Product Details | ELECTRICAL CONNECTOR BRACKET

5935-01-618-7868 A bracket designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical connector(s). Excludes BRACKET, ANGLE. See also PLATE, RETAINING, ELECTRICAL CONNECTOR.

Part Alternates: 450FA001NF10G , 5935-01-618-7868, 01-618-7868, 5935016187868, 016187868

Electrical and Electronic Equipment Components | Connectors, Electrical

Supply Group (FSG) NSN Assign. NIIN
59 2013126 01-618-7868

Demand History | NSN 5935-01-618-7868

Part Number Request Date QTY Origin
450FA001NF10G 2023-09-260 79 DIBBS
450FA001NF10G 2023-04-116 37 DIBBS
450FA001NF10G 2022-05-144 673 DIBBS
450FA001NF10G 2022-05-135 368 DIBBS
450FA001NF10G 2022-05-135 32 DIBBS
450FA001NF10G 2022-05-135 155 DIBBS
450FA001NF10G 2022-05-135 23 DIBBS
450FA001NF10G 2022-05-131 150 DIBBS
450FA001NF10G 2022-05-130 146 DIBBS
450FA001NF10G 2021-06-159 23 DIBBS
450FA001NF10G 2021-05-143 557 DIBBS
450FA001NF10G 2021-05-129 46 DIBBS
450FA001NF10G 2021-03-87 24 DIBBS
450FA001NF10G 2021-03-67 24 DIBBS
450FA001NF10G 2021-02-56 24 DIBBS
450FA001NF10G 2019-01-31 240 DIBBS
5935-01-618-7868 2015-07-211 71 DIBBS
5935-01-618-7868 2014-10-281 68 DIBBS
5935-01-618-7868 2014-09-271 154 DIBBS
5935-01-618-7868 2014-01-08 3 DIBBS
5935-01-618-7868 2013-12-353 2 DIBBS

Cross Reference | NSN 5935-01-618-7868

Part Number Cage Code Manufacturer
450FA001NF10G 06324 GLENAIR, INC.

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5935-01-618-7868

Technical Data | NSN 5935-01-618-7868

Characteristic Specifications
OVERALL DIAMETER 0.750 INCHES NOMINAL
MATERIAL ALUMINUM ALLOY
SURFACE TREATMENT CADMIUM
MOUNTING FACILITY TYPE AND QUANTITY 1 THREADED COUPLING
THREAD SERIES DESIGNATOR UNEF
NOMINAL THREAD SIZE 0.562 INCHES
THREAD QUANTITY PER INCH 24
SPECIAL FEATURES QWIK-TY, STRAIN RELIEFS, FOR MIL=DTL-38999 SER. I AND II CNNECTORS
III END ITEM IDENTIFICATION DF-16

Restrictions/Controls & Freight Information | NSN 5935-01-618-7868

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Electro-static Discharge Susceptible:ANo known Electrostatic Discharge (ESD) or Electromagnetic Interference (EMI) sensitivity
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 093600 BRACKETS/BUSHINGS/JOINTS/MOUNTS ETC
Less than car load rating
Less than truck load rating Q 70.0
Water commodity Code 72D unknown
Originating Activity Code SU Ogden Air Logistics Center
Hill AFB, UT 84056-5609
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 5935-01-618-7868

Category Code Description
Budget Code9 General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.
Price ValidationN The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
  • The price has not been analyzed or reviewed for accuracy.
  • ZOP or Standard price challenges are permissible, but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ?L? or?F?,the case must be evaluated locally where purchased or fabricated.
Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.
Materiel Management Aggregation CodeWFSU:F-16 AIR COMBAT FIGHTER
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDFDepartment of the Air Force
Service OrganizationFU.S. Air Force
ReparabilityNStock Fund (except Munitions)
Acquisition Advice CodesZINSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each