Product Details | PLUG DUMMY CONNECTOR

5935-01-116-1806 An item specifically designed to mate with another connector to perform one or more special functions, such as to act as a cover or shield, to short contacts, or to open or close electrical circuits, in or on another connector. It is not designed for direct attachment to a cable, conduit, or wire, and cannot be used as a CONNECTOR, PLUG, ELECTRICAL. Excludes DUMMY PLUG, TELEPHONE.

Part Alternates: 22037366, 2-203736-6, 77C718186P001, 5935-01-116-1806, 01-116-1806, 5935011161806, 011161806

Electrical and Electronic Equipment Components | Connectors, Electrical

Supply Group (FSG) NSN Assign. NIIN
59 22 JUL 1981 01-116-1806

Drawings & Photos | NSN 5935-01-116-1806


Cross Reference | NSN 5935-01-116-1806

Part Number Cage Code Manufacturer
2-203736-6 00779 TYCO ELECTRONICS CORPORATION
77C718186P001 03538 LOCKHEED MARTIN CORPORATION DIV MST

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5935-01-116-1806

Technical Data | NSN 5935-01-116-1806

Characteristic Specifications
BODY STYLE 23A STRAIGHT SHAPE W/CLAMP
OVERALL LENGTH 1.980 INCHES MINIMUM AND 2.020 INCHES MAXIMUM
OVERALL HEIGHT 2.000 INCHES MINIMUM AND 2.060 INCHES MAXIMUM
OVERALL WIDTH 0.828 INCHES MINIMUM AND 0.858 INCHES MAXIMUM
SHELL TYPE HOOD, TOP OPENING
POLARIZATION METHOD GUIDE PIN/SOCKET
JACKSCREW TYPE AND LOCATION FEMALE LEFT-HAND AND FEMALE RIGHT-HAND
ROUND GUIDE TYPE AND LOCATION FEMALE POST LEFT-HAND TOP AND MALE POST LEFT-HAND BOTTOM
MATING END QUANTITY 1
CONTACT POSITION ARRANGEMENT STYLE BLAJ 34 SINGLE MATING END
INSERT MATERIAL PLASTIC DIALLYL PHTHALATE SINGLE MATING END
INSERT MATERIAL DOCUMENT AND CLASSIFICATION MIL-M-14 TYPE SDG-F MIL SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END
CONTACT REMOVABILITY REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
ENVIRONMENTAL PROTECTION MOISTURE RESISTANT AND SHOCK RESISTANT AND THERMAL SHOCK RESISTANT AND VIBRATION RESISTANT

Restrictions/Controls & Freight Information | NSN 5935-01-116-1806

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 061680 ELEC WIRING PLUGS ETC SUB2
Less than car load rating P 77.5
Less than truck load rating P 77.5
Water commodity Code 658 unknown
Originating Activity Code ZB Belgium
ZC
ZD
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable