Product Details | ELECTRICAL COIL

5950-00-034-4074 An item generally consisting of one or more turns of wire or similar conductive material (in special cases it may be considered as a partial turn). It is specifically designed to concentrate magnetic flux generated by the flow of an electric current, to induce in itself an electromotive force, and to add or subtract inductive reactance in a circuit. It may include tuning devices, integral resistors and capacitors; however, excludes FILTER (as modified). For coils wound on resistors which are designed to be inserted into the circuit of a radio frequency stage to suppress high frequency parasitic oscillations, see SUPPRESSOR, PARASITIC..

Part Alternates: 50216, 57904, 5950-00-034-4074, 00-034-4074, 5950000344074, 000344074

Electrical and Electronic Equipment Components | Coils and Transformers

Supply Group (FSG) NSN Assign. NIIN
59 01 JAN 1961 00-034-4074

Demand History | NSN 5950-00-034-4074

Part Number Request Date QTY Origin
50216 2026-04-91 24 DIBBS
57904 2026-04-91 24 DIBBS
5950-00-034-4074 2025-04-94 5 Germany
5950-00-034-4074 2024-10-296 11 Germany
50216 2023-11-316 21 DIBBS
57904 2023-11-316 21 DIBBS
50216 2023-06-173 19 DIBBS
57904 2023-06-173 19 DIBBS
50216 2022-11-317 26 DIBBS
57904 2022-11-317 26 DIBBS
50216 2022-06-160 12 DIBBS
57904 2022-06-160 12 DIBBS
50216 2022-03-69 9 DIBBS
57904 2022-03-69 9 DIBBS
50216 2020-12-357 28 DIBBS
57904 2020-12-357 28 DIBBS
50216 2020-10-282 20 DIBBS
57904 2020-10-282 20 DIBBS
50216 2020-08-219 5 DIBBS
57904 2020-08-219 5 DIBBS
50216 2020-06-153 6 DIBBS
57904 2020-06-153 6 DIBBS
50216 2020-05-138 6 DIBBS
57904 2020-05-138 6 DIBBS
50216 2019-07-192 12 DIBBS
57904 2019-07-192 12 DIBBS
5950-00-034-4074 2018-06-162 15 DIBBS
5950-00-034-4074 2018-05-151 15 DIBBS
5950-00-034-4074 2017-10-289 30 DIBBS
5950-00-034-4074 2017-10-288 30 DIBBS
5950-00-034-4074 2017-07-208 13 DIBBS
5950-00-034-4074 2017-04-100 23 DIBBS
5950-00-034-4074 2017-03-61 22 DIBBS
5950-00-034-4074 2017-01-08 14 DIBBS
5950-00-034-4074 2016-03-87 35 DIBBS
5950-00-034-4074 2016-02-48 17 DIBBS
5950-00-034-4074 2015-10-298 12 DIBBS
5950-00-034-4074 2015-03-71 27 DIBBS
5950-00-034-4074 2015-03-60 27 DIBBS
5950-00-034-4074 2014-11-314 36 DIBBS
5950-00-034-4074 2014-10-303 36 DIBBS
5950-00-034-4074 2014-10-281 22 United States
5950-00-034-4074 2014-08-219 22 DIBBS
5950-00-034-4074 2014-07-208 22 DIBBS
5950-00-034-4074 2014-05-131 13 DIBBS
5950-00-034-4074 2014-02-59 22 DIBBS
5950-00-034-4074 2013-11-308 22 DIBBS
5950-00-034-4074 2012-08-226 0 DIBBS
5950-00-034-4074 2012-06-153 18 DIBBS
5950-00-034-4074 2011-11-308 16 DIBBS
5950-00-034-4074 2011-10-276 0 DIBBS
5950-00-034-4074 2011-09-264 9 DIBBS
5950-00-034-4074 2011-05-145 11 DIBBS
5950-00-034-4074 2010-12-337 9 DIBBS
5950-00-034-4074 2010-10-294 10 DIBBS
5950-00-034-4074 2010-07-211 8 DIBBS
5950-00-034-4074 2009-05-121 11 DIBBS
5950-00-034-4074 2008-05-122 27 DIBBS
5950-00-034-4074 2007-11-320 13 DIBBS
5950-00-034-4074 2007-07-191 16 DIBBS

Cross Reference | NSN 5950-00-034-4074

Part Number Cage Code Manufacturer
50216 64053 COILTRON INC
57904 81982 HYDRO-AIRE, INC.

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5950-00-034-4074

Technical Data | NSN 5950-00-034-4074

Characteristic Specifications
TERMINAL TYPE AND QUANTITY 2 WIRE LEAD
RATING METHOD ELECTRICAL AND WINDING TURNS SINGLE COMPONENT SINGLE WINDING
TURN QUANTITY 1425 SINGLE COMPONENT SINGLE WINDING
WINDING CONDUCTOR SIZE 0.00893 INCHES AMERICAN WIRE GAGE SINGLE COMPONENT SINGLE WINDING
WINDING OPERATING VOLTAGE 1000.00 AC VOLTS NOMINAL SINGLE COMPONENT SINGLE WINDING
DC RESISTANCE RATING IN OHMS 28.500 SINGLE COMPONENT SINGLE WINDING
CORE CONSTRUCTION POWDERED SINGLE COMPONENT
WINDING QUANTITY 1 SINGLE COMPONENT
MOUNTING METHOD FLANGE AND UNTHREADED HOLE SINGLE GROUP
MOUNTING FACILITY QUANTITY 4 SINGLE GROUP
MOUNTING HOLE DIAMETER 0.160 INCHES NOMINAL SINGLE GROUP
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH 1.090 INCHES NOMINAL SINGLE MOUNTING FACILITY SINGLE CENTER GROUP
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH 0.630 INCHES NOMINAL SINGLE MOUNTING FACILITY SINGLE CENTER GROUP
INCLOSURE TYPE FULLY INCLOSED
BODY LENGTH 1.210 INCHES NOMINAL
BODY HEIGHT 1.380 INCHES NOMINAL
BODY WIDTH 0.930 INCHES NOMINAL
RELIABILITY INDICATOR NOT ESTABLISHED

Restrictions/Controls & Freight Information | NSN 5950-00-034-4074

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:UPrecious metal type is unknown
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
NMF Description 063420 TRANSFORMERS,NOI,OR TRANSFORMER PAR
Less than car load rating
Less than truck load rating W Rating Variable
Water commodity Code 72D unknown
Originating Activity Code XX
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 5950-00-034-4074

Category Code Description
Budget Code9 General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.
Materiel Management Aggregation CodeEHSX:ELECTRONIC COMPONENTS
Price ValidationN The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
  • The price has not been analyzed or reviewed for accuracy.
  • ZOP or Standard price challenges are permissible, but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ?L? or?F?,the case must be evaluated locally where purchased or fabricated.
Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDFDepartment of the Air Force
Service OrganizationFU.S. Air Force
ReparabilityNStock Fund (except Munitions)
Acquisition Advice CodesDDoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each
Category Code Description
Cognizance Codes9BNavy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDNDepartment of the Navy
Service OrganizationNU.S. Navy
Acquisition Advice CodesDDoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each