Product Details | ELECTRICAL PLUG CONNECTOR

5935-01-044-4446 An electrical fitting with electrical contacts, constructed to be affixed to the end of a cable, conduit, coaxial line, cord or wiring for convenience in joining with other electrical connector(s) or PRINTED WIRING BOARD and is not designed to be mounted on a bulkhead, chasses, panel, PRINTED WIRING BOARD, or the like. Excludes JACK, TELEPHONE; JACK, TIP; PLUG, TELEPHONE; PLUG TIP; INSERT, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified); and SOCKET, PLUG-IN, ELECTRONIC COMPONENTS. See also LEAD ASSEMBLY, ELECTRICAL; WIRING HARNESS (as modified); and CABLE ASSEMBLY (as modified). For items without inserts, see SHELL, ELECTRICAL CONNECTOR.

Part Alternates: MS9012/20-0101, MS9012200101, M39012/16-0013, M39012/20-001, M39012/20-0101, M39012160013, M39012200001, M39012-20-0001, M3901220001, M39012200101, M39012-20-0101, CA196765, CA19676-5, L02103, UG913/U, UG913AU, UG913U, MILC3901220, MILC39012-20, 10145241 , 101B2800B, 101-B2800B, 3579169000, 357-9169-000, 5935-01-044-4446, 14-224-5321 , 01-044-4446, 5935010444446, 010444446, 142245321

Electrical and Electronic Equipment Components | Connectors, Electrical

Supply Group (FSG) NSN Assign. NIIN
59 13 JUL 1977 01-044-4446

Drawings & Photos | NSN 5935-01-044-4446


Demand History | NSN 5935-01-044-4446

Part Number Request Date QTY Origin
5935-01-044-4446 2022-12-363 556 DIBBS
5935-01-044-4446 2022-07-209 899 DIBBS
5935-01-044-4446 2021-02-46 1456 DIBBS
M39012160013 2019-06-157 7 Thailand
5935-01-044-4446 2018-06-165 1734 DIBBS
5935-01-044-4446 2017-07-205 3613 DIBBS
5935-01-044-4446 2017-07-194 3613 DIBBS
5935-01-044-4446 2016-11-319 2490 DIBBS
5935-01-044-4446 2016-11-308 2490 DIBBS
M39012/16-0013 2015-09-252 12 US
M39012200001 2015-05-126 338 US
M39012/20-0101 2014-05-136 12 US
5935-01-044-4446 2014-04-98 1371 DIBBS
5935-01-044-4446 2014-03-79 1321 DIBBS
M39012200101 2013-08-238 4 us
M39012200101 2012-12-341 6 United States
5935-01-044-4446 2012-06-181 1346 DIBBS
M39012200101 2012-04-118 2 PK
M39012/16-0013 2012-04-118 2 PK
M39012/20-0101 2012-04-118 2 PK
M39012/16-0013 2012-04-115 2 PK
M39012/20-0101 2012-04-115 2 PK
M39012/16-0013 2012-04-110 2 PK
M39012/20-0101 2012-04-110 5 PK
5935-01-044-4446 2012-01-03 806 DIBBS
5935-01-044-4446 2011-10-294 688 DIBBS
5935-01-044-4446 2011-08-223 733 DIBBS
5935-01-044-4446 2010-10-301 958 DIBBS
5935-01-044-4446 2010-09-257 186 DIBBS
5935-01-044-4446 2010-09-246 750 DIBBS
5935-01-044-4446 2010-07-211 414 DIBBS
5935-01-044-4446 2010-07-204 801 DIBBS
5935-01-044-4446 2010-05-146 490 DIBBS
5935-01-044-4446 2009-11-307 780 DIBBS
5935-01-044-4446 2009-05-121 3725 DIBBS
5935-01-044-4446 2008-11-316 2531 DIBBS
5935-01-044-4446 2007-08-225 3043 DIBBS
5935-01-044-4446 2007-07-207 8 Australia

Cross Reference | NSN 5935-01-044-4446

Part Number Cage Code Manufacturer
101-B2800B 94375 AUTOMATIC CONNECTOR
357-9169-000 94987 CUBIC DEFENSE APPLICATIONS, INC.
CA19676-5 71468 ITT CORPORATION DBA I T T CANNON
L02103 16236 DLA LAND AND MARITIME
M39012-20-0001 74868 AMPHENOL CORPORATION
M39012-20-0101 93459 AEROFLEX / WEINSCHEL, INC.
M39012/16-0013 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
M39012/20-001 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
M39012/20-0101 63365 BTC ELECTRONIC COMPONENTS, INC.
M39012/20-0101 74868 AMPHENOL CORPORATION
M39012/20-0101 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
MILC39012-20 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
MS9012/20-0101 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
UG913/U 74868 AMPHENOL CORPORATION
UG913AU 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5935-01-044-4446

Technical Data | NSN 5935-01-044-4446

Characteristic Specifications
BODY STYLE 3D ANGLE, SHAPE, INTERNAL COUPLING
OVERALL LENGTH 1.750 INCHES MAXIMUM
OVERALL HEIGHT 1.218 INCHES MAXIMUM
OVERALL DIAMETER 0.593 INCHES MAXIMUM
CONNECTOR LOCKING METHOD BAYONET LATCH
CONNECTOR CABLE STRAIN RELIEF METHOD COMPRESSION NUT
SHELL TYPE SOLID
SHELL MATERIAL COPPER ALLOY
MATING END QUANTITY 1
CONTACT POSITION ARRANGEMENT STYLE ABBJ BNC SINGLE MATING END
INCLUDED CONTACT QUANTITY 1 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT REMOVABILITY REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPE COAXIAL PIN SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS 500.0 SINGLE MATING END SINGLE CONTACT GROUPING
RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS 50.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MAXIMUM FREQUENCY RATING 4000.0 MEGAHERTZ SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MATERIAL COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT GOLD SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION MIL-G-45204 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPE CRIMP SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL LOCATION SIDE SINGLE MATING END SINGLE CONTACT GROUPING
ENVIRONMENTAL PROTECTION THERMAL SHOCK RESISTANT AND MOISTURE RESISTANT AND VIBRATION RESISTANT
TEST DATA DOCUMENT 81349-MIL-C-39012 SPECIFICATION
SPECIFICATION/STANDARD DATA 81349-MIL-C-39012/20 GOVERNMENT SPECIFICATION
III PRECIOUS MATERIAL GOLD
III PRECIOUS MATERIAL AND WEIGHT 0.005 GOLD GRAINS, TROY
III PRECIOUS MATERIAL AND LOCATION CONTACT SURFACE GOLD
MANUFACTURERS CODE 81349
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE MILC39012-20
MANUFACTURERS CODE 81349
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE M39012/20-0101

Restrictions/Controls & Freight Information | NSN 5935-01-044-4446

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Electro-static Discharge Susceptible:ANo known Electrostatic Discharge (ESD) or Electromagnetic Interference (EMI) sensitivity
Precious Metals Indicator Code:GItem contains gold
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 061680 ELEC WIRING PLUGS ETC
Less than car load rating
Less than truck load rating W Rating Variable
Water commodity Code 658 unknown
Originating Activity Code TX Defense Supply Center Columbus
Columbus, OH 43218
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 5935-01-044-4446

Category Code Description
Materiel Category and Inventory ManagerQ Electronics Materiel (DLA/GSA Items)
Appropriation and Budget Activity2 Stock Fund Secondary Items
Management Inventory Segment2 NONREPARABLE ITEMS (Exclusive of Insurance and Provisioning Items). This code will be used to identify items which are not reparable.
Specific Group/Generic Code0 Medical Materiel
Weapons Systems/End Item or Homogeneous Group00DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
Accounting Requirements CodeX Expendable item. An item of Army property coded with an ARC of ?X? in the AMDF. Expendable items require no formal accountability after issue from a stock record account. Commercial and fabricated items similar to items coded ?X? in the AMDF are considered expendable items.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDADepartment of the Army
Service OrganizationAU.S. Army
ReparabilityAItem requires special handling or condemnation procedures for specific reasons, such as precious metal content, high dollar value, critical material, or hazardous materiel. Refer to appropriate manuals or directives for specific instructions.
Acquisition Advice CodesDDoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each
Category Code Description
Budget Code9 General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.
Materiel Management Aggregation CodeEHSX:ELECTRONIC COMPONENTS
Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.
Price ValidationV The current standard price has been validated.
  • The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.
  • The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.
  • ZOP or Standard price challenges are permissible but must be supported by adequate justification.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDFDepartment of the Air Force
Service OrganizationFU.S. Air Force
ReparabilityNStock Fund (except Munitions)
Acquisition Advice CodesDDoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each
Category Code Description
Stores Account Code1Marine Corps Stock Fund Account Item.
Combat Essentiality Code2Non-Critical Repair Part. Repair parts or major components whose failure in an end item will not render the end item inoperative or reduce its effectiveness below the minimum acceptable level of efficiency, and which do not fit the definition of Code 3 or 4 items.
Materiel Management CodeBAll CommoditiesDefense Logistics Agency, (DLA,)
Echelon Management Code2ICP/DSSC Marine Corps-managed Recoverability Code D items and Defense Logistics Agency (DLA)/TACOM/GSA) items which the integrated manager has not decontrolled.
Echelon Identification CodeBConsumable Repair Parts
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDMU.S. Marine Corps
Service OrganizationMU.S. Marine Corps
ReparabilityZNonreparable item. When unserviceable, condemn and dispose at the level indicated by the first digit of the maintenance code.
Acquisition Advice CodesDDoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each
Category Code Description
Cognizance Codes9BNavy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDNDepartment of the Navy
Service OrganizationNU.S. Navy
Acquisition Advice CodesDDoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each