Product Details | LINEAR MICROCIRCUIT

5962-01-589-8597 A microcircuit whose output is a function of the input; that is, the output varies in a predetermined and essentially predictable manner from the input signal.

Part Alternates: CY7B991V, CY7B991V5JXI, CY7B991V-5JXI, 5962-01-589-8597, 01-589-8597, 5962015898597, 015898597

Electrical and Electronic Equipment Components | Microcircuits, Electronic

Supply Group (FSG) NSN Assign. NIIN
59 06 NOV 2010 01-589-8597

Cross Reference | NSN 5962-01-589-8597

Part Number Cage Code Manufacturer
CY7B991V 65786 CYPRESS SEMICONDUCTOR CORPORATION
CY7B991V-5JXI 65786 CYPRESS SEMICONDUCTOR CORPORATION

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5962-01-589-8597

Technical Data | NSN 5962-01-589-8597

Characteristic Specifications
OVERALL WIDTH 0.485 INCHES MINIMUM AND 0.495 INCHES MAXIMUM
BODY HEIGHT 0.065 INCHES MINIMUM AND 0.095 INCHES MAXIMUM
TERMINAL SURFACE TREATMENT SOLDER
VOLTAGE RATING AND TYPE PER CHARACTERISTIC -0.5 VOLTS MINIMUM INPUT AND 7.0 VOLTS MAXIMUM INPUT
INCLOSURE MATERIAL PLASTIC
OVERALL LENGTH 0.585 INCHES MINIMUM AND 0.595 INCHES MAXIMUM
OPERATING TEMP RANGE -40.0/+85.0 DEG CELSIUS
PART NAME ASSIGNED BY CONTROLLING AGENCY 3.3 V ROBOCLOCK LOW VOLTAGE PROGRAMMABLE SKEW CLOCK BUFFER
BODY LENGTH 0.547 INCHES MINIMUM AND 0.553 INCHES MAXIMUM
STORAGE TEMP RANGE -65.0/+150.0 DEG CELSIUS
FEATURES PROVIDED LOW VOLTAGE AND PROGRAMMABLE AND W/CLOCK AND HIGH PERFORMANCE
BODY WIDTH 0.447 INCHES MINIMUM AND 0.453 INCHES MAXIMUM
SUPPLEMENTARY FEATURES ACCURACY 500 PS/PB-FREE
INCLOSURE CONFIGURATION QUAD-IN-LINE
DESIGN FUNCTION AND QUANTITY 1 BUFFER
TERMINAL TYPE AND QUANTITY 32 J-HOOK
OVERALL HEIGHT 0.120 INCHES MINIMUM AND 0.140 INCHES MAXIMUM

Restrictions/Controls & Freight Information | NSN 5962-01-589-8597

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodeNThere is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials
Demilitarization Code:QStrategic List Item (SLI). Demilitarization not required. SLI are non-MLI(Munitions List Items) controlled by the U.S. Dept. of Commerce through the Export Administration Regulations (EAR) and indicated on the Commerce Control List (CCL). Each CCL entry is preceded by a four-digit Export Control Commerce Control List Item (CCLI) – MUT to the point of scrap required outside the United States. Inside the United States, MUT is required when the DEMIL integrity code (IC) is “3” and MUT is not required when the DEMIL IC is “6.”
Controlled Inventory Item Code:UUNCLASSIFIED
Electro-static Discharge Susceptible:BESD sensitivity
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 061700 ELEC APPLIANCES/INSTRUMENTS NOI
Less than car load rating
Less than truck load rating W Rating Variable
Water commodity Code 72D unknown
Originating Activity Code SX Oklahoma City Air Logistics Center
Tinker AFB, OK 73145-3043
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo 3 Electrostatic Sensitive Device (ESD), subject to damage caused by electrostatic discharge. (See DoD 4500.32-R, Volume 1, Appendix A, Section I for additional information on ESD devices).

Management | NSN 5962-01-589-8597

Category Code Description
Budget Code9 General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.
Price ValidationN The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
  • The price has not been analyzed or reviewed for accuracy.
  • ZOP or Standard price challenges are permissible, but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ?L? or?F?,the case must be evaluated locally where purchased or fabricated.
Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDFDepartment of the Air Force
Service OrganizationFU.S. Air Force
ReparabilityNStock Fund (except Munitions)
Acquisition Advice CodesZINSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each