Product Details | ELECTRICAL PLUG CONNECTOR

5935-01-014-1444 An electrical fitting with electrical contacts, constructed to be affixed to the end of a cable, conduit, coaxial line, cord or wiring for convenience in joining with other electrical connector(s) or PRINTED WIRING BOARD and is not designed to be mounted on a bulkhead, chasses, panel, PRINTED WIRING BOARD, or the like. Excludes JACK, TELEPHONE; JACK, TIP; PLUG, TELEPHONE; PLUG TIP; INSERT, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified); and SOCKET, PLUG-IN, ELECTRONIC COMPONENTS. See also LEAD ASSEMBLY, ELECTRICAL; WIRING HARNESS (as modified); and CABLE ASSEMBLY (as modified). For items without inserts, see SHELL, ELECTRICAL CONNECTOR.

Part Alternates: M39012/55-4019, M39012/55-4026, M39012554019, M39012554026, MIL-C-39012/55, MILC3901255, 9699, 9902572, 990257-2, 10135506 , 2031500902, 2031-5009-02, 313952, 31395-2, 50624014989, 50-624-0149-89, 5935-01-014-1444, 01-014-1444, 5935010141444, 010141444

Electrical and Electronic Equipment Components | Connectors, Electrical

Supply Group (FSG) NSN Assign. NIIN
59 16 DEC 1975 01-014-1444

Drawings & Photos | NSN 5935-01-014-1444


Demand History | NSN 5935-01-014-1444

Part Number Request Date QTY Origin
5935-01-014-1444 2025-09-268 210 DIBBS
5935-01-014-1444 2025-09-253 210 DIBBS
5935-01-014-1444 2019-03-63 1301 DIBBS
5935-01-014-1444 2019-02-52 1301 DIBBS
5935-01-014-1444 2018-11-333 237 DIBBS
5935-01-014-1444 2018-10-287 2083 DIBBS
5935-01-014-1444 2018-09-256 274 DIBBS
5935-01-014-1444 2018-08-235 1748 DIBBS
5935-01-014-1444 2018-01-08 694 DIBBS
5935-01-014-1444 2017-12-362 694 DIBBS
5935-01-014-1444 2017-12-337 111 DIBBS
5935-01-014-1444 2017-10-299 535 DIBBS
5935-01-014-1444 2017-06-180 315 DIBBS
5935-01-014-1444 2017-03-61 318 DIBBS
5935-01-014-1444 2013-10-289 315 DIBBS
5935-01-014-1444 2013-08-225 1 DIBBS-RFPs
5935-01-014-1444 2013-03-78 364 DIBBS
5935-01-014-1444 2012-12-360 172 DIBBS
5935-01-014-1444 2012-06-181 180 DIBBS
5935-01-014-1444 2012-02-39 38 DIBBS
5935-01-014-1444 2011-12-341 111 DIBBS
5935-01-014-1444 2011-12-341 296 DIBBS
5935-01-014-1444 2011-11-321 296 DIBBS
5935-01-014-1444 2011-10-299 111 DIBBS
9902572 2011-01-11 28 US
M39012554026 2011-01-11 28 US
5935-01-014-1444 2009-10-292 862 DIBBS
5935-01-014-1444 2008-09-253 315 DIBBS
5935-01-014-1444 2008-06-156 134 DIBBS
5935-01-014-1444 2008-05-127 100 DIBBS
5935-01-014-1444 2008-02-52 287 DIBBS
5935-01-014-1444 2008-01-31 429 DIBBS
5935-01-014-1444 2007-11-320 30 DIBBS
5935-01-014-1444 2007-10-289 331 US
5935-01-014-1444 2007-10-284 466 DIBBS
5935-01-014-1444 2007-10-282 350 DIBBS
M39012554026 2007-10-277 331 US
5935-01-014-1444 2007-09-267 331 DIBBS
5935-01-014-1444 2007-09-261 262 DIBBS
5935-01-014-1444 2007-08-235 167 DIBBS
5935-01-014-1444 2007-05-127 247 DIBBS
5935-01-014-1444 2007-03-71 175 DIBBS
5935-01-014-1444 2007-02-52 209 DIBBS
5935-01-014-1444 2006-04-110 366 DIBBS

Cross Reference | NSN 5935-01-014-1444

Part Number Cage Code Manufacturer
2031-5009-02 26805 TYCO ELECTRONICS CORP
31395-2 60674 MICROWAVE DEVICES INC
50-624-0149-89 98291 ITT CANNON RF PRODUCTS
9699 71468 ITT CORPORATION DBA I T T CANNON
990257-2 00752 EDO CORPORATION DIV EDO CORPORATION AP&T
M39012/55-4019 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
M39012/55-4026 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
MIL-C-39012/55 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5935-01-014-1444

Technical Data | NSN 5935-01-014-1444

Characteristic Specifications
BODY STYLE 5D STRAIGHT SHAPE, INTERNAL COUPLING
OVERALL LENGTH 1.250 INCHES MAXIMUM
OVERALL DIAMETER 0.400 INCHES MAXIMUM
CONNECTOR LOCKING METHOD INTERNALLY THREADED COUPLING NUT
THREADED DEVICE TYPE COUPLING FACILITY
THREAD SERIES DESIGNATOR UNS
NOMINAL THREAD SIZE 0.250 INCHES
THREAD CLASS 2B
THREAD QUANTITY PER INCH 36
THREAD DIRECTION RIGHT-HAND
CONNECTOR CABLE STRAIN RELIEF METHOD CRIMP TYPE
SHELL TYPE SOLID
MATING END QUANTITY 1
CONTACT POSITION ARRANGEMENT STYLE ABDB NONSTD SINGLE MATING END
INCLUDED CONTACT QUANTITY 1 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT REMOVABILITY REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPE COAXIAL PIN SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS 250.0 SINGLE MATING END SINGLE CONTACT GROUPING
RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS 50.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MAXIMUM FREQUENCY RATING 12400.0 MEGAHERTZ SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT GOLD SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION MIL-G-45204,TYPE 2,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPE CRIMP SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL LOCATION BACK SINGLE MATING END SINGLE CONTACT GROUPING
ENVIRONMENTAL PROTECTION MOISTURE RESISTANT AND VIBRATION RESISTANT AND SALT WATER RESISTANT
TEST DATA DOCUMENT 81349-MIL-C-39012 SPECIFICATION
SPECIFICATION/STANDARD DATA 81349-MIL-C-39012/55 GOVERNMENT SPECIFICATION
III PRECIOUS MATERIAL GOLD
III PRECIOUS MATERIAL AND WEIGHT 0.005 GOLD GRAINS, TROY
III PRECIOUS MATERIAL AND LOCATION CONTACT SURFACES GOLD
MANUFACTURERS CODE 81349
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE MIL-C-39012/55
MANUFACTURERS CODE 81349
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE M39012/55-4026

Restrictions/Controls & Freight Information | NSN 5935-01-014-1444

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Electro-static Discharge Susceptible:ANo known Electrostatic Discharge (ESD) or Electromagnetic Interference (EMI) sensitivity
Precious Metals Indicator Code:GItem contains gold
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
NMF Description 061680 ELEC WIRING PLUGS ETC
Less than car load rating
Less than truck load rating W Rating Variable
Water commodity Code 658 unknown
Originating Activity Code TX Defense Supply Center Columbus
Columbus, OH 43218
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 5935-01-014-1444

Category Code Description
Materiel Category and Inventory ManagerQ Electronics Materiel (DLA/GSA Items)
Appropriation and Budget Activity2 Stock Fund Secondary Items
Management Inventory Segment2 NONREPARABLE ITEMS (Exclusive of Insurance and Provisioning Items). This code will be used to identify items which are not reparable.
Specific Group/Generic Code0 Medical Materiel
Weapons Systems/End Item or Homogeneous Group00DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
Accounting Requirements CodeX Expendable item. An item of Army property coded with an ARC of ?X? in the AMDF. Expendable items require no formal accountability after issue from a stock record account. Commercial and fabricated items similar to items coded ?X? in the AMDF are considered expendable items.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDADepartment of the Army
Service OrganizationAU.S. Army
ReparabilityZThis is a nonreparable item. If condemned or economically unserviceable, then dispose at the level authorized replace the item.
Acquisition Advice CodesDDoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each
Category Code Description
Budget Code9 General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.
Materiel Management Aggregation CodeEHSX:ELECTRONIC COMPONENTS
Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.
Price ValidationV The current standard price has been validated.
  • The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.
  • The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.
  • ZOP or Standard price challenges are permissible but must be supported by adequate justification.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDFDepartment of the Air Force
Service OrganizationFU.S. Air Force
ReparabilityNStock Fund (except Munitions)
Acquisition Advice CodesDDoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each
Category Code Description
Stores Account Code1Marine Corps Stock Fund Account Item.
Combat Essentiality Code2Non-Critical Repair Part. Repair parts or major components whose failure in an end item will not render the end item inoperative or reduce its effectiveness below the minimum acceptable level of efficiency, and which do not fit the definition of Code 3 or 4 items.
Materiel Management CodeBAll CommoditiesDefense Logistics Agency, (DLA,)
Echelon Management Code2ICP/DSSC Marine Corps-managed Recoverability Code D items and Defense Logistics Agency (DLA)/TACOM/GSA) items which the integrated manager has not decontrolled.
Physical Category Code1Bin
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDMU.S. Marine Corps
Service OrganizationMU.S. Marine Corps
ReparabilityZNonreparable item. When unserviceable, condemn and dispose at the level indicated by the first digit of the maintenance code.
Acquisition Advice CodesDDoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each
Category Code Description
Cognizance Codes9BNavy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDNDepartment of the Navy
Service OrganizationNU.S. Navy
Acquisition Advice CodesDDoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each