Supply Center Columbus
Columbus, OH 43218
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 5935-00-599-7902

Category Code Description
Materiel Category and Inventory ManagerQ Electronics Materiel (DLA/GSA Items)
Appropriation and Budget Activity2 Stock Fund Secondary Items
Management Inventory Segment2 NONREPARABLE ITEMS (Exclusive of Insurance and Provisioning Items). This code will be used to identify items which are not reparable.
Specific Group/Generic Code4 Communications Systems Agency and Satellite Communications
Weapons Systems/End Item or Homogeneous Group4AAN/FSC-78/GSC-39
Accounting Requirements CodeX Expendable item. An item of Army property coded with an ARC of ?X? in the AMDF. Expendable items require no formal accountability after issue from a stock record account. Commercial and fabricated items similar to items coded ?X? in the AMDF are considered expendable items.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDADepartment of the Army
Service OrganizationAU.S. Army
ReparabilityAItem requires special handling or condemnation procedures for specific reasons, such as precious metal content, high dollar value, critical material, or hazardous materiel. Refer to appropriate manuals or directives for specific instructions.
Acquisition Advice CodesDDoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each
Category Code Description
Budget Code9 General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.
Materiel Management Aggregation CodeEHSX:ELECTRONIC COMPONENTS
Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.
Price ValidationV The current standard price has been validated.
  • The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.
  • The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.
  • ZOP or Standard price challenges are permissible but must be supported by adequate justification.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDFDepartment of the Air Force
Service OrganizationFU.S. Air Force
ReparabilityNStock Fund (except Munitions)
Acquisition Advice CodesDDoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each
Category Code Description
Stores Account Code1Marine Corps Stock Fund Account Item.
Combat Essentiality Code5Critical Repair Part to a Combat Essential End Item. Those parts or components whose failure in a combat essential end item will render the end item inoperative or reduce its effectiveness below the minimum acceptable level of efficiency.
Materiel Management CodeBAll CommoditiesDefense Logistics Agency, (DLA,)
Echelon Management Code2ICP/DSSC Marine Corps-managed Recoverability Code D items and Defense Logistics Agency (DLA)/TACOM/GSA) items which the integrated manager has not decontrolled.
Echelon Identification CodeBConsumable Repair Parts
Physical Category Code1Bin
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDMU.S. Marine Corps
Service OrganizationMU.S. Marine Corps
ReparabilityZNonreparable item. When unserviceable, condemn and dispose at the level indicated by the first digit of the maintenance code.
Acquisition Advice CodesDDoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each
Category Code Description
Cognizance Codes9BNavy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Special Material Content9 Non-Hazardous or Non-Sensitive Item, does not require hazardous or special handling, packaging or precautions
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDNDepartment of the Navy
Service OrganizationNU.S. Navy
Acquisition Advice CodesDDoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each