Product Details | AUDIO FREQUENCY TRANSFORMER

5950-00-892-9947 A transformer which is designed so that part or all of its range of operating frequencies is 20 kilohertz (kilocycles) and below. The maximum value may extend into the radio frequency range. It is generally used in the input, output, amplifier, or oscillator stages of audio and sonar devices.

Part Alternates: 27D36, 3603, 5950-00-892-9947, 00-892-9947, 5950008929947, 008929947

Electrical and Electronic Equipment Components | Coils and Transformers

Supply Group (FSG) NSN Assign. NIIN
59 20 JAN 1967 00-892-9947

Cross Reference | NSN 5950-00-892-9947

Part Number Cage Code Manufacturer
27D36 96256 THORDARSON INC
3603 62035 BECHDON COMPANY, THE

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5950-00-892-9947

Technical Data | NSN 5950-00-892-9947

Characteristic Specifications
(NON-CORE DATA) WINDING TAP LOCATION CENTER TAP SINGLE COMPONENT SINGLE PRIMARY
WINDING OPERATING CURRENT 20.0 MILLIAMPERES DC MAXIMUM SINGLE COMPONENT SINGLE PRIMARY
IMPEDANCE RATING IN OHMS 200.0 NOMINAL SINGLE COMPONENT SINGLE PRIMARY 100.0 NOMINAL SINGLE COMPONENT ALL SECONDARY
FREQUENCY RATING 40.0 HERTZ MINIMUM AND 20.0 KILOHERTZ MAXIMUM SINGLE COMPONENT
(NON-CORE DATA) FREQUENCY RESPONSE TOLERANCE IN DECIBELS -2.0 TO 2.0 SINGLE COMPONENT
MAXIMUM TRANSFORMER POWER RATING 1.0 WATTS SINGLE COMPONENT
WINDING FUNCTION AND QUANTITY 1 PRIMARY AND 2 SECONDARY SINGLE COMPONENT
MOUNTING METHOD FLANGE AND UNTHREADED HOLE SINGLE GROUP
MOUNTING FACILITY QUANTITY 4 SINGLE GROUP
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH 1.312 INCHES NOMINAL SINGLE MOUNTING FACILITY SINGLE CENTER GROUP
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH 1.312 INCHES NOMINAL SINGLE MOUNTING FACILITY SINGLE CENTER GROUP
INCLOSURE TYPE HERMETICALLY SEALED
BODY LENGTH 2.250 INCHES NOMINAL
BODY OUTSIDE DIAMETER 1.625 INCHES NOMINAL

Restrictions/Controls & Freight Information | NSN 5950-00-892-9947

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 063420 TRANSFORMERS,NOI,OR TRANSFORMER PAR
Less than car load rating P 77.5
Less than truck load rating W Rating Variable
Water commodity Code 595 unknown
Originating Activity Code TX Defense Supply Center Columbus
Columbus, OH 43218
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable