Product Details | AUDIO FREQUENCY TRANSFORMER

5950-01-090-9131 A transformer which is designed so that part or all of its range of operating frequencies is 20 kilohertz (kilocycles) and below. The maximum value may extend into the radio frequency range. It is generally used in the input, output, amplifier, or oscillator stages of audio and sonar devices.

Part Alternates: C88394, C8839-4, X1215, X12151, X-1215-1, 92324, 9-232-4, 93054, 9-305-4, 5950-01-090-9131, 01-090-9131, 5950010909131, 010909131

Electrical and Electronic Equipment Components | Coils and Transformers

Supply Group (FSG) NSN Assign. NIIN
59 27 FEB 1980 01-090-9131

Demand History | NSN 5950-01-090-9131

Part Number Request Date QTY Origin
9-305-4 2025-10-279 245 DIBBS
X-1215-1 2025-10-279 245 DIBBS
9-305-4 2025-09-268 245 DIBBS
X-1215-1 2025-09-268 245 DIBBS
C88394 2024-01-19 4 US
5950-01-090-9131 2023-09-271 2 Taiwan
5950-01-090-9131 2023-09-269 2 Taiwan
9-305-4 2022-08-242 165 DIBBS
X-1215-1 2022-08-242 165 DIBBS
5950-01-090-9131 2021-08-238 10 Taiwan
9-305-4 2021-07-195 1116 DIBBS
X-1215-1 2021-07-195 1116 DIBBS
9-305-4 2021-06-180 1116 DIBBS
X-1215-1 2021-06-180 1116 DIBBS
9-305-4 2020-07-203 49 DIBBS
X-1215-1 2020-07-203 49 DIBBS
9-305-4 2020-06-181 412 DIBBS
X-1215-1 2020-06-181 412 DIBBS
9-305-4 2020-06-166 412 DIBBS
X-1215-1 2020-06-166 412 DIBBS
9-305-4 2020-06-160 328 DIBBS
X-1215-1 2020-06-160 328 DIBBS
9-305-4 2020-05-149 328 DIBBS
X-1215-1 2020-05-149 328 DIBBS
93054 2020-05-134 12 United States
X12151 2020-05-134 12 United States
9-305-4 2020-02-50 68 DIBBS
X-1215-1 2020-02-50 68 DIBBS
9-305-4 2020-01-30 7 DIBBS
X-1215-1 2020-01-30 7 DIBBS
5950-01-090-9131 2019-06-173 1 Taiwan
9-305-4 2019-05-133 141 DIBBS
C8839-4 2019-05-133 141 DIBBS
X-1215-1 2019-05-133 141 DIBBS
5950-01-090-9131 2019-05-130 1 Taiwan
9-305-4 2019-05-122 141 DIBBS
C8839-4 2019-05-122 141 DIBBS
X-1215-1 2019-05-122 141 DIBBS
5950-01-090-9131 2019-04-118 5 Taiwan
5950-01-090-9131 2018-05-151 354 DIBBS
5950-01-090-9131 2017-08-233 202 DIBBS
5950-01-090-9131 2017-03-61 487 DIBBS
5950-01-090-9131 2016-10-299 217 DIBBS
5950-01-090-9131 2016-06-159 350 DIBBS
5950-01-090-9131 2016-03-62 140 DIBBS
5950-01-090-9131 2015-12-362 470 DIBBS
5950-01-090-9131 2015-06-159 227 DIBBS
5950-01-090-9131 2015-01-28 197 DIBBS
5950-01-090-9131 2014-09-252 231 DIBBS
5950-01-090-9131 2014-07-199 223 DIBBS
5950-01-090-9131 2014-04-98 132 DIBBS
5950-01-090-9131 2014-03-86 126 DIBBS
5950-01-090-9131 2013-12-364 116 DIBBS
5950-01-090-9131 2013-06-161 256 DIBBS
5950-01-090-9131 2013-01-23 256 DIBBS
5950-01-090-9131 2012-07-209 508 DIBBS
5950-01-090-9131 2011-09-273 106 DIBBS
5950-01-090-9131 2011-08-237 256 DIBBS
5950-01-090-9131 2011-08-227 4 Taiwan
5950-01-090-9131 2011-08-223 4 Taiwan
5950-01-090-9131 2011-06-180 8 US
5950-01-090-9131 2011-05-122 101 DIBBS
5950-01-090-9131 2011-05-122 104 DIBBS
5950-01-090-9131 2011-02-34 101 DIBBS

Cross Reference | NSN 5950-01-090-9131

Part Number Cage Code Manufacturer
9-232-4 52797 AUTOMATION PRODUCTS GROUP, INC.
9-305-4 52797 AUTOMATION PRODUCTS GROUP, INC.
C8839-4 81755 LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN AERONAUTICS
X-1215-1 90095 PULSE ELECTRONICS CORPORATION DBA PULSE COMPONENTS DIVISION
X1215 90095 PULSE ELECTRONICS CORPORATION DBA PULSE COMPONENTS DIVISION

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5950-01-090-9131

Technical Data | NSN 5950-01-090-9131

Characteristic Specifications
TERMINAL TYPE AND QUANTITY 4 SOLDER STUD AND 1 WIRE LEAD
IMPEDANCE RATING IN OHMS 2000.0 NOMINAL SINGLE COMPONENT SINGLE PRIMARY 37.5 NOMINAL SINGLE COMPONENT SINGLE SECONDARY
FREQUENCY RATING 1.0 MEGAHERTZ NOMINAL SINGLE COMPONENT
PRIMARY TO SECONDARY TURN RATIO 1 TO 1 SINGLE COMPONENT
WINDING SHIELDING METHOD EXTERNAL INCLOSURE GROUNDED AND BROUGHT OUT TO TERMINAL SINGLE COMPONENT
WINDING FUNCTION AND QUANTITY 1 PRIMARY AND 1 SECONDARY SINGLE COMPONENT
MOUNTING METHOD THREADED HOLE SINGLE GROUP
MOUNTING FACILITY QUANTITY 2 SINGLE GROUP
THREAD SERIES DESIGNATOR UNC SINGLE GROUP
NOMINAL THREAD SIZE 0.086 INCHES SINGLE GROUP
(NON-CORE DATA) THREAD CLASS 2B SINGLE GROUP
(NON-CORE DATA) THREAD DIRECTION RIGHT-HAND SINGLE GROUP
DISTANCE BETWEEN MOUNTING FACILITY CENTERS 1.200 INCHES NOMINAL SINGLE MOUNTING FACILITY SINGLE CENTER GROUP
INCLOSURE TYPE FULLY INCLOSED
BODY LENGTH 1.400 INCHES NOMINAL
BODY HEIGHT 0.830 INCHES MAXIMUM
BODY WIDTH 0.880 INCHES NOMINAL
RELIABILITY INDICATOR NOT ESTABLISHED

Restrictions/Controls & Freight Information | NSN 5950-01-090-9131

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:BMunitions List Item - Mutilation (MUT) to the point of scrap required. (Formerly: Demilitarization not required. Trade Security Controls (TSCs) required at disposition.)
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:UPrecious metal type is unknown
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
NMF Description 063420 TRANSFORMERS,NOI,OR TRANSFORMER PAR
Less than car load rating
Less than truck load rating W Rating Variable
Water commodity Code 595 unknown
Originating Activity Code TX Defense Supply Center Columbus
Columbus, OH 43218
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 5950-01-090-9131

Category Code Description
Budget Code9 General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.
Materiel Management Aggregation CodeEHSX:ELECTRONIC COMPONENTS
Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.
Price ValidationV The current standard price has been validated.
  • The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.
  • The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.
  • ZOP or Standard price challenges are permissible but must be supported by adequate justification.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDFDepartment of the Air Force
Service OrganizationFU.S. Air Force
ReparabilityNStock Fund (except Munitions)
Acquisition Advice CodesDDoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each
Category Code Description
Cognizance Codes9BNavy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDNDepartment of the Navy
Service OrganizationNU.S. Navy
Acquisition Advice CodesDDoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each