Product Details | WASHER INSULATOR

5970-01-057-9667 An insulator that is essentially thin and flat, with one through hole centrally located. The general shape may vary by the addition of features such as beveled edges, indented surfaces, through hole keys, and/or peripheral flats. The thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. The thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. Excludes items with more than one hole. See also INSULATOR, DISK; INSULATOR, BEAD; INSULATOR, BUSHING; and INSULATOR, PLATE

Part Alternates: A57T00011, A57T0001-1, 5970-01-057-9667, 01-057-9667, 5970010579667, 010579667

Electrical and Electronic Equipment Components | Electrical Insulators and Insulating Materials

Supply Group (FSG) NSN Assign. NIIN
59 22 MAR 1978 01-057-9667

Drawings & Photos | NSN 5970-01-057-9667


Cross Reference | NSN 5970-01-057-9667

Part Number Cage Code Manufacturer
A57T0001-1 12464 MCDONNELL DOUGLAS CORP MCDONNELL DOUGLAS ELECTRONIC SYSTEMS

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5970-01-057-9667

Technical Data | NSN 5970-01-057-9667

Characteristic Specifications
STYLE DESIGNATOR Q3 ROUND, FLAT
INSIDE DIAMETER 0.320 INCHES MINIMUM AND 0.340 INCHES MAXIMUM
OUTSIDE DIAMETER 0.593 INCHES MINIMUM AND 0.607 INCHES MAXIMUM
OVERALL HEIGHT 0.050 INCHES MINIMUM AND 0.070 INCHES MAXIMUM
FIRST KEY WIDTH 0.350 INCHES MINIMUM AND 0.370 INCHES MAXIMUM
FIRST KEY THICKNESS 0.060 INCHES MINIMUM AND 0.080 INCHES MAXIMUM
MATERIAL AND LOCATION OVERALL PLASTIC, DIALLYL PHTHALATE, MIL-M-14, TYPE SDI-5
MANUFACTURERS CODE 12464
DESIGN CONTROL REFERENCE A57T0001-1

Restrictions/Controls & Freight Information | NSN 5970-01-057-9667

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
NMF Description 103300 INSULATING MATERIAL NOI
Less than car load rating
Less than truck load rating W Rating Variable
Water commodity Code 72D unknown
Originating Activity Code SU Ogden Air Logistics Center
Hill AFB, UT 84056-5609
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 5970-01-057-9667

Category Code Description
Cognizance Codes9BNavy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDNDepartment of the Navy
Service OrganizationNU.S. Navy
Acquisition Advice CodesJNOT STOCKED, CENTRALLY PROCURED # (NON-STOCKED ITEMS) IMM/Service centrally managed but not stocked item. Procurement will be initiated only after receipt of a requisition.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each