Product Details | QUARTZ CRYSTAL UNIT

5955-01-333-6194 An item which consists of a quartz crystal resonator(s), suitably mounted in a HOLDER, QUARTZ CRYSTAL.

Part Alternates: AD84741, 5955-01-333-6194, 01-333-6194, 5955013336194, 013336194

Electrical and Electronic Equipment Components | Oscillators and Piezoelectric Crystals

Supply Group (FSG) NSN Assign. NIIN
59 08 FEB 1991 01-333-6194

Drawings & Photos | NSN 5955-01-333-6194


Cross Reference | NSN 5955-01-333-6194

Part Number Cage Code Manufacturer
AD84741 23386 THALES DEFENSE & SECURITY, INC
AD84741 K0162 THALES UK LIMITED
AD84741 K0215 RACAL COMMUNICATIONS SYSTEMS LTD

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5955-01-333-6194

Technical Data | NSN 5955-01-333-6194

Characteristic Specifications
MODE OF OSCILLATION FUNDAMENTAL
CIRCUIT RESONANCE ANTIRESONANCE
LOAD CAPACITANCE IN PICOFARADS 30.0 NOMINAL
SPECIFIED FREQUENCY 6.400 MEGAHERTZ
FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT -0.0005 TO 0.0005
OPERATING TEMP RANGE -10.0 TO 60.0 DEG CELSIUS
EQUIVALENT RESISTANCE VALUE IN OHMS 40.0 MAXIMUM
DRIVE LEVEL RATING 0.5 MILLIWATTS NOMINAL
STYLE DESIGNATOR 3 OVAL BODY, WIRE LEADS
OVERALL LENGTH 0.530 INCHES MAXIMUM
TERMINAL LENGTH 0.500 INCHES MINIMUM
OVERALL WIDTH 0.435 INCHES MAXIMUM
BODY WIDTH 0.402 INCHES MAXIMUM
BODY THICKNESS 0.150 INCHES MAXIMUM
OVERALL THICKNESS 0.183 INCHES MAXIMUM
TERMINAL DIAMETER 0.016 INCHES MINIMUM AND 0.019 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN TERMINALS 0.184 INCHES MINIMUM AND 0.200 INCHES MAXIMUM
HOLDER COVER MATERIAL METAL
III END ITEM IDENTIFICATION 5865-01-188-3309 JAMMER SYSTEM,RESPONCE AN/ULQ-19(V)1

Restrictions/Controls & Freight Information | NSN 5955-01-333-6194

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodeNThere is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials
Demilitarization Code:QStrategic List Item (SLI). Demilitarization not required. SLI are non-MLI(Munitions List Items) controlled by the U.S. Dept. of Commerce through the Export Administration Regulations (EAR) and indicated on the Commerce Control List (CCL). Each CCL entry is preceded by a four-digit Export Control Commerce Control List Item (CCLI) – MUT to the point of scrap required outside the United States. Inside the United States, MUT is required when the DEMIL integrity code (IC) is “3” and MUT is not required when the DEMIL IC is “6.”
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 063025 SEMICONDUCTORS/DEVICES NOI ETC
Less than car load rating
Less than truck load rating W Rating Variable
Water commodity Code 72D unknown
Originating Activity Code TH Defense Supply Center Columbus
Columbus, OH 43215
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 5955-01-333-6194

Category Code Description
Stores Account Code1Marine Corps Stock Fund Account Item.
Combat Essentiality Code5Critical Repair Part to a Combat Essential End Item. Those parts or components whose failure in a combat essential end item will render the end item inoperative or reduce its effectiveness below the minimum acceptable level of efficiency.
Materiel Management CodeBAll CommoditiesDefense Logistics Agency, (DLA,)
Echelon Management Code2ICP/DSSC Marine Corps-managed Recoverability Code D items and Defense Logistics Agency (DLA)/TACOM/GSA) items which the integrated manager has not decontrolled.
Physical Category Code1Bin
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDMU.S. Marine Corps
Service OrganizationMU.S. Marine Corps
ReparabilityZNonreparable item. When unserviceable, condemn and dispose at the level indicated by the first digit of the maintenance code.
Acquisition Advice CodesZINSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each
Category Code Description
Cognizance Codes9BNavy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDNDepartment of the Navy
Service OrganizationNU.S. Navy
Acquisition Advice CodesZINSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each