Product Details | ELECTRICAL CONDUIT ELBOW

5975-01-382-7394 An item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

Part Alternates: CH090340004, CH09-0340-004, G631594, G63159-4, 101000, 10250674-4, 150134, 5975-01-382-7394, 01-382-7394, 5975013827394, 013827394, 102506744

Electrical and Electronic Equipment Components | Electrical Hardware and Supplies

Supply Group (FSG) NSN Assign. NIIN
59 09 NOV 1993 01-382-7394

Drawings & Photos | NSN 5975-01-382-7394


Demand History | NSN 5975-01-382-7394

Part Number Request Date QTY Origin
5975-01-382-7394 2025-11-329 16 DIBBS
5975-01-382-7394 2025-10-283 25 DIBBS
5975-01-382-7394 2025-10-283 18 DIBBS
5975-01-382-7394 2025-10-275 25 DIBBS
5975-01-382-7394 2025-10-275 18 DIBBS
5975-01-382-7394 2021-10-280 17 DIBBS
5975-01-382-7394 2021-01-19 31 DIBBS
5975-01-382-7394 2019-05-132 133 DIBBS
5975-01-382-7394 2018-02-37 73 DIBBS
5975-01-382-7394 2017-10-290 29 DIBBS
5975-01-382-7394 2017-06-171 26 DIBBS
5975-01-382-7394 2017-03-89 30 DIBBS
5975-01-382-7394 2016-05-124 23 DIBBS
5975-01-382-7394 2016-02-48 20 DIBBS
5975-01-382-7394 2016-01-13 16 DIBBS
5975-01-382-7394 2015-10-281 9 DIBBS
5975-01-382-7394 2014-11-318 6 DIBBS
5975-01-382-7394 2014-11-310 6 DIBBS
5975-01-382-7394 2012-05-128 1 DIBBS
5975-01-382-7394 2012-02-33 1 DIBBS
5975-01-382-7394 2012-01-25 1 DIBBS
5975-01-382-7394 2012-01-18 1 DIBBS
5975-01-382-7394 2012-01-03 1 DIBBS
5975-01-382-7394 2009-08-221 6 DIBBS
5975-01-382-7394 2009-07-186 3 DIBBS

Cross Reference | NSN 5975-01-382-7394

Part Number Cage Code Manufacturer
101000 81482 PAGE CHESTER, LTD. DBA COOPERATIVE INDUSTRIES
10250674-4 18876 U S ARMY AVIATION AND MISSILE COMMAND
150134 05593 ICORE INTERNATIONAL, INC.
CH09-0340-004 06090 TYCO ELECTRONICS CORPORATION
G63159-4 06324 GLENAIR, INC.

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5975-01-382-7394

Technical Data | NSN 5975-01-382-7394

Characteristic Specifications
STYLE DESIGNATOR A39 PULLING
LEG END TO PLANE OF BEND DISTANCE 2.760 INCHES NOMINAL SINGLE END
INSIDE DIAMETER 0.950 INCHES NOMINAL SINGLE END
MATERIAL BRASS
SURFACE TREATMENT CHROMATE
CONSTRUCTION TYPE ONE PIECE
END TYPE EXTERNAL THREAD FIRST END EXTERNAL THREAD SECOND END
DEFLECTION ANGLE 90.0 DEGREES
FURNISHED ITEMS HEX COUPLING NUT

Restrictions/Controls & Freight Information | NSN 5975-01-382-7394

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
NMF Description 062010 FITTINGS CONDUIT NOI
Less than car load rating
Less than truck load rating W Rating Variable
Water commodity Code 713 unknown
Originating Activity Code CH Defense Supply Center Richmond
Richmond, VA 23297
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 5975-01-382-7394

Category Code Description
Materiel Category and Inventory ManagerQ Electronics Materiel (DLA/GSA Items)
Appropriation and Budget Activity2 Stock Fund Secondary Items
Management Inventory Segment2 NONREPARABLE ITEMS (Exclusive of Insurance and Provisioning Items). This code will be used to identify items which are not reparable.
Specific Group/Generic Code0 Medical Materiel
Weapons Systems/End Item or Homogeneous Group00DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
Accounting Requirements CodeX Expendable item. An item of Army property coded with an ARC of ?X? in the AMDF. Expendable items require no formal accountability after issue from a stock record account. Commercial and fabricated items similar to items coded ?X? in the AMDF are considered expendable items.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDADepartment of the Army
Service OrganizationAU.S. Army
ReparabilityZThis is a nonreparable item. If condemned or economically unserviceable, then dispose at the level authorized replace the item.
Acquisition Advice CodesZINSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each