Product Details | ELECTRICAL PLUG CONNECTOR

5935-01-251-4270 An electrical fitting with electrical contacts, constructed to be affixed to the end of a cable, conduit, coaxial line, cord or wiring for convenience in joining with other electrical connector(s) or PRINTED WIRING BOARD and is not designed to be mounted on a bulkhead, chasses, panel, PRINTED WIRING BOARD, or the like. Excludes JACK, TELEPHONE; JACK, TIP; PLUG, TELEPHONE; PLUG TIP; INSERT, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified); and SOCKET, PLUG-IN, ELECTRONIC COMPONENTS. See also LEAD ASSEMBLY, ELECTRICAL; WIRING HARNESS (as modified); and CABLE ASSEMBLY (as modified). For items without inserts, see SHELL, ELECTRICAL CONNECTOR.

Part Alternates: M39012/01-0504, M39012010504, MIL-C-39012/1, MILC390121, UG188U, 49F180, 5935-01-251-4270, 01-251-4270, 5935012514270, 012514270

Electrical and Electronic Equipment Components | Connectors, Electrical

Supply Group (FSG) NSN Assign. NIIN
59 19 MAR 1987 01-251-4270

Drawings & Photos | NSN 5935-01-251-4270


Demand History | NSN 5935-01-251-4270

Part Number Request Date QTY Origin
5935-01-251-4270 2026-03-61 4 DIBBS
5935-01-251-4270 2026-02-48 4 DIBBS
5935-01-251-4270 2024-09-247 1 DIBBS
M39012010504 2023-08-230 6 United States
5935-01-251-4270 2023-08-214 5 United States
5935-01-251-4270 2023-05-122 1 DIBBS
M39012010504 2023-01-30 1 United States
5935-01-251-4270 2022-06-167 4 DIBBS
5935-01-251-4270 2022-03-77 11 DIBBS
5935-01-251-4270 2022-03-72 5 DIBBS
5935-01-251-4270 2022-03-68 2 DIBBS
5935-01-251-4270 2022-03-66 11 DIBBS
5935-01-251-4270 2021-07-194 1 US
5935-01-251-4270 2021-07-194 1 US
5935-01-251-4270 2021-07-187 5 DIBBS
5935-01-251-4270 2021-04-103 2 DIBBS
5935-01-251-4270 2020-08-217 310 UM
5935-01-251-4270 2020-07-195 5 DIBBS
5935-01-251-4270 2020-07-195 10 DIBBS
5935-01-251-4270 2020-06-182 5 DIBBS
5935-01-251-4270 2020-04-121 5 DIBBS
5935-01-251-4270 2020-04-113 32 DIBBS
5935-01-251-4270 2019-12-346 1419 DIBBS
5935-01-251-4270 2018-12-346 3073 US
5935-01-251-4270 2018-10-277 3073 DIBBS
5935-01-251-4270 2018-01-25 101 DIBBS
5935-01-251-4270 2017-11-334 1229 DIBBS
5935-01-251-4270 2017-09-271 743 DIBBS
5935-01-251-4270 2017-07-205 1000 DIBBS
5935-01-251-4270 2017-07-194 1000 DIBBS
5935-01-251-4270 2016-10-292 504 DIBBS
5935-01-251-4270 2016-01-10 345 DIBBS
5935-01-251-4270 2015-11-313 230 DIBBS
5935-01-251-4270 2015-10-278 193 DIBBS
M39012010504 2014-03-76 1 Taiwan
5935-01-251-4270 2012-04-103 12 DIBBS
5935-01-251-4270 2012-03-80 12 DIBBS
5935-01-251-4270 2012-03-75 291 DIBBS
5935-01-251-4270 2012-01-17 12 DIBBS
5935-01-251-4270 2012-01-09 245 DIBBS
5935-01-251-4270 2011-11-320 610 DIBBS
5935-01-251-4270 2011-10-297 333 DIBBS
5935-01-251-4270 2011-07-190 14 DIBBS
5935-01-251-4270 2011-06-154 401 DIBBS
5935-01-251-4270 2011-04-104 125 DIBBS
5935-01-251-4270 2011-03-73 97 DIBBS
5935-01-251-4270 2011-03-69 10 DIBBS
5935-01-251-4270 2011-03-67 6 DIBBS
5935-01-251-4270 2011-02-48 71 DIBBS
5935-01-251-4270 2011-02-34 323 DIBBS
5935-01-251-4270 2010-07-210 330 DIBBS
5935-01-251-4270 2010-05-139 213 DIBBS
5935-01-251-4270 2010-04-95 579 DIBBS
5935-01-251-4270 2009-10-303 570 DIBBS
5935-01-251-4270 2009-10-300 547 DIBBS
5935-01-251-4270 2009-09-259 200 DIBBS
5935-01-251-4270 2008-05-122 476 DIBBS
5935-01-251-4270 2008-01-08 1263 DIBBS
5935-01-251-4270 2007-08-225 454 DIBBS

Cross Reference | NSN 5935-01-251-4270

Part Number Cage Code Manufacturer
49F180 80067 ARMED SERVICES ELECTRO STANDARDS AGENCY
M39012/01-0504 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
MIL-C-39012/1 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
UG188U 80058 JOINT ELECTRONICS TYPE DESIGNATION SYSTEM

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5935-01-251-4270

Technical Data | NSN 5935-01-251-4270

Characteristic Specifications
BODY STYLE 5D STRAIGHT SHAPE, INTERNAL COUPLING
OVERALL LENGTH 1.516 INCHES MAXIMUM
OVERALL DIAMETER 0.827 INCHES MAXIMUM
CONNECTOR LOCKING METHOD INTERNALLY THREADED COUPLING RING
THREADED DEVICE TYPE COUPLING FACILITY
THREAD SERIES DESIGNATOR UNEF
NOMINAL THREAD SIZE 0.625 INCHES
THREAD CLASS 2B
THREAD QUANTITY PER INCH 24
THREAD DIRECTION RIGHT-HAND
SHELL TYPE SOLID
SHELL MATERIAL COPPER ALLOY
SHELL MATERIAL DOCUMENT AND CLASSIFICATION QQ-B-613 FED SPEC SINGLE MATERIAL RESPONSE
POLARIZATION METHOD KEYWAY OR MULTIPLE KEYWAY
INSERT POSITION IN DEG 0.0
MATING END QUANTITY 1
CONTACT POSITION ARRANGEMENT STYLE ABCE N SINGLE MATING END
INCLUDED CONTACT QUANTITY 1 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT REMOVABILITY NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPE COAXIAL PIN SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS 1000.0 SINGLE MATING END SINGLE CONTACT GROUPING
RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS 50.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT GOLD SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION MIL-G-45204,TYPE 2,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPE CRIMP SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL LOCATION BACK SINGLE MATING END SINGLE CONTACT GROUPING
ENVIRONMENTAL PROTECTION MOISTURE RESISTANT AND SHOCK RESISTANT AND THERMAL SHOCK RESISTANT AND VIBRATION RESISTANT
TEST DATA DOCUMENT 81349-MIL-C-39012 SPECIFICATION
SPECIFICATION/STANDARD DATA 81349-MIL-C-39012/1 GOVERNMENT SPECIFICATION
III PRECIOUS MATERIAL GOLD
III PRECIOUS MATERIAL AND WEIGHT 0.005 GOLD GRAINS, TROY
III PRECIOUS MATERIAL AND LOCATION CONTACT SURFACES GOLD
MANUFACTURERS CODE 81349
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE MIL-C-39012/1
MANUFACTURERS CODE 81349
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE M39012/01-0504

Restrictions/Controls & Freight Information | NSN 5935-01-251-4270

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Electro-static Discharge Susceptible:ANo known Electrostatic Discharge (ESD) or Electromagnetic Interference (EMI) sensitivity
Precious Metals Indicator Code:GItem contains gold
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 061680 ELEC WIRING PLUGS ETC
Less than car load rating
Less than truck load rating W Rating Variable
Water commodity Code 658 unknown
Originating Activity Code TX Defense Supply Center Columbus
Columbus, OH 43218
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 5935-01-251-4270

Category Code Description
Materiel Category and Inventory ManagerQ Electronics Materiel (DLA/GSA Items)
Appropriation and Budget Activity2 Stock Fund Secondary Items
Management Inventory Segment2 NONREPARABLE ITEMS (Exclusive of Insurance and Provisioning Items). This code will be used to identify items which are not reparable.
Specific Group/Generic Code0 Medical Materiel
Weapons Systems/End Item or Homogeneous Group00DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
Accounting Requirements CodeX Expendable item. An item of Army property coded with an ARC of ?X? in the AMDF. Expendable items require no formal accountability after issue from a stock record account. Commercial and fabricated items similar to items coded ?X? in the AMDF are considered expendable items.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDADepartment of the Army
Service OrganizationAU.S. Army
ReparabilityAItem requires special handling or condemnation procedures for specific reasons, such as precious metal content, high dollar value, critical material, or hazardous materiel. Refer to appropriate manuals or directives for specific instructions.
Acquisition Advice CodesDDoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each
Category Code Description
Budget Code9 General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.
Materiel Management Aggregation CodeEHSX:ELECTRONIC COMPONENTS
Price ValidationN The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
  • The price has not been analyzed or reviewed for accuracy.
  • ZOP or Standard price challenges are permissible, but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ?L? or?F?,the case must be evaluated locally where purchased or fabricated.
Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDFDepartment of the Air Force
Service OrganizationFU.S. Air Force
ReparabilityNStock Fund (except Munitions)
Acquisition Advice CodesDDoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each
Category Code Description
Stores Account Code1Marine Corps Stock Fund Account Item.
Combat Essentiality Code2Non-Critical Repair Part. Repair parts or major components whose failure in an end item will not render the end item inoperative or reduce its effectiveness below the minimum acceptable level of efficiency, and which do not fit the definition of Code 3 or 4 items.
Materiel Management CodeBAll CommoditiesDefense Logistics Agency, (DLA,)
Echelon Management Code2ICP/DSSC Marine Corps-managed Recoverability Code D items and Defense Logistics Agency (DLA)/TACOM/GSA) items which the integrated manager has not decontrolled.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDMU.S. Marine Corps
Service OrganizationMU.S. Marine Corps
ReparabilityZNonreparable item. When unserviceable, condemn and dispose at the level indicated by the first digit of the maintenance code.
Acquisition Advice CodesDDoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each
Category Code Description
Cognizance Codes9BNavy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Special Material Content9 Non-Hazardous or Non-Sensitive Item, does not require hazardous or special handling, packaging or precautions
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDNDepartment of the Navy
Service OrganizationNU.S. Navy
Acquisition Advice CodesDDoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each