Product Details | ELECTRICAL PLUG CONNECTOR

5935-01-076-9460 An electrical fitting with electrical contacts, constructed to be affixed to the end of a cable, conduit, coaxial line, cord or wiring for convenience in joining with other electrical connector(s) or PRINTED WIRING BOARD and is not designed to be mounted on a bulkhead, chasses, panel, PRINTED WIRING BOARD, or the like. Excludes JACK, TELEPHONE; JACK, TIP; PLUG, TELEPHONE; PLUG TIP; INSERT, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified); and SOCKET, PLUG-IN, ELECTRONIC COMPONENTS. See also LEAD ASSEMBLY, ELECTRICAL; WIRING HARNESS (as modified); and CABLE ASSEMBLY (as modified). For items without inserts, see SHELL, ELECTRICAL CONNECTOR.

Part Alternates: MS3116E1626SW, MS3116E16-26SW, MS3116F1626SW, MS3116F16-26SW, MS3116F1626W, MS3116F16-26W, MS3116P1626SW, MS3116P16-26SW, MS3126E1626SW, MS3126E16-26SW, MS3126F1626SW, MS3126F16-26SW, MS3126P1626SW, MS3126P16-26SW, MS3476E1626SW, MS3476E16-26SW, MS3476L1626SW, MS3476L16-26SW, MS3476W1626SW, MS3476W16-26SW, M83723/13R1626W, M8372313R1626W, MB16A1626SW, MB16A-1626SW, MILC26482, MIL-C-26482, KPSE06E1626SW, KPSE06E-16-26SW, KPT06E1626SWSR, KPT06E16-26SWSR, PT06E1626SWSR, 0N06410412, 0N064104-12, 321003X540501M, 321-003X540-501M, 321003X5TO501M, 321-003X5TO-501M, 642AS09026, 642AS0902-6, 7909667-01, 810BA0957, 5935-01-076-9460, 01-076-9460, 5935010769460, 010769460, 790966701

Electrical and Electronic Equipment Components | Connectors, Electrical

Supply Group (FSG) NSN Assign. NIIN
59 16 MAY 1979 01-076-9460

Drawings & Photos | NSN 5935-01-076-9460


Demand History | NSN 5935-01-076-9460

Part Number Request Date QTY Origin
5935-01-076-9460 2023-11-316 618 DIBBS
5935-01-076-9460 2017-08-243 367 DIBBS
MS3126F1626SW 2017-08-237 1 United States
5935-01-076-9460 2017-06-174 1 US
5935-01-076-9460 2016-04-111 278 DIBBS
5935-01-076-9460 2013-10-297 2 MANUAL
MS3126F16-26SW 2013-10-297 2 AR
MILC26482 2011-01-27 4 Portugal
MS3116P1626SW 2008-01-09 50 United States

Cross Reference | NSN 5935-01-076-9460

Part Number Cage Code Manufacturer
0N064104-12 98230 NATIONAL SECURITY AGENCY
321-003X540-501M 59960 JANBRIDGE INC
321-003X5TO-501M 59960 JANBRIDGE INC
642AS0902-6 30003 NAVAL AIR SYSTEMS COMMAND
7909667-01 90536 LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN
810BA0957 A0199 OTO MELARA SPA
KPSE06E-16-26SW 71468 ITT CORPORATION DBA I T T CANNON
KPT06E16-26SWSR 71468 ITT CORPORATION DBA I T T CANNON
M83723/13R1626W 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
MB16A-1626SW 14283 AMPHENOL OPTIMIZE MANUFACTURING CO. DIV AMPHENOL AEROSPACE OPERATIONS
MIL-C-26482 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
MS3116E16-26SW 96906 MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS
MS3116F16-26SW 96906 MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS
MS3116F16-26W 96906 MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS
MS3116P16-26SW 96906 MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS
MS3126E16-26SW 96906 MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS
MS3126F16-26SW 96906 MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS
MS3126P16-26SW 96906 MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS
MS3476E16-26SW 96906 MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS
MS3476L16-26SW 96906 MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS
MS3476W16-26SW 96906 MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS
PT06E-16-26SW(SR) 77820 AMPHENOL CORPORATION DBA AMPHENOL AEROSPACE INDUSTRIAL

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5935-01-076-9460

Technical Data | NSN 5935-01-076-9460

Characteristic Specifications
BODY STYLE 7A STRAIGHT SHAPE, INTERNAL COUPLING
OVERALL LENGTH 1.420 INCHES MAXIMUM
OVERALL DIAMETER 1.183 INCHES MAXIMUM
CONNECTOR LOCKING METHOD BAYONET LATCH
THREADED DEVICE TYPE BACK SHELL
THREAD SERIES DESIGNATOR UNEF
NOMINAL THREAD SIZE 1.000 INCHES
THREAD CLASS 2A
THREAD QUANTITY PER INCH 20
THREAD DIRECTION RIGHT-HAND
NOMINAL THREAD LENGTH 0.290 INCHES
SHELL TYPE SOLID
SHELL MATERIAL ALUMINUM ALLOY 6061
SHELL MATERIAL DOCUMENT AND CLASSIFICATION QQ-A-367,T6 FED SPEC SINGLE MATERIAL RESPONSE
SHELL SURFACE TREATMENT CADMIUM
SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE
POLARIZATION METHOD KEYWAY OR MULTIPLE KEYWAY
INSERT POSITION IN DEG 300.0
MATING END QUANTITY 1
CONTACT POSITION ARRANGEMENT STYLE BCAA 16-26 SINGLE MATING END
INCLUDED CONTACT QUANTITY 26 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT REMOVABILITY REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPE ROUND SOCKET SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS 600.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT GOLD AND NICKEL SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION QQ-N-290,GRADE E FED SPEC 1ST TREATMENT RESPONSE AND MIL-G-45204,TY 1,CL 1,GRADE C MIL SPEC 2ND TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPE CRIMP SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL LOCATION BACK SINGLE MATING END SINGLE CONTACT GROUPING
ENVIRONMENTAL PROTECTION MOISTURE PROOF AND SALT WATER RESISTANT AND VIBRATION PROOF
SPECIAL FEATURES IN ORDER TO COMPLETE THE CONNECTOR ASSEMBLY,THE USER MUST OBTAIN/PROVIDE THE BACKSHELL; STANDARD VERSIONS MAY BE ORDERED AS NSN 5935-01-171-1966,P/N M85049/52-1-16W FOR THE STRAIGHT STYLE,OR NSN 5935-01-186-5611,P/N M85049/51-1-16W FOR THE RIGHT ANGLE STYLE
TEST DATA DOCUMENT 81349-MIL-C-26482 SPECIFICATION
SPECIFICATION/STANDARD DATA 96906-MS3476 GOVERNMENT STANDARD
III PRECIOUS MATERIAL GOLD
III PRECIOUS MATERIAL AND WEIGHT 0.026 GOLD GRAINS, TROY
III PRECIOUS MATERIAL AND LOCATION CONTACT SURFACES GOLD

Restrictions/Controls & Freight Information | NSN 5935-01-076-9460

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Electro-static Discharge Susceptible:ANo known Electrostatic Discharge (ESD) or Electromagnetic Interference (EMI) sensitivity
Precious Metals Indicator Code:GItem contains gold
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 061680 ELEC WIRING PLUGS ETC
Less than car load rating
Less than truck load rating W Rating Variable
Water commodity Code 658 unknown
Originating Activity Code TX Defense Supply Center Columbus
Columbus, OH 43218
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 5935-01-076-9460

Category Code Description
Materiel Category and Inventory ManagerQ Electronics Materiel (DLA/GSA Items)
Appropriation and Budget Activity2 Stock Fund Secondary Items
Management Inventory Segment2 NONREPARABLE ITEMS (Exclusive of Insurance and Provisioning Items). This code will be used to identify items which are not reparable.
Specific Group/Generic Code0 Medical Materiel
Weapons Systems/End Item or Homogeneous Group00DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
Accounting Requirements CodeX Expendable item. An item of Army property coded with an ARC of ?X? in the AMDF. Expendable items require no formal accountability after issue from a stock record account. Commercial and fabricated items similar to items coded ?X? in the AMDF are considered expendable items.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDADepartment of the Army
Service OrganizationAU.S. Army
ReparabilityZThis is a nonreparable item. If condemned or economically unserviceable, then dispose at the level authorized replace the item.
Acquisition Advice CodesDDoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each
Category Code Description
Budget Code9 General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.
Materiel Management Aggregation CodeEHSX:ELECTRONIC COMPONENTS
Price ValidationN The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
  • The price has not been analyzed or reviewed for accuracy.
  • ZOP or Standard price challenges are permissible, but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ?L? or?F?,the case must be evaluated locally where purchased or fabricated.
Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDFDepartment of the Air Force
Service OrganizationFU.S. Air Force
ReparabilityNStock Fund (except Munitions)
Acquisition Advice CodesDDoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each
Category Code Description
Stores Account Code1Marine Corps Stock Fund Account Item.
Combat Essentiality Code5Critical Repair Part to a Combat Essential End Item. Those parts or components whose failure in a combat essential end item will render the end item inoperative or reduce its effectiveness below the minimum acceptable level of efficiency.
Materiel Management CodeBAll CommoditiesDefense Logistics Agency, (DLA,)
Echelon Management Code2ICP/DSSC Marine Corps-managed Recoverability Code D items and Defense Logistics Agency (DLA)/TACOM/GSA) items which the integrated manager has not decontrolled.
Echelon Identification CodeKReserved
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDMU.S. Marine Corps
Service OrganizationMU.S. Marine Corps
ReparabilityZNonreparable item. When unserviceable, condemn and dispose at the level indicated by the first digit of the maintenance code.
Acquisition Advice CodesDDoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each
Category Code Description
Cognizance Codes9BNavy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Special Material Content9 Non-Hazardous or Non-Sensitive Item, does not require hazardous or special handling, packaging or precautions
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDNDepartment of the Navy
Service OrganizationNU.S. Navy
Acquisition Advice CodesDDoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each