Product Details | POWER TRANSFORMER

5950-01-191-9622 A transformer consisting of one or more primary winding(s) and one or more secondary winding(s). It may be designed for direct connection to an alternating current source for purposes of changing the secondary volts and amperes or designed to eliminate metallic interconnection between circuits in an overall one to one voltage ratio, with or without additional output windings, or items designed to automatically maintain a constant output voltage within specified limits under varying input or load conditions. Also includes items having a provision for mechanically changing the turns ratio or inductive coupling in progressive increments by means of voltage taps, ratio adjuster, or devices oe similar design. For transformers having winding(s) common to both input and output circuits, see TRANSFORMER (1), POWER, AUTOTRANSFORMER. Excludes TRANSFORMER (1), PULSE.20259500022Coils and Transformers61200044Transformers: Distribution and Power Station

Part Alternates: A333444, A3-33444, 11G2358200, 11G2358-200, 5950-01-191-9622, 01-191-9622, 5950011919622, 011919622

Electrical and Electronic Equipment Components | Coils and Transformers

Supply Group (FSG) NSN Assign. NIIN
59 01-191-9622

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5950-01-191-9622

Technical Data | NSN 5950-01-191-9622

Characteristic Specifications
TERMINAL TYPE AND QUANTITY 17 WIRE LEAD
(NON-CORE DATA) WINDING TAP LOCATION NEUTRAL TAP SINGLE COMPONENT 1ST SECONDARY NEUTRAL TAP SINGLE COMPONENT 2ND SECONDARY
WINDING OPERATING VOLTAGE 37.00 AC VOLTS NOMINAL SINGLE COMPONENT 1ST SECONDARY 190.00 AC VOLTS NOMINAL SINGLE COMPONENT 2ND SECONDARY 2.50 AC VOLTS NOMINAL SINGLE COMPONENT 3RD SECONDARY 2.50 AC VOLTS NOMINAL SINGLE COMPONENT 4TH SECONDARY 440.00 AC VOLTS NOMINAL SINGLE COMPONENT SINGLE PRIMARY
FREQUENCY RATING 60.0 HERTZ NOMINAL SINGLE COMPONENT
WINDING FUNCTION AND QUANTITY 1 PRIMARY AND 5 SECONDARY SINGLE COMPONENT
INPUT-OUTPUT PHASE RELATIONSHIP THREE PHASE TO THREE PHASE AND THREE PHASE TO SINGLE PHASE SINGLE COMPONENT
MOUNTING METHOD UNTHREADED HOLE 1ST GROUP SLOT 2ND GROUP
MOUNTING FACILITY QUANTITY 2 ALL GROUPINGS
MOUNTING HOLE DIAMETER 0.500 INCHES MINIMUM AND 0.530 INCHES MAXIMUM 1ST GROUP
MOUNTING SLOT WIDTH 0.500 INCHES MINIMUM AND 0.530 INCHES MAXIMUM 2ND GROUP
DISTANCE BETWEEN MOUNTING FACILITY CENTERS 3.297 INCHES MINIMUM AND 3.327 INCHES MAXIMUM SINGLE MOUNTING FACILITY ALL CENTER GROUPINGS
INCLOSURE TYPE FULLY INCLOSED
OVERALL LENGTH 5.860 INCHES MINIMUM AND 5.890 INCHES MAXIMUM
OVERALL HEIGHT 4.970 INCHES MINIMUM AND 5.030 INCHES MAXIMUM
OVERALL WIDTH 3.720 INCHES MINIMUM AND 3.780 INCHES MAXIMUM
RELIABILITY INDICATOR NOT ESTABLISHED
SPECIAL FEATURES 1 PRIMARY WINDING; 5 SECONDARY WINDINGS
III TRANSFORMER WINDING CONNECTION TYPE DELTA-WYE
(NON-CORE DATA) CUBIC MEASURE 111.98 CUBIC INCHES

Restrictions/Controls & Freight Information | NSN 5950-01-191-9622

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Category Code Description
No Freight Information